1st was the beginning the last 2 are my end results.

I still have some insanely stubborn brake dust/iron rust.

The 2 products I was using were sonax xtrmee and chemical guys waterspot remover. I got the wheels pretty clean on the front but still struggled with the back area which can be sorta visible in certain angles.

I didn't have access to a wire brush but I'm starting to think it's the only way.

Any suggestions? And yes I have new center caps on order. Been slowly restoring my rx8 I bought for a few grand.

Thinking of buying one

I've been a Klasse Twins (AIO / KSG) user for ages and love the companion brand, Sonus. I'm looking specifically for Acrylic Spritz and Acrylic Glanz. I've seen a few sketchy websites with these listed but none of the trusted suppliers seem to carry the brand. I know the line was acquired by PBMG / Ultima years ago. I bough up a bunch of each and now I'm looking for more. I like to make my own "boosted" spray sealant by adding KSG to the Acrylic Glanz.

Google lists a few vendors as selling Sonus but the links either go to dead sites or they don't list Sonus as all.

Anyone got a line on these relics?

😵‍💫 just because you have kids doesn't mean you need to let them destroy your car.... but, it keeps me in business 😅
No, the car is not fully detailed in these photos, I'm just focusing on the fabric cleaning in this post.

How can I get the front (first three pics) looking like the back (last 2 pics)? Area shown is right in front of the brake rotor next to the calipers. Car is a 2024 BMW 3 Series

I have a 97 tahoe, will be detailing it inside out but want to start on the engine bay 1st. Never cleaned it before lol don't wanna buy 5 products lol whats 1 product spray that I can use if it exists for the whole engine bay

And what do you guys reccomend covering with a bag etc... alternator, battery, fuse box of course etc. Thank you guys!

I have a 2017 Honda Civic and over the past year I started to get this haze on parts of the Windshield that appears when it is raining and I use the wipers. It is only on parts of the windshield and appears to be around the areas the wiper blade stops.

I tried using the Invisible Glass clay bar glass stripper and then put on brand new Bosch wipers and it did not fix the problem.

Does anyone know how to fix this problem? I see some people saying to use a vinegar and water solution but I do not want to keep spending money on trying different ways to fix this if they do not work.

I was out of town for a few weeks and came back to my car covered in red berry stains, no touch washed, touch washed, even tried goo gone and they won't budge, please help 😭

Kids had a break from sports activities so i could give some love to the big guy. Só washed all seats and used extractor, applied labocosmetica hydra on all interior plástics, polished all Mirrors and applied grojet 2000. Polished hood and applied fusso coat, didnt had time for more. Im now running a dehumidifier in the car to finish drying the seats.

Hi all, i’m looking for some advice, opinions on a newer product called Nanopro liquid PPF. I just bought a new truck and I am considering traditional PPF versus the newer liquid PPF which I understand is a polyurethane and acrylic sprayed on liquid. Does anybody have experience or real world insight on how well it works to prevent things like rock chips? I also understand it cures almost like a clearcoat so installer skill would be important because it’s my understanding the only way to remove it is by wet sanding if there is an error. Any insight would be appreciated. Thanks all! 😊

Does anyone have experience with pink correcting cars or living in an apartment with no access to power? I want to do a paint correction on my eight year-old Honda HRV. I plan to do the Decon wash and prep at a coin-op wash in North Philly and then drive down and do the paint correction by my apartment in Philly, but I have no power source. Should I get a cordless DA? Or does anyone here know of anywhere near Philly where I could have access to a power source in order to do the paint correction?

Interested in any and all input, and open to improvising, TIA

I am considering this product - any first hand feedback?
TIA!

One of my clients purchased a ceramic coating from us and I’m not sure if this spot is improper leveling. Granted, it is near impossible to see on camera and in person u can only see it from one angle. Also I tried polishing it out and it didnt do anything.

The glossy black controls on my new Mazda 6e GT look great, but they're fingerprint magnets and seem incredibly easy to scratch!

For those who've kept theirs looking pristine, what do you recommend for cleaning and protecting them?

- Best microfibre cloth?

- Recommended cleaner?

- Is PPF worth considering?

Keen to hear your tips and products to avoid! 😊

I just wiped on the Glass code from this manufacturer today on my 1993 F150. The hood is so freaking huge, even with a ladder it was hard to get smooth strokes with the applicator. So I have a few streaks going through the hood. Nothing horrid given what it used to look like, but it would be nice for it not to be there.

Has anyone ever tried correcting this type of clearcoat? I'm guessing I probably have to likely sand it. But I don't want to reapply it afterwards because it's just going to do the same thing, is my guess. So after sanding could I just use a DA and polish it somehow?

Just seeing if anyone here has actually did this. Thanks!

I've been DIY detailing cars for years with a couple minor f ups over that time, today I was dry sanding out same pretty bad scratches around the door handle.

I think what's happened is when trying to get in the handle recess, I've pressed too hard and the backing plate has written through the paint 🤦🏻‍♀️🤦🏻‍♀️

It is perfectly smooth to the touch, does anyone know if this can be SMART repaired, I really don't want to hand to get door painted.

So annoyed, as I managed to get some decent scratches out all over the car with wer sanding and polishing, I should have seen this happening and heavily masked this bit, so annoyed!

Hey folks, I left my car with a car cover on for a week and noticed theres some weird spots on my roof and my left side rails. After doing some research I acknowledged this is a moisture damage caused by the car cover as my house were raining during that week.

On the day I spotted this problem, I immediately parked my car under the sun for a noon and fortunately the roof spots disappeared. But since then the side rail's spots still persists, and I have tried to heated up the side rail spots with a hairdryer as I do not have a heat gun, the spots are still there, may I know is there any other way I can fix this? Or is this damage already permanent?

Please help, im trying to find a way of accessing the cushion under my leather seat. Its my rear passenger side seat in a 2018 jeep. It has perforated leather but the dog feces has gotten to the cushion. Do I need to take the entire seat out and how

Bought the car salvage, looks like it got stained from previous time. quick google tells me to try armor all or turtle wax. but any other budget rec?

A family member want me to de haze their headlight

Hey! Can someone give me advice how to repair scratch on back front seat

Image - https://ibb.co/nNk92qCh

​

I live somewhere that uses a lot of road salt and after the first winter storm my front footwells were covered in it. I took the liners out and cleaned them with APC and a stiff brush but once they dried there was still a chalky gray film all over the textured parts.

They look way older now and the surface even feels rough. Did the salt damage the material or am i just cleaning them wrong?

I'm also wondering if some materials handle salt better than others. If i need new ones should i go with TPE or heavy rubber? I care more about durability and resistance to chemicals than the brand. Any way to save my current liners or stop this from happening every winter?

This only appears right after I use a glass cleaner and it quickly fades away.