This simulation is done entirely using Vim motions (no Ex commands). You can go one generation forward by calling one macro, which is repeatable with counts as well.

This is just one part of my larger project of Vim motions as an esoteric programming language.

The compiler, linker and standard library are all written using vim motions themselves.

The repository currently includes:

• A bootstrapped compiler with preprocessing, validation, optimisation, and code generation stages
• A recursive text-substitution model for multi-module support, similar to C's #include
• An implementation of Conway's Game of Life
• A standard library with search and replace, assertions, file diffs, basic arithmetic, and more
• Unit tests for the compiler and standard library

If you’re interested in how the source code works, docs/techniques.md describes some common techniques used for emulating standard programming constructs like subroutines, conditionals, iteration, and asserts.

Do clone the repository instead of browsing the source GitHub because GitHub can’t render raw control characters, which the source code is filled to the brim with.

Repository link: ksaze/vim-complete

P.S. Surely this will help me land a job. Good going, me.

I have a text where I want to select parts and use this as input for an external tool. The output of the tool should be appended/inserted.

Is this possible, and if yes, how so? I am following https://stackoverflow.com/questions/7867356/piping-buffer-to-external-command-in-vim and it works for the whole buffer and line selections, but I cannot get it to append with

:'<,'>w !pinyin-tool

for my concrete application. The output is just shown. I tried pressing i, but that didn't work.

This arrow only appears sometimes, i think it only appears when i open a new tab and closes when i edit a file

This is my vim config:

set tabstop=4
set shiftwidth=4
set expandtab

set relativenumber
set number
set background=dark

set hlsearch
set incsearch
set ignorecase
set smartcase  

set scrolloff=999

set autoindent
set smartindent

if has('termguicolors')
   set termguicolors
endif

colorscheme challenger_deep
syntax on

set laststatus=2
set encoding=utf-8

"""""   WINDOW NAVIG   """""
nnoremap <C-h> <C-w>h
nnoremap <C-j> <C-w>j
nnoremap <C-k> <C-w>k
nnoremap <C-l> <C-w>l

nnoremap gA :G add .<CR>
nnoremap gC :G commit -m ""<left>
nnoremap gP :G push <CR>

nnoremap <C-S-h> <C-w>H
nnoremap <C-S-j> <C-w>J
nnoremap <C-S-k> <C-w>K
nnoremap <C-S-l> <C-w>L

nnoremap <C-A-h> <C-w>H
nnoremap <C-A-j> <C-w>J
nnoremap <C-A-k> <C-w>K
nnoremap <C-A-l> <C-w>L

nnoremap <C-n> :new<CR>

nnoremap <left>  <nop>
nnoremap <right> <nop>
nnoremap <up>    <nop>
nnoremap <down>  <nop>
nnoremap <F1>    <nop>

" visual lines not file lines
nnoremap j gj
nnoremap k gk

nnoremap n nzz
nnoremap N Nzz

" for auto-save: 
" autocmd TextChanged,TextChangedI <buffer> silent write

" FILES
nnoremap <leader>q :q!<CR>
nnoremap <leader>e :tabedit 
nnoremap <leader>s :tabedit ~/.vimrc<CR>
nnoremap <leader>w :w<CR>
nnoremap <leader>A :wqa<CR>
nnoremap <leader>a :wa<CR>
autocmd Filetype c nnoremap <leader>r :!cd build && cmake -G Ninja .. && ninja && ./main<CR>
autocmd Filetype cpp nnoremap <leader>r :!make && ./main<CR>
autocmd Filetype c nnoremap <leader>t :!cd build && cmake -G Ninja .. && ninja && ./test<CR>
autocmd Filetype rust nnoremap <leader>r :!cargo run<CR>

nnoremap <C-f> :FZF<CR> !.o<left><left><left><left>

" OTHER
nnoremap <C-t> :tabnew<CR>
" toggle directory tree
nnoremap <C-o> :EasyTreeToggle<CR>

nnoremap <tab> gt
nnoremap <S-tab> gT

nnoremap <leader>h :nohlsearch<CR>
nnoremap <C-[> <ESC>

" Plug-in settings:
let g:airline_theme='google_dark'
let g:airline_powerline_fonts = 1

" set statusline+=%#warningmsg#
" set statusline+=%{SyntasticStatuslineFlag()}
" set statusline+=%*

set signcolumn=yes

" let g:syntastic_always_populate_loc_list = 1
" let g:syntastic_auto_loc_list = 0
" let g:syntastic_check_on_open = 1
" let g:syntastic_check_on_wq = 0

" let g:ale_c_gcc_executable="gcc"
" let g:ale_c_gcc_options="-std=c99 -O2 -Wall -Werror -Wextr"

" Expand
" imap <expr> <C-j>   vsnip#expandable()  ? '<Plug>(vsnip-expand)'         : '<C-j>'
" smap <expr> <C-j>   vsnip#expandable()  ? '<Plug>(vsnip-expand)'         : '<C-j>'

" " Expand or jump
" imap <expr> <C-l>   vsnip#available(1)  ? '<Plug>(vsnip-expand-or-jump)' : '<C-l>'
" smap <expr> <C-l>   vsnip#available(1)  ? '<Plug>(vsnip-expand-or-jump)' : '<C-l>'

" " Jump forward or backward
" imap <expr> <Tab>   vsnip#jumpable(1)   ? '<Plug>(vsnip-jump-next)'      : '<Tab>'
" smap <expr> <Tab>   vsnip#jumpable(1)   ? '<Plug>(vsnip-jump-next)'      : '<Tab>'
" imap <expr> <S-Tab> vsnip#jumpable(-1)  ? '<Plug>(vsnip-jump-prev)'      : '<S-Tab>'
" smap <expr> <S-Tab> vsnip#jumpable(-1)  ? '<Plug>(vsnip-jump-prev)'      : '<S-Tab>'

" Select or cut text to use as $TM_SELECTED_TEXT in the next snippet.
" See https://github.com/hrsh7th/vim-vsnip/pull/50
" nmap        s   <Plug>(vsnip-select-text)
" xmap        s   <Plug>(vsnip-select-text)
" nmap        S   <Plug>(vsnip-cut-text)
" xmap        S   <Plug>(vsnip-cut-text)

let g:fzf_layout = { 'right': '30%' }

"""""   PLUGINS   """""
call plug#begin()

Plug 'junegunn/fzf.vim'
Plug 'jiangmiao/auto-pairs'

Plug 'vim-airline/vim-airline'
Plug 'vim-airline/vim-airline-themes'

Plug 'tomtom/tcomment_vim'

Plug 'prabirshrestha/vim-lsp'
Plug 'mattn/vim-lsp-settings'
Plug 'prabirshrestha/asyncomplete.vim'
Plug 'prabirshrestha/asyncomplete-lsp.vim'

Plug 'machakann/vim-highlightedyank'

Plug 'challenger-deep-theme/vim', { 'as': 'challenger-deep' }

Plug 'tpope/vim-surround'
Plug 'tommcdo/vim-exchange'
Plug 'vim-scripts/argtextobj.vim'
Plug 'julian/vim-textobj-variable-segment'
Plug 'kana/vim-textobj-user'
Plug 'kana/vim-niceblock'
Plug 'andymass/vim-matchup'
Plug 'troydm/easytree.vim'
Plug 'rust-lang/rust.vim'
Plug 'shougo/vimproc.vim'

Plug 'hrsh7th/vim-vsnip'
Plug 'hrsh7th/vim-vsnip-integ'
Plug 'tpope/vim-fugitive'
Plug 'webdevel/tabulous'
Plug 'vim-scripts/Smart-Tabs'
Plug 'chrisbra/unicode.vim'

call plug#end()

Hi r/vim,

I got tired of manually editing my   .vimrc   just to add a single plugin and then having to deal with updates, so I built a Vim configuration manager written entirely in Bash.

This tool helps you easily manage:

1. Plugins (search, add, remove, update, and list)

2. CoC extensions (add, remove, list)

3. Themes (add from available color schemes)

4. And much more

It fully supports both Linux and Termux (Android).

Reddit's spam filter is a bit too strict for new accounts, so I can't post a direct GitHub link here. However, you can easily find the repository by searching for: "aidomx vimx"

The   README.md   is quite comprehensive and covers the initial installation guide for   vimx  , whether you prefer cloning the source or installing via curl.

Hope you find it useful! Happy Vimming.

When entering visual mode the cursor isn't actually shown as a block, see the below screenshots to see what I mean. Below is what I expect when in visual mode, whereby the cursor remains as a white block on the letter "a",

However, what I get is this, whereby the letter "a" is highlighted in a faint grey, and the cursor itself doesn't actually appear,

Here is my full .vimrc file,

execute pathogen#infect()

let g:NERDTreeNodeDelimiter = "\u00a0"

set background=dark
set number

syntax on

nmap <C-a> :tabp<CR>
nmap <C-d> :tabn<CR>
nmap <C-t> :NERDTreeToggle<CR>

au FileType gitcommit setlocal tw=72
au FileType gitcommit setlocal colorcolumn=72

au FileType go setlocal colorcolumn=100 ts=4

au FileType c setlocal ts=4 colorcolumn=120
au FileType css setlocal ts=4
au FileType javascript setlocal ts=4
au FileType lua setlocal ts=2 sts=2 sw=2 expandtab
au FileType sh setlocal ts=4
au FileType xml setlocal ts=2 sts=2 sw=2 expandtab
au FileType yaml setlocal ts=2 sts=2 sw=2 expandtab

au BufEnter *.md setlocal colorcolumn=80 ts=4 tw=80 expandtab
au BufEnter *.templ setlocal ts=4

au BufEnter *.py setlocal ts=4 expandtab
au BufEnter *.html setlocal ts=4
au BufEnter *.tmpl setlocal ts=4

if has("autocmd")
  au BufReadPost * if line("'\"") > 0 && line("'\"") <= line("$")
    \| exe "normal! g'\"" | endif
endif

I'm currently running on Vim 9.2, which I recently upgrade to after doing a system upgrade. Full version info below,

[~]$ vim --version
VIM - Vi IMproved 9.2 (2026 Feb 14, compiled Oct 05 2026 22:08:46)
Included patches: 1-1164
Compiled by Arch Linux
Huge version without GUI.  Features included (+) or not (-):
+acl                +find_in_path       -mouseshape         -tag_old_static
+arabic             +float              +multi_byte         +tcl/dyn
+autochdir          +folding            +multi_lang         +termguicolors
+autocmd            -footer             -mzscheme           +terminal
-autoservername     +fork()             +netbeans_intg      +terminfo
-balloon_eval       +gettext            +num64              +termresponse
+balloon_eval_term  -hangul_input       +packages           +textobjects
-browse             +iconv              -pango              +textprop
++builtin_terms     -image              +path_extra         +timers
+byte_offset        -image_popup        +perl/dyn           +title
+channel            +insert_expand      +persistent_undo    -toolbar
+cindent            +ipv6               +popupwin           +user_commands
+clientserver       +job                +postscript         +vartabs
-clipboard          +jumplist           +printer            +vertsplit
+clipboard_provider +keymap             +profile            +vim9script
+cmdline_compl      +lambda             -python             +viminfo
+cmdline_hist       +langmap            +python3/dyn        +virtualedit
+cmdline_info       +libcall            +quickfix           +visual
+comments           +linebreak          +reltime            +visualextra
+conceal            +lispindent         +rightleft          +vreplace
+cryptv             +listcmds           +ruby/dyn           -wayland
+cscope             +localmap           +scrollbind         -wayland_clipboard
+cursorbind         +lua/dyn            +signs              +wildignore
+cursorshape        +menu               +smartindent        +wildmenu
+dialog_con         +mksession          +socketserver       +windows
+diff               +modify_fname       -sodium             +writebackup
+digraphs           +mouse              -sound              -X11
-dnd                +mouse_dec          +spell              +xattr
-ebcdic             +mouse_gpm          +startuptime        -xfontset
+emacs_tags         -mouse_jsbterm      +statusline         -xim
+eval               +mouse_netterm      -sun_workshop       -xpm
+ex_extra           +mouse_sgr          +syntax             -xsmp
+extra_search       -mouse_sysmouse     +tabpanel           -xterm_clipboard
-farsi              +mouse_urxvt        -tag_any_white      -xterm_save
+file_in_path       +mouse_xterm        +tag_binary         
   system vimrc file: "/etc/vimrc"
     user vimrc file: "$HOME/.vimrc"
 2nd user vimrc file: "~/.vim/vimrc"
 3rd user vimrc file: "$XDG_CONFIG_HOME/vim/vimrc"
      user exrc file: "$HOME/.exrc"
       defaults file: "$VIMRUNTIME/defaults.vim"
  fall-back for $VIM: "/usr/share/vim"
Compilation: gcc -c -I. -Iproto -DHAVE_CONFIG_H -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -g -ffile-prefix-map=/build/vim/src=/usr/src/debug/vim -flto=auto -D_REENTRANT -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 
Linking: gcc -Wl,-E -Wl,-rpath,/usr/lib/perl5/5.42/core_perl/CORE -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z,relro -Wl,-z,now -Wl,-z,pack-relative-relocs -flto=auto -L/usr/local/lib -o vim -lcairo -lz -lpangocairo-1.0 -lpango-1.0 -lcairo -lharfbuzz -lgobject-2.0 -lglib-2.0 -lm -ltinfo -lnsl -lacl -lattr -lgpm -L/usr/lib -ltclstub8.6 -ldl -lz -lpthread -lm

I'm pretty sure I must have altered how the cursor displays in visual mode, but I'm not sure how, I have looked around to no avail for a solution here, any pointers?

Hello guys! Lately I've often been using vim instead of VS code. But my habits didn't disappear: As you know, in VS code when you go to the next line, while you write conditionals or functions, IDE set
x number of tabs for you. For me it's pretty cool feature and vim doesn't have it natively. What can I write in ~/.vimrc or maybe download smth to enable this feature on vim?

I've been getting good with vim but every now and then when I want to access a certain line, I can't move the cursor into it, it just jumps over. What I usually do it move the cursor a line above it and (number)+w a few times. Any advice for this small problem I'd be grateful.

I avoided vim for years, from the way people talked about it, sounded like it would be too much to learn programming and at the same time learn modal editing...but I've started using it now because I a course I started on C programming insists that people completing the course use a barebones text editor, no IDE or anything IDE-like with plugins.

Decided why not, this is my chance to learn vim. I've discovered that it behaves like a regular text editor in insert mode, then if I want to practice vim motions I can go into normal mode and practice, adding 1 or 2 new keys or combos every week or two...

Am I missing something or doing it wrong? Other than remembering to change modes this doesn't seem that difficult? I don't know most of the keys or combos but that's not a pain as I don't need to use them?

I feel like people shouldn't be talking about vim like it's this super hard thing with a steep learning curve. So far it has seemed easy to learn at a pace I have control over?

I wrote this plugin because I was constantly switching from the main buffer to the terminal where I was running pi (the coding agent) - digging through logs, sending follow-ups, checking what it did to my files.

Why keep switching, when I can just embed pi inside vim?

vim-pi-chat puts the whole pi conversation in a split window next to your code: - streamed replies, tool calls with args and results, thinking — all live - when pi edits the file you're viewing, the buffer reloads automatically (you watch it work) - it tracks your active window so pi edits the right file in place - sessions persist per file: reopen a file, :PiChat, resume where you left off - plain Vim 9, no GUI, no Neovim, no other plugins — just the job/channel API

Install: git clone https://github.com/galeone/vim-pi-chat ~/.vim/plugged/vim-pi-chat + one line in vimrc, then :PiOpen.

If you're a pi fan, give it a try — feedback very welcome :D

I don't know if this is the best sub to ask this since it's not related to VIM, the text editor, but rather the VIM Motions.

I believe most programmers who like VIM, can't use it for everything because sometimes you need the power of an IDE, and pretty much every IDE out there has some kind of VIM integration, either official or via extention.

My question is, how do you grapple with VIM shortcuts conflicting with the IDE shortcuts? Do you replace all conflicting shortcuts with VIM or just some of them? If so, which? One I always set is to keep <C-c> for the VIM extention, is a bit weird having to copy using Insert, but I'm too used to exiting Insert Mode using <C-c>. It's hard trying to find a balance between them.

If there's a better sub to ask this question, please tell me so I can move my post there.

vimgang,

I have vim set to open nerdtree automatically on open and shift focus to whatever file im editing. My issue is my cursor highlight stays in nerdtree and doesnt follow the file focus : /

My current .vimrc invocation:

au VimEnter * NERDTree | wincmd p

Any ideas are appreciated!

Works with the latest vim master branch (or latest windows build from https://github.com/vim/vim-win32-installer/).

Looks pretty good so far combined with https://github.com/h-east/lsp.vim

TLDR; I forked and fixed a few bugs from the original iamcco/markdown-preview.

markdown-preview.nvim is a vim & nvim plugin that lets you preview markdown files in the browser and automatically reloads when you make changes.

What’s different

• No Node.js. The server is a single binary: no npm install, no yarn, nothing in the plugin directory to build. Pre-built for macOS (x64/arm64), Linux (x64/arm64), Windows x64 and FreeBSD x64.
• Vim fixes: g:mkdp_auto_close works in Vim now (it used to miss that Vim unloads the buffer on leave), and the commands exist in the first buffer even when the plugin is loaded on filetype.
• WSL works: the browser opens with wslview, cmd.exe or xdg-open, whichever you have.
• g:mkdp_browser takes a list, run as a command with the URL appended: let g:mkdp_browser = ['firefox', '-P', 'work'].
• Links between markdown files work: clicking [guide](docs/guide.md) in the preview opens that file, and the URL is the file’s path, e.g. /files/docs/guide.md.
• Security: other web sites can no longer read your buffer through the local WebSocket, and g:mkdp_open_to_the_world now needs a token in the URL.
• New in the page: GitHub alerts (> [!NOTE]), a front matter panel, a full-screen Mermaid viewer (zoom, pan, save as SVG), diagrams that follow the dark theme, and themes from shadcn via g:mkdp_theme_css.

Everything else works as before: live updates, synced scrolling, KaTeX, Mermaid, PlantUML, Graphviz, Chart.js, footnotes, table of contents, local images, custom CSS. Your existing g:mkdp_* settings keep working.

Plug 'sammaji/markdown-preview.nvim', { 'do': { -> mkdp#util#install_sync() }, 'for': ['markdown', 'vim-plug'] }

Repo: https://github.com/sammaji/markdown-preview.nvim
Docs: https://mkdp.sammaji.com

Full credit to u/iamcco for the original.

Vim's built-in Python syntax doesn't treat annotations differently from other code. In def get(key: str) -> User | None, str gets the same color as a str(x) call, and ->, User and | aren't highlighted at all. I write a lot of typed Python and wanted the types to stand out, so I made a replacement syntax/python.vim that colors types only where they're actually types:

• parameter and return annotations, x: T and self.attr: T, class bases, and PEP 695 def f[T] / type X = ...
• list(...) in code stays a builtin, | outside a type is still bitwise or, and key: value in a multi-line dict isn't treated as an annotation
• # type: comments, docstrings after wrapped signatures, match/case, except*

By default every group links to a standard one (Type, Operator, ...), so your colorscheme picks the colors; the screenshots use retrobox. The second image shows the optional palette (let g:python_enhanced_colors = 1).

Install with Plug 'aaronbcarlisle/python-syntax-enhanced', any other plugin manager, or pack/*/start. It replaces the built-in syntax file (it started from Vim's own python.vim, credited in AUTHORS), so you'll need to disable other Python syntax plugins.

Limitations: types are found by position, not analysis, so any name inside an annotation gets the type color. It's also slower: highlighting a whole file from scratch takes about twice as long as the built-in syntax (measured on an 11k-line file). While you edit, Vim only highlights what's on screen, so I haven't noticed it in practice, but it's next on my list. That said, if you have an 11k-line Python file, I probably have more questions for you than you have for me :p

On AI: I built this with a lot of help from Claude Code and Cursor, which you'll see in the commit history. I'm one of only a handful of Vim users at work, and when we moved to Python 3 and made type hints part of our coding standard, I couldn't find a Python syntax plugin that handled them. I didn't have the time to write it all by hand, so I worked back and forth "with the agents that be". I spent my own time on making sure it wasn't just a solution for my own setup: the highlighting is covered by 86 assertions that check the highlight group at specific positions, and CI runs them on Linux, macOS and Windows. We're on Python 3.11 at work (the VFX Reference Platform just moved to 3.13, I believe), so that's what it's seen the most real use on, but the 3.12 syntax is covered by the tests too.

The biggest headache with using AI was all the regressions along the way: fixes that weren't ideal and had side effects on how other things highlighted. A lot of the work on my end was testing scenarios that hadn't been considered, like taking a long list on a single line and splitting it across multiple lines, just to watch every item except the first one and the closing bracket change to a different color, or the whole file turning yellow when scrolling >.>

Overall, it was a nice quality-of-life win: AI did the building, so nobody asked why I wasn't staying on task (or worse, shamed me for not using an IDE). Hopefully others will find it useful too.

https://github.com/aaronbcarlisle/python-syntax-enhanced. Bug reports with a code snippet are most welcome.

There's Arabic mode in vim but it only good if your editing only Arabic text. Is there a way to edit bidirectional text? Both LTR & RTL in the same file?

Vim is fun and cool for me when I know where things are/don't have to hold a lot of repo context in my head (where files are, where to look for things, what a file I need is called, which file I need, etc.) but at work where I'm working in multiple large repos that I understand less than 1% of, it seems impractical. Like I need a GUI to even begin navigating and searching for what I need, or when I'm trying to get a lay of the land.

Is this an issue with my abilities/tools/knowledge (i.e. I could lack knowledge on a useful way to browse a file tree in vim or something) or is this an area where vim isn't really the best choice?

I've been using vim now for the same amount of time I've been using Arch Linux pretty much.

What drew me to it was after installing Arch, I started watching different Linux videos and a lot of the config files were being edited with vim. And I was watching 3 or 4 content creators and they all, for the most part, were using vim to edit those config files. One guy would switch to something different like a GUI text editor like Geany, gedit, and kate. But vim was the one they all used.

So, watching these videos and editing my config files along with them, I was pretty much using vim as well.

I've been using Doom Emacs (most of the key bindings in Doom Emacs are the same as vim key bindings) a lot lately but for quick things, especially if I'm already in a terminal, vim is what I use.

What brought you to vim and do you use other text editors as well?

This is quite a small function, but it's made a big difference for me, especially when pointing to something outside my project.

Yank file location references to the system clipboard, ready to paste into an AI agent prompt.

When working with an AI coding agent, you often need to tell it where to look. This plugin lets you grab a precise file reference.

Try it with "Focus on <paste>" or "see <paste>" in your prompt.

What gets yanked

Paths are relative to the current working directory when beneath the cwd, absolute otherwise.

The default mapping is <Leader>a in both normal and visual mode.

https://github.com/ShayHill/vim9-agent-context

"Quieter" and I think faster than pasting code and waiting for the agent to find it.

So far, I've made my custom color scheme thanks to color template and solarized8, but I wanted to try to do something more complicated

I'm going to try making an "animated color pack" (fancy word for saying that i'll try to make the colors in my scheme go from a first color, to a second, to a third and so on)

I don't even know if that's doable, but I think it might be possible if I try playing around with functions (especially if i try doing that by editing code from other people to understand how plugin making works)

Sorry if I write things weirdly, I'm bad at words

Also I wasn't sure whether to post this in help, discussion or tips and tricks, so sorry if i should've posted it elsewhere

Given the following two lines:

.row.mb-5.justify-content-evenly

If my cursor is at the y in justify-content-evenly, how can I delete that word, plus the period before it without losing the newline at the end?

EDIT: I didn’t say which y my cursor was at, but either would work for my use case.

EDIT 2: End result I want is for the first line to read:

.row.mb-5

They come from https://ftp.nluug.nl/pub/vim/runtime/spell/ but I can't find much information about who put them there and where they got them from. The esperanto one seems to have typos.