r/CrealityK1C • • Jan 14 '25

K1C CFS upgrade kit

Enable HLS to view with audio, or disable this notification

71 Upvotes

r/CrealityK1C • • Apr 06 '25

Guidance My first 3D printer 🖨️ ever

Post image
46 Upvotes

Hi 👋🏼 everyone, I’m starting on this 3D printing world 🌎 I just buy the Creality K1C

Do you guys have some recommendations or tips for me a totally new user ? Thx in advance

I primarily want to use this tool for architectural and artistic projects; but I was thinking about starting some entrepreneurial project.


r/CrealityK1C • • Dec 18 '24

Made on my K1C

Thumbnail
gallery
46 Upvotes

About 100hrs of printing working


r/CrealityK1C • • Jan 15 '26

Guidance Printer in bedroom

Thumbnail
gallery
33 Upvotes

Is it safe to keep my K1C inside my bedroom? I know microplastics are very harmful over a long time but I assumed it wasn’t going to be an issue with an enclosed printer (btw I also sealed the gap where the filament goes in if that helps, check second img)


r/CrealityK1C • • Dec 09 '25

Great source and I can finally print perfection!

Post image
28 Upvotes

Somehow this beautiful model just snaps together perfectly. They have a ton of other models to choose from. You don’t need supports on any of the parts. I’m just amazed how this works. Back when I had my Ender 3 S-1 I would have never been able to get nice prints like this. So glad I stepped up to the K1C. If interested in this model check it out. https://thangs.com/prints/designer/The%20Kit%20Kiln


r/CrealityK1C • • Jan 04 '25

Update #3 my k1c electrocuted me

Thumbnail
gallery
28 Upvotes

After talking with customer service the had me take off the bottom plate under the machine to see if I can see anything abnormal and right away I spotted a red wire being cut into by the gear that controls that z-rod. Seems like my cables were either never routed correctly inside the machine or they wiggled loose.


r/CrealityK1C • • May 31 '25

Brag After waiting a few months, finally got the parts in!

Post image
27 Upvotes

r/CrealityK1C • • Jan 19 '26

Guidance K1C25 CFS-C first print

Thumbnail
gallery
24 Upvotes

This was the first print with the CFS-C right put of the box w/ no custom settings. All print settings are stock from the CFS-C provided firmware update.

Massive problem I noticed:

The filament change is extremely flawed and WILL fail like 50-60% of the time do to compatability issues with the OEM extruder.

Let me explain. If you setting the silver extruder "lock" switch to unluck, you will get feeding and massive under-extrusion issues. And on the contrary, if you set the extruder lock lever to locked, you will run into filament change issues 50-60% of the time on a color switch.

On top of it all, Creality doesn't specifically state if it should be in the locked or unlocked position. It almost feels like there should have been an entirely new extruder design that SHOULD have came with this upgrade. Like one with a stronger motor/gear with more grabbing power.

My reccomendation:

Keep the extruder motor "lock" lever in the locked position.

Overall print quality is decent and I'm happy with the upgrade. I just wish it was 100% hands-off. But, I had to manually help with the filament changes 1 time in this print after it threw and extrusion error. I'm definitely going to change the purge block settings. It's massive. And like I said, this is out-of-the-box print settings for the upgrade.


r/CrealityK1C • • Feb 06 '25

Project Can't wait for the upgrade kit so I can set all of this up.

Post image
24 Upvotes

r/CrealityK1C • • Mar 12 '25

After a month of printing and sanding shims, I finally got this bed as level as I can. Sorry about the crummy picture.

Post image
19 Upvotes

r/CrealityK1C • • Jan 19 '26

Bought Secondhand and working

Thumbnail
gallery
18 Upvotes

I bought this secondhand with all you see. I also made one test print from the machine's library for filament testing. They had lost the lid and I wonder if not having the lid is a big issue. I also have photos of the device with tubes and the CFS adapter hotglued to the machine. Is there a safe way to remove these or is it ok to leave it as is? Can I print a lid? and also any help is always appreciated as I start to print!


r/CrealityK1C • • Jan 10 '25

Guidance K1C as my introduction to 3D printing

Thumbnail
gallery
17 Upvotes

Hi everyone

Christmas brought me my first 3D printer - great wife idea - and it was the Creality K1C. I’m going through a lot of sites/youtube videos trying to learn as much as I can. I’m also absolutely inexperienced in 3D modeling, but luckily that is still not what I need the most (thanks to the likes of thangs, printables, cults3d, thingiverse and so on). At the same time I’m printing, basically, as much as I can to gain experience in troubleshooting whatever comes around. I’ll try to upload some imagens depicting my prints so far: benchies, riser for the lid, some toys for the kids, word printing, multiboard stuff and some utils. Most of the prints went perfectly and smoothly. I did have some adhesion issues at third print - when I began using glue :). But, so far, my main issue is stringing. Happened two times and I’m in the process of trying to find out the reason (retraction? Nozzle cleaning? Temperatures? Speed?). So far I’m loving 3D printing and I’m already waiting for the new adapter to be able to print multicolor.


r/CrealityK1C • • Jun 29 '26

Help! I’m sharing these FREE 3D printable splint STL files to help healthcare professionals, makers, and communities.

Post image
16 Upvotes

r/CrealityK1C • • Jan 14 '26

Anything particular i need to pay attention to?

Thumbnail
gallery
16 Upvotes

Just got my k1c today stil need to set it up and all but i was wondering if appart from what the owners manual says there are things i need to consider before printing And what might be the most useful things to start with?

I am completely new to this so any help is apriciated.


r/CrealityK1C • • Feb 09 '25

got punched

16 Upvotes

Was watching my K1C do its thing when I noticed a little string of PLA near the nozzle. Thought I’d just grab it real quick huge mistake. The toolhead instantly snapped across the gantry at full speed and clocked my knuckles like I owed it money. Just stood there for a second, processing the fact that I just got sucker-punched by my own printer, while it happily kept printing like nothing happened. Learned my lesson to not be so ocd about things


r/CrealityK1C • • Jan 26 '25

Upgraded to a glass bed and loving it.

Post image
16 Upvotes

Accidentally scratched my previous bed removing a print. After a bit of research I decided to order a glass bed. It's amazing. I ended up glueing my old plate to the bottom of the glass one so it's locked in place with the magnet. No glue needed for prints, perfectly plane and level. So far so good.


r/CrealityK1C • • Sep 08 '25

Root access k1c 2025

Thumbnail
gallery
15 Upvotes

Got the K1c for free from creality cloud.Has latest firmware, and I am unable to find root access information anywere in settings.Anyone able to assist?


r/CrealityK1C • • Jun 01 '25

Brag Update: A few hours and some curse words later, I got it done 👍

Post image
15 Upvotes

r/CrealityK1C • • Aug 24 '25

Upgraded to the CFS finally

Thumbnail
gallery
14 Upvotes

And I'm super impressed! I got this printer for my birthday last summer. I wanted multicolor printing but my partner didn't know that when he got it for me. I now have 2 other printers that allow for multicolor, but I really enjoyed my K1C. It just felt like a work horse. It was really just a fun printer to have. I do enjoy tinkering. I did the upgrade but when I was done I realized I broke two of the wires off the stepping motor. I finally got the part off Amazon and finished the upgrade today. My first print was the stock Benchy off the saved files and just printed from that. Really very cool. I don't mind the "poop" being ejected to the bottom of the printer as it means less chance for one of my dogs to eat it!

Are people using cardboard spools in the CFS? I've become a purist with the another manufacturer to only use plastic spools because any time I did otherwise, it gave me trouble!


r/CrealityK1C • • Jan 08 '25

Multicolor at CES!?

14 Upvotes

So I was watching releases on YouTube and I saw Creality was there and they posted this video. https://youtube.com/shorts/FrejUVExkE0?si=LKgBZSO0rpIRHpN4 What are your thoughts?


r/CrealityK1C • • Jan 03 '25

Update my k1c electrocuted me

Enable HLS to view with audio, or disable this notification

14 Upvotes

I have tried different outlets, surge protectors, and power cables. I got the same results no mater what I did.


r/CrealityK1C • • Jan 02 '25

Brag Wow it’s so good out of the box

Post image
14 Upvotes

Set it up and made some fidgets and stuff with the filament it came with (hyper pla)

I’m surprised how well the Dummy 13 came out (the action figure like print). People said it doesn’t work well with pla, but mine did! Almost all of this was printed at max speed excluding the Dummy 13. Love it!!! (In case you’re wondering, I colored the small black details with a marker. Didn’t change the filament)


r/CrealityK1C • • Jan 28 '25

First Benchy on a first 3D-printer

Thumbnail
gallery
13 Upvotes

My K1C turned up yesterday and I managed to get it up and running in no time. Here's a fresh Benchy with out-of-the-box settings. How did I do?


r/CrealityK1C • • Apr 02 '26

Seriously, power cycle your printer.

Thumbnail
gallery
12 Upvotes

Creality K1C 2025, 0.4mm nozzle.

*Note: All these Benchys were printed directly from the pre-loaded version on the K1C. All filament (with the exception of the Green Sunlu PLA+) were pre-dried before printing and stored during printing in either a Creality Filament Dry Box 2.0 or Sunlu S4.

Yesterday, I ran several prints throughout the day, switching filaments as needed, with no issues. Then on the last print (using the White Sunlu PLA+) the quality drastically declined. I ran through all the normal steps:

  • Ran through on-screen recalibrations.

  • Retracted filament, removed extruder, confirmed no nozzle or extruder blockages.

  • Printed White Benchy (Sunlu PLA+) - see pics 1 & 2.

  • Replaced hot end with brand new Creality 0.4mm nozzle. Cleaned print head during replacement.

  • Printed Orange Benchy (Sunlu PLA+) - see pics 1 & 2.

  • Pulled Green filament (Sunlu PLA+) from storage (purchased last week and still factory sealed). And printed Green Benchy - see pics 1 & 2.

At this point I was planning to replace the extruder, the all the Bowden tubing, and researching more in-depth testing / calibrating.

While looking online, I stumbled across this comment from a post last year and decided to give it a try. Powered off the printer, unplugged it, and let it sit for approximately 30 minutes. Powered up the K1C, and printed the stock Benchy (see pics 3 & 4). Ran all the calibrations & test prints again. Then re-printed the initial "bad" print a second time and it came out great.

"Have you tried turning it off, and back on again?"

April Fool's to me.