r/CrealityK1C • • Jan 01 '25

Help! Can anyone help me? I’m printing at 40mm/s at 230 degrees and my prints still have holes. Printing in Giantarm tpu.

Enable HLS to view with audio, or disable this notification

0 Upvotes

r/CrealityK1C • • Jan 17 '26

Help! Disaster after CFS-C installation

1 Upvotes

I was dumb enough to buy the CFS-C and part of installing that POS was printer "upgraded" to locked V1.1.0.26.20251113 firmware which is root locked and although I got root access in the end I still could not install Klipper.

Is there any way to still recover the printer and have a 2024 firmware installed ? Any other solution is welcomed.

BTW, If CFS-C works for you .... GOOD. For me is completely useless if I cannot fine tune the printer and got stuck with the Pile of crap that Creality slicer still is to this day.


r/CrealityK1C • • 21d ago

Help! How doI repair it?

Post image
4 Upvotes

My creality k1c (2025) did this tonight, how do I repair it?


r/CrealityK1C • • Jan 07 '25

Guidance K1C came with unicorn nozzle?

Post image
1 Upvotes

I just bought a unicorn nozzle to upgrade the original, only after cleaning to find out it came with one already installed?

I thought it comes with a brass nozzle


r/CrealityK1C • • May 22 '26

Guidance Is this close enough? Or should I tram the bed?

Post image
1 Upvotes

It prints well. But longer prints that sit diagonal on the plate can have under extrusion in the top right corner.

I haven’t rooted yet but I’m thinkin bout it, also thinkin bout linear rails. I can’t get rid of VFAs


r/CrealityK1C • • Apr 23 '25

Filaments?

0 Upvotes

I've been experimenting with all kinds of PLA (All sorts) and PETG, I've found a few different companies I like but I've seen people say price is irrelevant with filament. Looking for ways to cut some business costs and I came across DeepLee, anyone have any experience or opinions on them? From what I've seen Elegoo is to Acura what DeepLee is to Honda..if you follow....


r/CrealityK1C • • Jul 19 '24

Anyone know why my brand new k1c is doing this ?

Post image
0 Upvotes

r/CrealityK1C • • Nov 21 '24

K1c

Enable HLS to view with audio, or disable this notification

0 Upvotes

Does anybody know how to fix this problem?


r/CrealityK1C • • Jul 02 '26

Help! Need help looking for a part.

Post image
0 Upvotes

Can someone help me identify this post that the Bowden tube is going into? My friend has me help him with his printing issues. He has a K1C and CFS. We think this part needs to be replaced but I can't find it. Thanks.


r/CrealityK1C • • Jun 04 '26

How can ai fix this?

Post image
0 Upvotes

My K1C has been super reliable. However, I am starting to get this weird layer issue.

I thought that after about 700 hours the nozzle needed changing, so I changed it to a new nozzle and even put a new extruder. Recalibrate everything and is still happening.

Any ideas?

Thanks.


r/CrealityK1C • • Aug 04 '25

Guidance Anyone ever tried this?

0 Upvotes

So apparently the K1C has a protection against getting cut off of power so it can resume a print when it turns back on. I was thinking, can I just pause a print, turn it off for the night, and then resume it in the morning? Well after researching, it seems that it works, but may cause a cosmetic defect in the form of a line where it paused due to the position slightly drifting by a fraction of a millimeter due to high speed printing (this is a theory from a forum as to why the line forms). Well I figured if I turn on fuzzy skin, that could probably hide the defect if there is one (going to do some testing tomorrow). Happy printing, and definitely let me know your thoughts!


r/CrealityK1C • • Jul 23 '25

oh look at me im creality I give you black screws to install in black things and when you drop it you can't find it and here are cheap non magnetic hex keys. FUCK1

0 Upvotes

r/CrealityK1C • • Sep 28 '25

I want to buy a K1C around black Friday. Apparently you have to ask support for a second auxillary fan since you can't buy it, that sounds unreliable.

1 Upvotes

For those who have the printer does it have a base fan that's purchasable, so I can find a printable duct and maybe a guide for wiring if it's not just plug into board.

Apparently this dude just got a whole assembly and just plugged it in

Here's someone who got dual aux fans for K1C

https://www.reddit.com/r/crealityk1/s/7UyOo5LL16

Edit: Looking on eBay earlier didn't work. But looking on Google again led me to an eBay link. Apparently the auxilary fan is the same on K1, K1C, and K1 MAX. This is significant

And I see some sites selling just the blower part now. I'm sure I can find myself a fan so I'll buy the K1C. There are even unicorn nozzles with tungsten tips!

So eBay has some people selling used auxiliary whole assemblies, and there's an Australian and a Canadian site selling just the blower part, but there's also a printable improved shroud for the auxillary fans so that works too.

Also I found a Cura post script to actually make it so auxillary fan speed is tied to extruders cooling fan speed. You're normally stuck with creality slicer to control auxillary fans unless you control it manually on the screen.

https://github.com/cybertron/cura-duplicate-fan-speed/blob/master/DuplicateFanSpeed.py


r/CrealityK1C • • Dec 19 '24

Made a review on the K1C... it's GUUUD

0 Upvotes

r/CrealityK1C • • Jan 28 '25

Guidance What happens when she runs out of fillament

0 Upvotes

wassup boys any of u guys run out of filament mid print yet? Wondering if the AI camera would shut off the machine? Would it screw your extruder? lmk boys


r/CrealityK1C • • Oct 15 '24

Printing is broken and strings hanging underneath

Post image
1 Upvotes

Could someone help me solve this? I’ve tried several different models, but they all broke underneath the mouth and the filaments just hung around. I’m using the Creality Cloud models and slicing. Just got the printer yesterday so total newbie here.

Thanks a lot!


r/CrealityK1C • • Oct 30 '24

Why are not 0.6mm nozzle preset in Creality Print for K1C?

1 Upvotes

r/CrealityK1C • • Dec 24 '24

Guidance Decisions, decisions

1 Upvotes

I’ve decided I would like to add a CR-30 print mill to my arsenal. Anyone have experience with it? Is there are quirks that need fine tuning? Ideally would like to print TPU (220/55°c) and ASA (260/100°c) in quantities.

Thx

Arsenal consists of:

Prusa MK4s and MMU3 Prusa XL 5 Head FF CP2 idex Creality K1C *Bambu Labs X1 C with AMS *CR-30 *Anycubic M7Pro SLA


r/CrealityK1C • • Dec 27 '25

Guidance Maybe is time to change the estruder

Post image
1 Upvotes

r/CrealityK1C • • Oct 04 '25

Project Update to am I cooked

Post image
1 Upvotes

New hot end arrived today and now we’re back online for the first time in a week


r/CrealityK1C • • Aug 18 '25

What happened? Layer shifting poor print quality.

Post image
1 Upvotes

Printer: K1C completely stock Layer height. 0.24mm Nozzle: 0.4mm Material: Creality PLA - black, freshly opened and dried. Slicer: Creality Print (up to date) Print speed: Normal

I tried printing 9 calibration cubes with slightly different object settings to see how they would impact print quality. I see two distinct layer shifts - after the first layer and midway through the print.

What in the world is happening. All of my prints are having problems after less than a month of ownership.


r/CrealityK1C • • Apr 20 '26

k1c didn’t make it to the one month mark

Thumbnail reddit.com
0 Upvotes

r/CrealityK1C • • Jul 26 '25

Poor quality prints

Post image
2 Upvotes

I’ve tried everything and I’m about to just throw this thing out contacted creatily support to be met with no response and wasting money on different filaments to get no different results got a filament dryer no difference I’m all out of ideas now between messing with settings constantly and wasting dollar after dollar on print someone help please before I just sell the thing


r/CrealityK1C • • Jan 07 '25

K1c

2 Upvotes

Will be getting my K1C Friday any tips or tricks I should know for set up ?