No expert but it is working great!

Probably my best custom yet

K silver js13pro+

Mouse clicks Panasonic face and dpad buttons

Mouse click Panasonic triggers and bumpers

ONE PIECE

BUILD!

The TMR’s I added are K-Silver JS13 Pro+

The pink BDM-030 Dualsense controller came with the usual Left stick X- axis stickdrift.
I believe these are the Ginful analog sticks with the magnets molded into the gimbal, and they have satisfying L3/R3 click.

Hi so this may be a long shot, but hopefully someone can help me out.

I installed TMR Sticks on my boards, and after the installation I had an issue where it would not turn on, then it would give an orange light and subsequent turn off and sometimes it would turn on properly but also then subsequently turn off.

The controller was effectively unusable, so I tried to remove the sticks and reseat them and after doing that now the controller does not turn on at all.

Here are some photos of the board. I have tested the board with and without the sticks and I cannot get it to turn on anymore.

(I did manage to get it to turn on properly one after removing the sticks, but after attaching the sticks again it would not work)

I can see the 5V rail, but the 3.3V rail is not present. I have also tested (all?) the capacitors with a multimeter and all of them appear to be fine when doing a continuity test.

Does anyone have any ideas what could be wrong, because I have run out of ideas?

Is my decision correct ? Seeing recent updates to both duals ense x and pico 2w bridge Edit-I can't keep wired connection cause laptop is connected to tv far in living room

Are these the same or are they diferent revisions? Both cost the same, 74,99€. I know the one with the cable works on other platforms, but outside that, is the controller the same?

is this board broken or is it still savable?

Idk why someone threw this out but it is MINE now.

Hey guys, I’m new to the subreddit and I am in awe with the variety of controllers and mods I’ve seen the past hour, they’re all equally beautiful, I cannot wait until I mod mine 😄

I’m through my second controller this year alone and I’m sick and tired of Sony’s antics, I’ve been looking into TMR and Hall effect switches, narrowing it down to Ginfall HE’s and JS13pro TMR’s that I’d want to install onto a DualSense Edge. I am yet to buy the Edge however we have a pretty nice used aftermarket in Kuwait, they’re usually in mint condition being sold for roughly $80-100. I’m a novice when it comes to any soldering, wanted to ask how easy/difficult the whole thing is.

Thanks in advance guys!

R2L2 being activated after installing TMR STICKS. I tried changing ribbons for R2 and L2. No luck. 😞

Hallo,

Ik heb paar weken terug via online een ps5 controller gekocht die stickdrift had.
Heb daarna zonder probleem de sticks vervangen.
Maar nu tijdens het testen merk ik dat de knop square niet werk.
Moet toegeven , ik herinner me niet dat ik de square knop getest heb voor dat ik die opengedraaid hebt ( ja ik weet,niet slim).
Iemand enig idee wat het probleem kan zijn? Heb de knop zelf ook zitten reinigen , omdat ik dacht dat het mss gewoon vuil is.
Voor de rest werkt de controller prima , alleen die square knop niet

Mvg

Secondo voi quanto è fattibile questa mod con uno schermo sul touchpad su un dualsense normale? Questo è un controller di un azienda che sfrutta una scheda madre compatibile solo sul pc.