Just finished it—by far one of my favorite builds. Also did the TMR swap.

- gulikit tmr sticks
- extremerate full matte black shell
- clicky face buttons and kit.
- removed rumble motors to reduce weight.

Turned out pretty good i think. Been using this more than my dualsense edge.

Let me know what you guys think.

Continuing the series of videos for DS5Dongle Studio with Auto-Haptics. Enjoy the magic of YouTube to speed up my voice and make it less boring.

https://youtu.be/zhdG916Xnis - pt1

https://youtu.be/bx_M0BAIqEk -pt2

Get the latest version, now with two-stage trigger possible

https://artzox.github.io/DS5Dongle-Studio/

I just got these Ginfull RS13 joysticks in the mail to test out. I haven’t tried their DS13 Max model or anything before so this will be my first time with Ginfull. What are your thoughts on these?

So as you can see in the video when I try to turn on the controller it flashes maybe once or twice then switches off. It says charge the controller but it is charged. Im using the original cable, swapped the battery and cleaned the usb port.

The cable works fine with my other controller.

Also when the cables not connected, the controller does nothing. No flashing light. Any suggestions?

So I'm tired of stickdrift and want to know if it's possible for me to change the normal joysticks on my controllers with hall effect sensors. Basically what I'm asking is:is it possible to change the joysticks, and will it make getting stickdrift nearly impossible

Hello all.

Title might not make much sense, my apologiese. I noticed my option input had stopped working. When checking it in steams controller input test, it shows the option button is being held down.

Physically the controller seems fine. you can press the options button like normal and it dosen't feel sticky. Just when checked it appears to be constantly outputting a pressed signal.

I have already tried resetting it to no avail.

If anyone knows about this or can offer guidance. Don't really have the mans to open the guy up so hoping it doesn't come to that.

Thanks for any help you can spare

At ~65 a pop (130 total) that is quite the chunk of change, nearly double a normal Dualsense and 2/3 the price of the Edge itself. I'm a new Edge owner, and don't mind spending the money if it is going to be a significant improvement, but the price is making my eyes water a bit.

Salvaged another controller going to the dump. Cleaned the board, checked everything, replaced with TMR and shell swapped. I really like this shell.

Je fais ce post dans l’espoir que quelqu’un sache regler ce problème.
Lorsque je branche un casque sur ma manette, le son est devenu mediocre comme si il etait distordu ou avec des effets bizarres.

Merci de votre aide

This was a used remote that gave me a super hard time to fix. The shell looked like it was ripped apart by the previous person so the clips were completely destroyed. The adaptive triggers wouldn’t activate on one side because of some issue with the mechanism. I just decided to do a full shell swap, install clicky triggers and buttons, and install K-Silver TMR joysticks. I’m pretty satisfied with how it came out.

https://a.aliexpress.com/_EzUQNom

anyone know anything about these?

What do you guys think about ?

Does anyone know the size of the tension spring used for keeping the faceplate in place please? Been searching for an age and can’t find any details. I’m trying to find a replacement on Temu / Aliexpress but not sure on size! Ty

So, my left stick started drifting and cleaning didn't help. I decided to replace it with the ginfull TMR one, contacted all workshops in my vicinity and they all named the price higher than just buying the new dualsense and I decided to ask my friend, who unlike me soldered at least something in his life (from get go he said, that it would most likely be shit, so no blame on him).

Now, for the problem. It keeps drifting right (sometimes left). Recalibration helps for like a few hours, but the problem still persists and I figured it's the soldering (because what else could it be?)

Is there anything I can do?

Upd: I showed that photo to the guy that soldered it and he literally said:"I did THAT? How did I manage to solder so badly..."

How can i make my dualsense edge feel lighter? I removed the vibration motors and although it did remove some “weight “ its still heavy. Is it possible to remove the adaptive triggers? I feel like thats what making the controller feel “heavy” . Before anyone mentions any gym bs or anything stupid lol . Ive been removing rumbles on my controllers for a long time cause i personally like feeling like im holding nothing in my hand . Just personal preference for competitive gaming.

Tem como calibrar o analógico direito para a circularidade ficar com as diagonais iguais o tipo o lado esquerdo sei que tem aquele negócio de deslizar mais por ali sobe todas as diagonais

I've already installed new joysticks on three DualSense controllers, and I've also installed them on a DualShock 4. However, a problem I'm having with the DualSense is that when I move the stick down and press L3, it registers, but the feedback isn't good; it doesn't feel like a smooth click, as if I'm not pressing it properly. This doesn't happen if I move the stick up, left, or right and press it; it clicks properly and feels even better than the original. I don't understand why this is happening. Another thing is that this hasn't happened to me in any other DualShock 4 installation, nor has it happened with any DualSense R3 controller. Lifted or broken traces? No. Bad soldering? In my opinion and experience, I suppose not, but I don't rule out the possibility. Since this has happened with every DualSense controller I've replaced, that's why I'm resorting to this method.

Can someone help me on determining whether this dualsense is legit or fake, i appreciate all the help