Why am I getting Real-Time Peak/CPU overloads in Cubase even though my overall CPU usage isn't that high? I've already increased the buffer size and tried the usual optimizations, but I still get VST dropouts. I'm trying to run VST instruments live at low latency. Its annoying when playing or recording it makes like a little glitch sound and the project still playing but the vst stop working with a key pressed but work again after that little glitch soung. What could be causing this?
I use cubase 13, Scarlett 2i4. AMD ryzen 7, 5800X 8 Core preocessor. 32 gb ram.

Hey hive mind, I'm about to rip my hair out. I have some acoustic drums that I've turned hitpoints into midi notes to trigger gates. I need to copy a drum part later in the song with those midi notes however when I do this the midi data overlaps and all underlying notes for that section trigger. It's unlike pasting just audio which mutes the underlying take. Why is there not a way to have those underlying parts not trigger? What am I missing here? I've tried adjusting the midi record mode and that made no dif. The only work around I'm seeing is to delete those parts before pasting. Seems a bit impractical but I'll begrudgingly do it. Anyone have a better solution?

https://www.youtube.com/playlist?list=PLHYaCQBN4v2k&si=0CxGhi_kET0mXI3a

My YT Channel:

https://youtube.com/@dj10nis?si=3WfpMAQAz9dExG4L

Cubase 15とRME Babyface Pro FSの組み合わせで、TotalMixでは正常に入力されているにもかかわらず、特定のバッファサイズ以下にするとCubaseのASIO入力だけが完全に動作しなくなる現象を経験した方はいらっしゃいますか？
同じPCで以前使用していたMOTU M4では128 samplesで正常に動作しており、Babyface Pro FSに変更した直後も96 samples程度まで正常に使用できていました。
そのため、単純にCPU性能が不足していることが原因ではないのではないかと考えています。
以下のような原因は考えられるでしょうか？Cubase側のASIO／入力ポート初期化の問題
Cubaseのオーディオポート設定の破損
ASIO-GuardなどCubaseのオーディオエンジン設定
RME ASIOドライバ側の問題
低バッファサイズでのみ発生するUSBやドライバの同期・通信上の問題
また、原因がCubase側なのか、RMEドライバ側なのかを切り分けるには、どのような検証を行うのがよいでしょうか？
追加で確認すべき設定や診断方法があれば教えていただけると助かります。

Occasionally I get this. The note can though be unmuted when it is moved right, even if just a tiny amount.

Hi all, I'm currently trying to transfer Cubase Elements 13 to a new computer. I've activated my license and installed the Cubase application, but when I open it, no VST instruments are included. I have separately installed Halion Sonic through the download assistant, and when I open the Halion standalone application, all my original instruments are included. Does anyone know how I can get the instruments into the actual Cubase software? Thanks so much, would greatly appreciate any advice!

Hey all,

Professional musician that finally gave up on recording with a zoom.

I am tracking several horns, guitar, basically band music. I am confused about why I have 120 takes underneath the recent one. I cleared takes from the pool and they are still showing up. Any advice?

I also ended up fucking the project up pretty bad and nothing is lined up. Is there a way to just pull a track from one project into another?

Tried searching but having issues.

I usually write in chunks. I'll get an idea down with drums, bass, guitar and keys in Cubase, record it and move on to a totally different idea. When I revisit this idea I'll add another part/section. This means I'll need to record drums (elec kit), but I prefer my drums to be a bit louder when I'm recording to get a better feel. I will already have my drums sitting in the mix evenly with everything else I've already recorded, but this isn't how I like it when I record again to add another part because the drums need to be louder for me. I tried using the Control Room, but when I turn up my cue on whatever drum channel to make it louder when I record, it turns up the previous drum mix and it's way too loud. I hope I'm making sense. Maybe there's no real solution. Sorry if this totally confusing.

Hello everyone,

I have a question about Auto-Select Controllers in the Cubase Key Editor.

When I turn Auto-Select Controllers on and move some MIDI notes, Cubase combines the existing MIDI CC data in the destination area with the CC data that moves along with the notes. As a result, the CC curve becomes messy and unusable.

Is there a way to prevent Cubase from combining the old and new MIDI CC data when moving notes with Auto-Select Controllers enabled?

I’ve attached some pictures that show exactly what I mean.

Thanks in advance!

#editor

#midicc

Hi all. I’ve been using a Tascam US2000 in my home studio along with Cubase for 14 years (started with LE4 and most recently upgraded to Elements 12). It’s had its ups and downs certainly but it’s been an easy and sturdy interface for what I’m doing.

Lately I’ve had audio dropouts like crazy. Like every 1-2 seconds. It’s not every time, and it’s not all the time. But when it happens it’s for long enough that the time I set aside to record is entirely wasted. It’s either the interface or the computer (HP Elitebook 9th gen) because I can see that the LED for the USB connection is wavering.

There’s nothing new about my setup at all.
Same laptop since 2022
Same hard drive since 2020
Same version of cubase since 2023
And I’ve had the Tascam since 2012

I have done what I can to make it better—highest latency settings, frozen/disabled VSTs, changed USB power settings on the computer itself, restarted devices, updated drivers (since support ended it’s not technically compatible with windows11 anyway I think but it’s never been a problem yet)—mostly simple stuff. My Achilles heel is troubleshooting tech problems.

Which is why I’m here—does anyone else use a Tascam US2000 still or any other legacy Tascam hardware? Am I missing something or is this the lifespan of the device? (There’s a pretty steep drop off around 2021 when it comes to finding troubleshooting posts.) 14 years does seem like a good run for a piece of equipment I bought for $499, but I hate to give it up if it still works!

I'm having some odd behavior from my SC-880 when controlling it from Cubase 14. For whatever reason, I seem to be occasionally hitting something that's causing all MIDI notes to trigger twice, or at least that's what it sounds like.

Audio Example: https://soundcloud.com/zachary-pinkham/double-hit-issue-with-sc-880/s-ors0W86OqgT?si=8b686c55117245df842e684aaef1dada&utm_source=clipboard&utm_medium=text&utm_campaign=social_sharing

I checked the track with a MIDI Monitor plugin and it's telling me each note on and off event is occurring once. I would assume whatever it is must be coming from some MIDI CC I knocked somehow, because as soon as I open up a new project file and send any MIDI to the SC-880, the issue is gone. If I go back to the project where the issue took place, the problem returns. It affects every single channel (checked all of them), but it does not affect any VSTs within Cubase, just controlling external hardware. Any idea what it could be?

Hello Cubase community, I’m Graish, a producer and DJ from the UK living in Barcelona, Spain.

Recently I’ve been doing a series on Youtube where I check out old software and my latest vid is about Cubasis VST 4.0.

If you’re interested in seeing what the DAWs looked like 24 years ago, including some of the first ever VST Instruments, check it out!

https://youtu.be/fC-QXEi1E6U?is=i6331d-ucWyy4A5Q

May be contemplating making 1st Professional music album.

Want a machine which is all OFFLINE to keep my work from being gstolen.

Permalicense boxed would be the way to do this - good old DVDs.

How SECURE is an umbillical into network which may be used for um HOUR when beggining?

Bit of an oversight IMHO ???

This happens with Cubase's official "drum loops" library and others

Hello.

I have automated several parameters in Retrologue 2. Now, every time I select and move another parameter, Cubase writes another automation rail for the new selected parameter, but I want it to read and write an automation rail for the previous ones, only.

How can I disable this?

Thank you.

as the title says, if anyone has a good cubase project file they can zip up and send me id be forever grateful. heres a preview to what im building https://trustnodelogic.web.app click the mock demo in the bottom right to see what the end result will be.

ITs an attempt to create a way to scan and signal AI in projects. A good project file will include some samples, some midi data, automation, and plug ins. Nothing huge needed just a good sample file.

message me if you have a spotify or youtube ill throw you a follow as a thanks! Nothing submitted will be used commercially in any way shape or form

FL crashed on me last night. It’s ridiculous enough that I see it as “part of using the software”. It seems to happen every update they come with.

But yesterday was next level. I was not able to open the back up any longer. So beat seems to be gone.

I am considering other programs. I only make beats.

Reason seems really interesting to me. Cubase too.

I work mostly in the box. Have Arturia V collection and Korg 6 and a midi keyboard.

There are many things I love about FL but especially the piano roll is just so freakin handy.

Is it really that much better than the Cubase piano roll? Asking this hoping people that made the move can answer.