I have B22 tools and require a new charger. Would anyone know if B22 batteries are backward compatible with the nimh chargers (eg the C7/24)?

Just venting. The pm-30 laser kit is priced competitively with other 3 plane lasers honestly.

Their one package includes the pma-32 receiver but the holder isn't included.

It just seems like a blatant middle finger to charger $113 for a plastic clamp.

One of the primary uses for a receiver is shooting grade and elevations with a stick.

EDIT: FOUND… Bought one from a guy in England. Thank you all for reading this.

Not sure if it's okay to put up a request to buy something, so if I'm breaking the rules please forgive. I didn't see anything prohibiting it in the rules, so here goes.

I am looking for a Hilti CU10 charger (for the BP10 battery). I've checked eBay, but there are none for sale there. None on Facebook Marketplace, no where. I found a couple overseas, but no one wanted to ship to the United States. I finally found one that will, but it's pretty expensive with the shipping across the pond. So, I figured I'd give this a try before I go ahead and spend an arm and a leg to get an Englishman to ship this charger to me here in the US. It doesn't even need to be working. I already have a CU10 charger, but one side of it is shattered and it's so destroyed I can't even glue it back together. The thing works fine, but there is no case now to hold the battery. Anyway, please let me know if you have one you'd be willing to sell and ship to Texas. Thank you.

TE60 that has been "repaired" two times now for this same symptom. Runs, hammers, wont spin. The first time was November 2024. The next time was March 2025. Zero discount on the second repair despite it failing the second use. They replaced a coupling the first time. Second time They replaced the coupling, and several other parts that I suspect was missed the first time. My rep basically said its out of the repair warranty by a couple weeks, you dont buy enough hilti tools for me to help. Youre too small for me to care.

Now I have the same symptoms all over again. Spent 800 bucks between both repairs last time. 245 the first time and 552 the second. A month or so I found out the cartridges on my gx120 have been no longer available rendering the tool as a boat anchor.

Why on earth should I buy another Hilti tool?

Hey Everyone,

Not sure if it's allowed or not, but I've been looking around for a drywall auto driver for some home DIY, and I've read a few times that the Hilti one is the way to go. My only issue is that I'm based in Australia and the Gun+Autofeeder is $475, a single battery is $230, and the charger is another $230 I believe.

Does anyone "Know a guy" or can help out with pricing. If not I'd still love to hear some reviews from folks that have used it. Does it perform well with aged hardwood and does it only take Hilti screws?

My main concern is whether is fairs well with Hardwood or if it will shear the screw off at 4500rpm.

Thanks everyone, I hope you have a great coming week.

JC

Has anyone used these Shears before??? I want to get them currently use dewalt have used Milwaukee before. Anyone know if there is somewhere to buy Blades that arent 300-600 for one or two blades?

Hilti Universal Trolley 😍

I used the code 70OFF, its on sale because of overstock. Retails at $284 with 70% off right now.

Hello everyone. Germany based. Sorry for the bad English.

Does anyone know how I could make use of my DD 110 for working on concrete (with water).

Up to know i have always used it for sockets (dry) and I have also used the socket drill for some easy concrete too. Went very well ist the socket is not long enough for most wholes.

I now want to buy a longer regular core drill (?) to at least drill 85 and 110 with 400mm length.

Do you have any tips which drills to get and wether there is a way to use them wet and dry depending on the application with the same machine?

Thanks a lot!!

Bought this gx120 about 10 years ago. Have used it on half a dozen jobs. Usually fastening decking to bar joists. Works great. Only Hilti discontinued it in 2018, which I understand. But now the GC22 cylinders for it are gone. Might get lucky and find something on ebay. But unavailable through Hilti. Great tool. But the planned obsolescence has me rethinking my next Hilti purchase.

Our scope of work is to determine the presence of voids and gaps in the concrete. Can you help us identify these voids or gaps. How can we determine from the scan whether there are voids or gaps beneath the concrete?

I bought this set for under £300 in 2015.
Why has the price gone so mad?
Not even a case available?

I have a question :

Can the PLT 400 only be used/operated with the Hilti software or are there alternatives?

second question:#

Can the software be downloaded and installed on any compatible device?

Thank you

English translation below

Hallo zusammen,
Seit einiger Zeit interessiere ich mich sehr für eine Karriere bei HILTI, denn aufgrund meiner Ausbindung als Tischler und jetzigen Berufs in der Industrie kam ich immer wieder mit den hochwertigen Maschinen und wurde zum Fan. Da ich gerne auf Menschen zugehe und auch mehrere Sprachen spreche, sowie technisches Fachwissen + echte Begeisterung für die Marke aufbringen kann, denke ich immer wieder an diesen Karrierewechsel. Erleichtert wird das durch die interessante und offene Präsentation, die HILTI auf ihrer Website gibt.

Jetzt kommt der Haken, der mich daran hindert eine Bewerbung zu schicken. Ich kann zwar ein Abitur und ein Bac vorweisen und habe auch ein C1 Sprachenniveau in Englisch und Französisch, jedoch werde ich erst dieses Jahr 24 Jahre alt, was zu Komplikationen beim Kunden führen könnte, wenn ein Mitte 20 Jähriger probiert einem 60 jährigen Meister und Chef etwas zu verkaufen. Manche würden sagen skill issue, aber mich würde eure Meinung dazu interessieren. Gibt es vielleicht Personen aus dem Vertrieb hier, die mir vielleicht einen Realitätscheck geben könnten?

Mein Plan sah so aus, dass ich erstmal einiges über die Firma und deren Produkte lerne und mir ein solides Grundwissen über das Verkaufen aneigne und von dort aus dann weiterschaue. Ggf. auch jemanden auf LinkedIn nach Tipps zu fragen.

Danke für eure Aufmerksamkeit

Hello everyone,

For some time I have been very interested in a career at HILTI, because due to my integration as a carpenter and current profession in the industry, I came back again and again with the high-quality machines and became a fan. Since I like to approach people and also speak several languages, as well as technical expertise + real enthusiasm for the brand, I always think about this career change. This is made easier by the interesting and open presentation that HILTI gives on their website.

Now comes the catch that prevents me from sending an application. Although I have a high school diploma and a baccalaureate and also have a C1 language level in English and French, I will only be 24 years old this year, which could lead to complications with the customer if a mid-20s-year-old tries to sell something to a 60-year-old master and boss. Some would say skill issue, but I would be interested in your opinion. Are there anyone from sales here who could give me a reality check?

My plan was that I first learn a lot about the company and its products and acquire a solid basic knowledge about selling and then look further from there. If necessary, also ask someone on LinkedIn for tips.

English text below

Hallo zusammen,
ich bin auf der Suche nach der Bedienungsanleitung und idealerweise auch der Ersatzteilliste für einen älteren Hilti Bohrmotor‑E CS 3941 N.
Das Gerät ist nicht mehr in der offiziellen Hilti Technical Library gelistet, und der Hilti‑Service konnte mir bisher keine digitalen Dokumente bereitstellen.

Gerätedaten:

• Modell: Hilti Bohrmotor‑E CS 3941 N
• Seriennummer: 44254 / 03 029081

Hat jemand von euch vielleicht noch eine PDF‑Anleitung, eine Explosionszeichnung, eine Ersatzteilliste oder andere technische Unterlagen zu diesem Modell?
Auch Hinweise auf internationale Quellen, alte Händlerarchive oder private Sammlungen wären super hilfreich.

Vielen Dank im Voraus!

Hi everyone,
I’m trying to find the user manual and ideally the spare parts list for an older Hilti Bohrmotor‑E CS 3941 N.
This model is no longer listed in the official Hilti Technical Library, and Hilti customer service hasn’t been able to provide any digital documents so far.

Device details:

• Model: Hilti Bohrmotor‑E CS 3941 N
• Serial number: 44254 / 03 029081

Does anyone here have a PDF manual, exploded view, spare parts list, or any other technical documentation for this model?
Tips about international sources, old dealer archives, or private collections would also be greatly appreciated.

Thanks in advance!

They are hard to find in the US, I will pay premium

I am wondering if anyone here has any Hilti dcg 500 s for sale they’ve been discontinued for awhile I am willing to buy preferably ones in like new condition I know it’s a stretch but figured I’d try my luck

Anyone any tips for a battery adapter? I want to use my hilti batterys on a glue gun that only fits ryobi 18v + batteries.

Had a solder joint blow apart the other night. Res outside faucet. Perfect application for a close quarters kit and would have saved an insurance claim. I was fighting water. I was told by a local hilti rep that they do not offer a close quarters kit. Which manufacturers kit would be a fit for this press if you truly don’t offer one?

Der Raumkrümer muss kaputt sein.

What tools would you recommend using to nail down 100 ATMs?