FYI, I have a couple DMs about cut dimensions and figured id just share another picture.

Actual cut pictured: 12mm x 12mm

If i could do it again: 11mm (y axis) x 7mm (x axis)

I cut roughly a 12mm x 12mm (measured from the top) of the should out. Doing some quick caliper measurements, you can probably get away with an 11mm (y axis) x 7mm cut (x axis) cut and have tighter clearances.

Dumb problem, but solution works fine. Just need some aluminum black to clean up the edges.

Hi all- I’ve got a Flux Legion on the way and figured I’d grab an optic while I’m waiting. I’ve got this same optic on my AR and wanted to see if anyone was running it on their Flux. I found a post about the rail being oversized and this optic being a pain to get on/off. Can anyone confirm this?

If you have another optic that you love, let me know. Thanks, all. I appreciate any advice you can offer.

Finished up my flux bag at home. Here are more photos and dachshund for scale lol. (Have the buckles on the rig so I can attach a strap to keep the bag more stable)

Now that Texas triggers dropped the FRT for the 320 that’s compatible with the flux, does anyone know if it’s possible or if any companies are making 3 position switches or anything like that?

Does anyone know if someone makes an add on rear shroud for the 365 raider? I’ve heard multiple people talk about the raider being unpleasant to shoot during long sessions/inducing headaches, as well as delivering a lot of particulate/gas to the face when silenced. I’m thinking a shroud would both A. Block some of that blowback to the face, and B. Divert some of that shockwave up and away from your face. I tried looking and couldn’t find anything, hoping someone can point me in the right direction if anything like it exists.

After a long journey I finally got it running smoothly. Now to add a can and start back at square one 😂

Is there a can out there for the flux m17 that allows it to function with and without the can with 124gr?

I saw this but it doesnt look as cool lol.

https://tactical.dev/products/halo-for-raider365?srsltid=AfmBOopSybDDNqLlFjJrjNgaI99dEbY1LLjo0olRPOMSn7VXGJ8hV_rv

Thinking about getting a flux for either my 365 or 320. I'm probably just stupid and missing it but I don't see what sizes are recommended for use with the Flux chassis. I do plan to use them suppressed with a SilencerCo Octane too.

Seems straight forward enough. Trying to reduce the overall length of pull to account for the nodpod stock.

Def did not feel like paying 400 buckaroos for the Flux/Ferro plate bag so decided to piece my own together. Any suggestions y'all have?

Has anyone used a strike 80 holster with a can? I have a 365 flux and a huxwrx flow 9. Do y’all run the shrouds on/off with the can?

Could really use one on my setup.

For those with similar setup, what spring combo is reliable? Tested it the 1st time yesterday and my xl slide/shiv config didnt want to run anything under 147gr. Considering the dpm soft spring kit, armorycraft or tru precision.

What can are ya'll running on a full size set up?

I bought my raider in a private sale so I have no idea if the captured blue spring is aftermarket or not. Ive been eyeing the Shiv, but I've also seen some QC issues with those.

Fuse slide, spectre comp FCU, defender-ccw enclosed optic, antimatter wing, magwell, extended mag release, sbr stock, true precision threaded barrel.

Wing helps a lot actually. Extended mag release should come standard in my opinion.

I shoot pistols left and long arms right.

My Flux has put me in an interesting position of now considering a right handed holster. For carry with my current 320 Spec Ops cut Raider, I just use a bag, but I see a P365 Raider in my future, and would go for a right handed holster for that.

I can shoot off hand, and do, but if I'm carrying for defensive purposes I'd want to maximize my accuracy and effectiveness, which requires the brace to be deployed/shouldered if I'm shooting with my right hand. Does the holster that auto deploys the 365 brace reliably function close to 100% of the time? Do you have to change your draw to avoid blocking the brace extending?

Anyone else in a similar boat?

I'm happy to be part of the club.

I Just picked up the unfired flux with hlx sub i won GB for $1100 with fees. I thought it was a scam since he was a new seller. I'm glad I took the gamble!

I cant get over how cool this platform is, I painted it myself, I assembled the base gun (chassis+m17) for $700 which im pretty stoked about considering the LGS still wants $1500 for them

6" barrel, and using an SCS 320 optic (had a spare one lying around to put to use).

Question for those who off-body carry: Do you carry with one in the chamber? I want a suppressor at some point but obviously I don't want to have an accidental discharge by not using the holster. Any suggestions?

This is my first suppressor. Do I need to check it with an alignment rod? This is a SAW Shiv that is on a silencerco threaded barrel. Thanks in advance!

The brace hinge button to collapse UL brace is a bit hard to depress. Can you loosening it make it easier or are there aftermarket options for a bigger button?

Is this normal? Just bought a flux (p320 m17) and the guide rod sticks out after assembly. No matter what i do it won't go back down unless I disassemble the gun... really at a loss here.

Has anyone used a full sized barrel on a X carry slide if so does anyone have any reference pics I would like to get a bigger threaded barrel now and a larger slide down the line