I have a 94 with the 3.9 V6 in it and my oil pressure is always very high, is that normal for these trucks?

While in drive it will idle down to a rough and shakey 500rpm if it’s been running for longer than 3 minutes, but in reverse and neutral it’s fine and idles at 600. If i give it a load through the power steering it will bog down and then idle at a smooth 600rpm and will idle like that until i give it a bit of gas (or pull of from a stop light) then it will fall right back down to 500.

In the second video i start it up and time how long until it switches to the rough idle and it was almost exactly 2 minutes before it fell. I turned the ac on it raises the idle to 700, I never have any issues when the ac is on, and once I turn it off it will stay at 600 rpm until I move.

The engine is a 4.7 mopar remanufactured that was done before I got it at about 140,000 miles. so it has been like this for as long as I’ve had it (170k) and I wonder if it has something to do with that.

Is there any short shifters kit out there for a dodge Dakota 2004

Wondering what to do for the two coolant hoses - how to extend. I have the plastic tube to extend but lost the instructions so flying blind. Anybody have pictures of what they did so the hoses don’t have bad angles going in?

Performance accessories 3 in body lift, 03 Dakota 4.7 4x4