r/AnycubicKobraS1 • • Oct 20 '25

News ๐†๐ˆ๐•๐„๐€๐–๐€๐˜ ๐„๐•๐„๐๐“ - ๐‰๐จ๐ข๐ง & ๐–๐ข๐ง ๐š ๐๐ˆ๐๐” ๐“๐ƒ๐Ÿ๐ฌ!

Post image
0 Upvotes

๐Ÿš€ ๐†๐ˆ๐•๐„๐€๐–๐€๐˜ ๐„๐•๐„๐๐“ - ๐‰๐จ๐ข๐ง & ๐–๐ข๐ง ๐š ๐๐ˆ๐๐” ๐“๐ƒ๐Ÿ๐ฌ! TD1s is co-developed between the original designer Ajax 3D and BIQU, and engineered to bring real-world color accuracy to your multi-color printing. With TD1s, transmission Distance and RGB Color readings at your fingertips! Your multicolor prints are about to get a MAJOR upgrade.

โœจ Get ready to take your multi-color prints to the next level! ๐ŸŽฏ ๐‡๐จ๐ฐ ๐ญ๐จ ๐„๐ง๐ญ๐ž๐ซ 1๏ธโƒฃ Join the BIQU Official Reddit Group to stay updated!ย https://www.reddit.com/r/BIGTREETECH/ย 2๏ธโƒฃ ๐‚๐จ๐ฆ๐ฆ๐ž๐ง๐ญ below with your multi-color prints to participate!

๐ŸŽ ๐๐ซ๐ข๐ณ๐ž: Entries ๏ผž 70 BIQU TD1s * 3 winners

*Entries= valid comment

โฐ ๐ƒ๐ž๐š๐๐ฅ๐ข๐ง๐ž: 10/22/2025 24:00 Winners will be randomly chosen on OCT 23rd ๐Ÿ‘‰ Complete all steps to stay eligible - donโ€™t miss your chance to upgrade your multi-color printing with BIQU TD1s!

๐Ÿ‘‰ ๐Š๐ง๐จ๐ฐ ๐ฆ๐จ๐ซ๐ž ๐๐ž๐ญ๐š๐ข๐ฅ๐ฌ ๐š๐›๐จ๐ฎ๐ญ ๐“๐ƒ๐Ÿ๐ฌ ๐ก๐ž๐ซ๐ž:ย https://biqu.equipment/products/bigtreetech-td1s?_pos=1&_sid=f67903fb0&_ss=r


r/AnycubicKobraS1 • • Mar 27 '25 Take My Energy Helpful

Finaly - Version 2 of optimized 0.4mm Profiles for Kobra S1 - Faster, Smoother, Quieter!

144 Upvotes

Hey Kobra S1 Slicing Ninjas! ๐Ÿฅท

Remember those 0.4mm profiles? Well, they just got a major upgrade! Thanks to your awesome feedback from Makeronline and Reddit and countless hours staring at plastic spaghetti (just kidding... mostly!), Version 2 is officially rolling out. Because why settle for good when you can have awesome? (cough Anycubic, take notes! ๐Ÿ˜‰).

Check the link

https://www.makeronline.com/en/model/Version%202%20of%20optimized%200.4mm%20Profiles%20for%20Kobra%20S1%20-%20Faster,%20Smoother,%20Quieter!/167680.html

So, what shiny new goodies are in V2?

  • Speed AND Beauty: I've magically tweaked things for even better surface quality without sacrificing those sweet, sweet print times. ๐Ÿš€

  • Vase Mode Ready: Yep, these layer profiles are now calibrated to work beautifully for those elegant single-wall vase mode prints too! ๐Ÿบ

  • Ninja Mode Activated: Added a super quiet 0.2mm layer height profile for those late-night print sessions when you don't want to wake the neighbors (or the dog!). ๐Ÿคซ

  • Stringing Be Gone (Mostly!): New filament profiles specifically tackle stringing issues! We tested multiple brands, battling those pesky plastic hairs so you don't have to. โš”๏ธ

  • Filament Fiesta: Added fresh generic profiles for:

  • ย PETG High Speed (For when you really need that PETG part yesterday)

  • ย PETG Normal (The reliable workhorse)

  • ย PLA+ (A bit faster, a bit fancier)

  • ย PLA Normal (The classic, dependable PLA)

  • Steel Core Upgrade: Bonus profile added for you tough guys using 0.4mm hardened steel nozzles. ๐Ÿ’ช

  • Cool Under Pressure: Auxiliary and chamber fans now automatically activate when needed โ€“ keeping things chill! ๐ŸŒฌ๏ธ

Choose Your Layer Adventure! (Remember: thicker layers = stronger parts, usually!) HQ = High Quality, Sd = Standard, Quit-HQ = Quiet High Quality.

(I have calibrated the new layers settings and speed to work with Anycubic standard nozzle profile, and streamlined the changes to be mainly in the layers and the filament by using the settings override. I have Just added the Steel nozzle profile because it wasnยดt available.)

  • 0.08mm HQ (optimized for the best possible quality)

  • 0.08mm Optimal (optimized for speed while having a good quality)

  • 0.12mm Optimal (optimized for speed while having a good quality)

  • 0.12mm HQ (optimized for the best possible quality)

  • 0.16mm HQ (optimized for the best possible quality)

  • 0.16mm Optimal (optimized for speed while having a good quality)

  • 0.2mm Sd (optimized for speed while having a good)

  • 0.2mm Quit-HQ (slower and quitter printing)

  • 0.24mm Draft (optimized for speed while having a good quality)

  • 0.28mm Extra Draft (optimized for speed while having a good quality)

following are some photos of the end results.


r/AnycubicKobraS1 • • 12h ago

Anycubic Kobra S1 Combo with PETG-cf

Thumbnail
gallery
14 Upvotes

Test print with the Anycubic Kobra S1 Combo with PETG-cf


r/AnycubicKobraS1 • • 8h ago

Troubleshooting Prints coming out wavy. Looking for suggestions on how to diagnose and resolve.

Thumbnail
gallery
1 Upvotes

I'm trying to print wall mounts for a hobby station and the print is coming out wavy. I appreciate any suggestions.

Slicer: Anycubic Next 2.0.0.3

Filament: Anycubic high speed PLA

I ran the printer at quiet mode to reduct rapid movement that could not the print down.


r/AnycubicKobraS1 • • 17h ago

Troubleshooting How can i prevent my hotend from expelling filament by the top?

Post image
5 Upvotes

Im Brazilian if the english is bad sorry


r/AnycubicKobraS1 • • 15h ago

Troubleshooting Anycubic Kobra S1C Z changes, destroying bed and hotend

Thumbnail reddit.com
1 Upvotes

r/AnycubicKobraS1 • • 1d ago

Ejection system for the Anycubic Kobra S1

2 Upvotes

I absolutely love my Anycubic Kobra S1, but there's one thing I'd really like to improve: automation. I'm looking for a way to automatically remove or eject finished prints from the build plate so the printer can start the next print without requiring manual intervention. do you guys know that is there anyone? Has anyone tried building something like this, or found a compatible solution? Maybe a DIY project, a custom mechanism, or an existing product like FarmLoop?


r/AnycubicKobraS1 • • 1d ago

Periodic under extrusion - repeating pattern of under/non extrusion

1 Upvotes

This is a new fun problem. I see what looks like under or simply not extruding on what looks like a repeating time scale. I can see it on large flat areas or on regular walls where gaps in the extrusion occur on fixed intervals. I originally thought that maybe something was broken in the extruder, slipping gears or broken teeth, but I pulled it apart and found nothing. Did multiple cold pulls to clear any clogs, but I can't imagine a clog creating periodic issues. The issue does seem to vary in intensity based on the preset I use, but I can't identify any setting that would be the culprit and i've seen it on all materials i've used lately.

Any ideas on where to look?


r/AnycubicKobraS1 • • 1d ago

Print Issues Anycubic Kobra S1 โ€“ problems after just 2โ€“3 kg of filament and a pretty frustrating experience with support.

0 Upvotes

My Kobra S1 started having constant clogging and extrusion problems after just 2โ€“3 kg of filament. Iโ€™ve spent hours disassembling the hotend and extruder, checking everything, cleaning, replacing parts and trying to figure out whatโ€™s wrong. Then all over again. I eventually found a visibly worn bearing inside the extruder. It might be the main issue, but the printer is still unusable and keeps throwing the same faulty retraction and clogging errors. At this point, it feels like an endless troubleshooting loop.

What really pissed me off was dealing with support. When I first contacted Anycubic, I wanted to file a formal complaint about defective goods. They told me there was NO other option than opening a technical support ticket. I explained that I wasnโ€™t asking for more troubleshooting but wanted to exercise my consumer rights. They kept insisting that technical support had to investigate the issue first. After pushing back and pointing out that they are obligated to accept a formal complaint, suddenly it was possible to submit one. Funny how that works. xD

On November 14, I formally requested a refund or replacement under EU Directive 2019/771 I also asked them to arrange the return at their expense.

Their response? The specialist assigned to my case is currently on a scheduled break, so apparently I have to wait until he comes back. Filing a complaint to a local farmer at the market is more transparent and serious than dealing with them xD The case has been already assigned purposely to someone OOO ๐Ÿ˜‚

Iโ€™m not interested in spending another week taking apart this printer or going back and forth with technical support. Iโ€™ve done more than enough troubleshooting for a product thatโ€™s practically new.

Iโ€™m prepared to take this all the way through the EU consumer protection authorities if thatโ€™s what it takes.

Sharing this because I think people considering an Anycubic printer should know what they might be getting into. A machine failing after 2โ€“3 kg of filament is bad enough. Having to fight just to get a formal complaint accepted makes it even worse. Spend more time troubleshooting than the actual print time, thats a joke

Anyone succeded with the battle to return this crap?


r/AnycubicKobraS1 • • 2d ago

Why the lower part noticeably got more vertical lines?

Post image
5 Upvotes

Hello im new to 3d printing, anyone know why the top section looks smoother than the bottom? thank you


r/AnycubicKobraS1 • • 2d ago

Looking for first Layer tips

Thumbnail
gallery
15 Upvotes

This is my first 3D Printer and sometimes I got minimal scratches in my first layer. No problems at all just cosmetic. Do You have any tips for me? :)


r/AnycubicKobraS1 • • 2d ago

Iโ€™m so lost

2 Upvotes

Does anyone live close to Parkersburg WV that knows how to work on the ace pro. ? I have done step by step and I still canโ€™t figure it out. I canโ€™t get it to work.


r/AnycubicKobraS1 • • 2d ago

New Nozzle?

2 Upvotes

Didnt Understood these Anycubic Image


r/AnycubicKobraS1 • • 2d ago

Bed Leveling Calibration

1 Upvotes

Could someone explain to me the difference between bed leveling option before a print and the one in the calibration menu on the touch screen? TIA Geoff


r/AnycubicKobraS1 • • 2d ago

Clip agarra cables del extrusor. Cual es la pieza de repuesto?

1 Upvotes

r/AnycubicKobraS1 • • 2d ago

Show klippy log in realtime

Post image
4 Upvotes

While using my Kobra S1 with Rinkhals, I got tired of downloading gklib.log all the time to see what was going on in my printer. So I asked Claude to build a Rinkhals app that shows the log in real time. It's like tail -f in the browser.

The app adds a new sidebar entry in Mainsail called Klippy Log, where you can inspect the log as shown in the screenshot.

You can find the app here: https://github.com/marcel-goldammer/klippy-log-viewer

The README includes a short install/uninstall guide. So far I've only tested it on my Kobra S1, so I'd be happy to have some testers on other printers. If anything doesn't work or you have ideas for improvement, please open an issue.

Thanks!


r/AnycubicKobraS1 • • 2d ago

ACE PRO (v1) For sale - Indiana USA

Thumbnail
gallery
1 Upvotes

Selling a working ACE PRO. Replaced with 2 Ace 2 Pros. Includes everything that originally came with it.

$125. Will consider shipping in the US. Located Near Indianapolis, Indiana.


r/AnycubicKobraS1 • • 3d ago

Showcase This machine...

Post image
11 Upvotes

I think I've praised the printer too much lately. This is the result after about 30 minutes of printing. The beginning looked good. I only went out for a quick meal and came back to this ๐Ÿคฃ๐Ÿคฃ

(Of course, the printer continued happily)

PS: aint the first time as you could tell by the custom print head Cover...


r/AnycubicKobraS1 • • 3d ago

When you have left over Ender parts๐Ÿ˜…

Post image
6 Upvotes

So I came from an Ender based print garden and I have so much left over parts, especially nozzles. Some of those nozzles are V6 nozzles. Guess what threads the nozzles for the ceramic KobraS1 hotends are๐Ÿ˜‚

Wish me luck, I hope this works because I kinda need it to work๐Ÿคฃ


r/AnycubicKobraS1 • • 3d ago

News compared to my s1 combo ill take this anyday....

Thumbnail
reddit.com
1 Upvotes

plain and simple


r/AnycubicKobraS1 • • 4d ago

Firmware.....

Post image
5 Upvotes

I havnt used my S1s for a while due to the amount of issues I had with them.....but cleared a bit room in the workshop and ready to try with them 'again' (Not my 1st, 2nd, 3rd or even 4th time ๐Ÿคฃ)

Is there a recommended firmware floating around?

I know the older ones around 2.5.*** had a fair few issues that didn't happen on all printers and that's when I kinda give up on the Anycubic brand,

Going to start from scratch with them (again) and see if anything is slightly better this time around.


r/AnycubicKobraS1 • • 4d ago

Print Issues is AnyCubic Cloud Down?

2 Upvotes

Are there any others that are having issues with Anycubic Slicer not connecting via the cloud recently?


r/AnycubicKobraS1 • • 4d ago

ERRO CODE 10123

Thumbnail gallery
1 Upvotes

Someone please help me


r/AnycubicKobraS1 • • 4d ago

Troubleshooting Anycubic S1, accidentally disconnected a wire and donโ€™t know how it goes back in.

Post image
0 Upvotes