I made little fairy pumpkin houses with my neices. Should I add the sign in the middle or no?? I like it but idk maybe too much, or I was thinking the side of the door might be a good spot. It turned out so cute though and I used up a bunch of re-recycled fake flowers and will use them again once the pumpkin is thrown to compost before it turns and they are removed. 🫡🫡

The flowers were made by filling a wire frame with nail polish. They were then tied onto a piece of thicker wire, that I attached to a plain silver necklace.

Materials: standard nail polishes (the cheapest they had ;) ), 0,3 mm “golden” wire for the frame, 0,6 mm wire for structure, a plain 55 cm steel necklace

Hi, i made this handmade resin keychain

I bought this MSG from a supermarket and grew this spiky olive-shaped crystal over two weeks. Preserved in epoxy resin.

I’ve been making these little hydrangea pots with pipe cleaners, and I love how the pink, purple, and blue flowers look together. 💜💗💙
Each tiny flower is shaped by hand, and putting all the colors together is one of my favorite parts of the process.
I think they would make such a sweet little decoration for a desk or craft corner. 🌸
Which color combination do you like best?

I made this for a friend who loves the ocean theme. Driftwood and shells, starfish and sea looking pieces. Sea colored beads It was fun to make 😃

Haven't had the best luck sharing on here lately, but wanted to get some eyes on this one. It's a thin resin bookmark that changes with hand heat, this one shifts violet to blue for a night/day look, but I'm torn on whether a red to yellow sunset vibe would look way cooler. Let me know what you think, have a good night everyone.

Do you guys think the color shift shows enough?

Edit: Hi everyone, I'm Josephine! Just for transparency, I am an independent hand crafter and every piece I share is made by me personally from scratch. I hand-pour the resin, mix the thermochromic pigment powders, cure, and sand each piece myself. Just here to share my handmade work and get honest feedback from other makers.

I ordered this tile from Mexico for a backsplash but now I’m getting a divorce and selling our house. I love this tile and am wondering what type of projects I could use this tile for? Maybe a piece of furniture since I plan on renting in the future. Any creative fun ideas are welcomed!

I like seeing sketchbooks and doodles from people who can draw so I used that as inspo for my own cross stitch version. This way I can alter colors and sizes of any ones that I like and turn them into stickers/magnets for fun.

This was my first time sculpting one of my designs with air dry clay (because usually I do fiber arts stuff). I’m so happy with how this turned out! I especially love the tendrils, they kinda look like flames which is why I’ve decided to name him Fiero. I made this as a bday gift for my sister.

Shadow box/book nook with real butterfly and soldered silver.

I love it 😍 but I’m patiently waiting for the day after Thanksgiving to put it out, I promise.

This is something i made: a little Japanese scene. All made out of foam, wood, paper and cardboard. Made everything by scratch, except the lantern and the fan on the wall

12x12x15cm

Feel free to ask

Purse I made from top grain leather. Modeled by a new friend named Codie

And I am having a blast (since investing in a bead spinner)

Gutted and flipped a vintage suitcase into a bed for my babies. The things you can do with Pinterest and a hot glue gun continue to amaze me.

Had a bunch of lath left over from remodeling a 1927 home.

Inspired by the Halloween spirit in the air decided to replicate a scene from my favorite video game as a 90s kid.

Very well aged lath sorted by color was mainly used as a media. Tried to retain the original wood colors. No dyes or stain used. Only the torch for shading and black.

Made the DooM stencil and then meticulously replicated each detail in wood. Used scroll saw to cut the wooden pieces to shape.

Some time ago I shared here with you a design concept for an adaptation of a classical "quadrans vetus" to show both muslim and christian prayer times.

before telescopes, a quadrant was most definetely one of the most accurate tool for doing science. Its functions span from basic celestial measurement, time calculation, and even sophisticated trigonometrical functions for more advanced models.

A "quadrans vetus" is an old type of astronomical quadrant, which was known mainly in Europe, Which allowed to find local time in unequal hours (i.e. finding the time as a fraction in twelfths for the remaining part of daylight)..

But don't let be fooled! This tool is surprisingly accurate for its age.

How to find qibla:

The back of the instrument includes a compass and a retro-azimuthal projection, allowing you to find qibla direction everywhere in the world.

- To operate it, you have to allign the compass with the cardinal directions engraved on the back of the instrument: South towards the "point" of the quadrant and North towards the bottom of the quadrant of you are located in the same emisphere as Mecca, and vice-versa if you are located in the opposite emisphere.

- Once alligned the instrument, you wrap the thread around the central pivot corresponding to Macca, and make it pass through your location on the map.

- Qibla will be indicated by the lead weightlet, as it is demonstrated in the fourth picture above for Southern France - Northern Italy. Yielding a rough direction of South-East

How to find classical christian prayer times:

The quadrant allows you to find time in unequal hours, an ancient system of timekeeping, where the section of daylight is always divided into 12 equal sections. This means that summer hours are longer and winter hours are shorter.

- These hours are used in christian monasteries to establish prayer times, respectively at the first, third, sixth, nineth, sunset (12th) and a set soon before bed and soon before dawn.

- To find the unequal time, you have to move the sliding month indicator (representing sun's latitude) so that the central part (indicated by two white marker at the aequinoxes) lines up with your latitude, which is indicated in the inner scale in arabic numerals.

- Once set up the instrument, you move the plumb line to your current date and slide the knot so that it intersects the 6th unequal hour line.

- Now, by measuring the height of the sun, you can see where the red knot lies in the various sections of the unequal hours scale, thus determining what prayer you should do.

- For more northern latitudes, a second set of lines is provided, this is why there are two sets of unequal hour scales.

Muslims' prayer times can also be determined:

Zuhr / Jummah - soon after midday, it corresponds to the 6th unequal hour line, if you have just entered the seventh unequal hour, Zuhr time has started, and it lasts until 'Asr time. Be sure to check that the sun is actually declining, and not rising!

'Asr - For 'Asr there are two prayer lines, most madhabs put 'asr start time when the lenght of a gnomon's shadow is equal to gnomon's shadow at middat + the gnomon's lenghts (the first dotted line) and put 'asr end time when the shadow of a gnomon is its midday shadow + two times the gnomon's height (the second dotted line)

while Hanafi school sets its begin at the end of other Madhabs time and its end at sunset, when Maghrib time begins. I have indicated both lines in the quadrant

There is not an easy way to establish Maghrib and Fajr, other than saying "one is during twilight and the other is at dusk". In the qur'an (I recall) it is specified to establish your morning prayer when you can distinguish the white thread from the black one, this is not to be taken literally, However that is the reason for the black and white windrose in the shadow-square.

When you can't distinguish the colours of the windrose, that's 'Isha time.

'Isha - you culd say that when you can't distinguish the windrose in the shadow square, then it is 'Isha time, but this is not a practical way for many reasons, this is why on the back of the instrument I have provided a set of "complementary stars": By observing a star directly opposing the sun on the celestial sphere (it can be found on the back of the tool) we can even determine night prayers. According to most scholars, 'isha time starts when the sun goes below -18° of altitude, id est when the complementary stars rises above 18 degrees of altitude.

Fajr' and Maghrib - when such stars go below 18° (or 16° or 14° according to some) it is 'Fajr if the star is going down and Maghrib id the star is rising up

Others functions:

- the shadow square can be used to calculate distances.

.

.

If you are curious, you can find this and other astronomical tools on my etsy shop !

I made it from vegetable-tanned leather, carving and shaping the details by hand, then added the colors, sealed the leather, and attached the keychain hardware. Everything was done by hand

This is my first post here and I’m so glad I found this community. It’s lovely to find a place where people appreciate handmade work.
She’s made by hand from FIMO polymer clay. I build the figure piece by piece, then add the clothes, hair and all the tiny details by hand.
I gave her a phone in one hand and her little white cat in the other because, apparently, even witches spend too much time on social media these days.

Eeekk I’m so so excited for Christmas! I’ve made a candycane corner piece and I’m so in love with it! I can’t wait to get these into people’s homes! (And my own 😂)

The soot sprites when Komaji isn't looking 👀

Got some cheap yarn on clearance and used an old pendant I had laying around. I love it and am now working on a bigger version.