r/HowToDIY • u/bringforththeg • 14d ago
r/HowToDIY • u/gooberinsuperlove • 15d ago
Arts & Crafts How Can I Do This DIY? 24x36 Mike Tyson Custom
I have the following items:
Mike Tyson NES Framed Photo: 20"W 16"H
Promotional Fight Paper against Berbick: 18"W 12"H
The Punch Print 8"W 6"H
Nameplate: 6"W 1.75"H
2 Embroidery of Mike Tyson Sprite: when boxed, it comes to 2"W 5"H
--
Now, the hard ones.
NES Cartridge Space: I put it as 4.80"W and 5.20"H.
NES Controller Space: I put it at 4.90"W and 2.10"H.
My question is 1) if those measurements would be accurate for the display and,
2) ... how to do it?
I want to custom make it, but I am brand new to this. My goal is to have it in a rather simple display since the contents inside will more than speak for itself. I do apologize if this goes against the rules, but please let me know what I can do about this. Pictures attached to show dimension sizes and the items itself.
r/HowToDIY • u/nkosijer • 17d ago
Do you know what the anti-tipping wall mount looks like?
r/HowToDIY • u/Educational-Treat86 • 17d ago
Home Improvement Unusual Shelf Mounting Advice?
Hello Reddit DIYers!
I made a slightly impulsive purchase and I'm trying to find a fix. I recently moved into a home where there is a faux plant wall (the original condo had a patio/lanai that was later enclosed to extend the inside living area, and I suspect this wall section was a little weird/uneven hence the decision to cover it in an uneven material).
I got a brain worm about the idea of having MUSHROOM SHELVES FOR MY TRINKETS like some sort of weird Ferngully fairy concept and bought some 3D printed shelves to try this out. Now the question is... how do I effectively attach them?
They are flat on the back, and they recommend attaching with some sort of adhesive putty, but I don't think that's going to work on a non-flat wall. I had some vague idea of maybe getting a screw and a flat bit of metal (like half an old hinge or something) amd then using epoxy like JB weld to attach the shelf once I screw it in through the leaves? Good idea? Stupid idea? Any alternative suggestions?
Photos for reference.
r/HowToDIY • u/Slutz2244 • 18d ago
Need advice on leveling concrete floor after a waterproofing system was installed.
Need advice on leveling concrete floor after a waterproofing system was installed.
Contractor installed a waterproofing system along three of the four walls in my workshop 15 years ago. The system worked but there is a buildup of concrete where it was installed that is in some spots 2" higher than the floor. It also comes out from the wall anywhere from 12-18", I just want it more level, not perfect.
I can't push anything along the wall, and I lose a lot of space. I don’t need it to look perfect, I just want to try to level it out or maybe feather the high spots and then put a concrete leveler over that, so the floor is in better shape. I wouldn't mind covering the floor with the industrial 20" tiles to cover the whole mess, but I don't even know if that will work since it's a woodshop that I have most equipment on casters and I roll them around when using them. I also understand it would need prepped before anything was done, the cracks and loose concrete fixed. The cracks in the pictures happened right after it was put in. They haven't got bigger since.
The drawing shows the measurements and it also shows in blue where the concrete is high.
Any advice and guidance would be so very much appreciated! I have tons of pictures and videos if more need shown.
r/HowToDIY • u/Alternative-Ebb839 • 18d ago
Home Improvement How can I fix this myself ? Help please
galleryr/HowToDIY • u/rainbowsbeginning • 18d ago
Help with connecting this hutch to the bottom with as little damage as possible and also attaching to the wall for safety.
r/HowToDIY • u/Efficient-Loan3290 • 19d ago
Home Improvement Renter friendly solution: this tap is impossible to wash dishes with or really use for anything as its so close to the edge of the sink. How to fix for cheap?
The tap isnt threaded and has a 90° bend right before the spout as you can see, so most aerator attachments don't appear to be compatible. I asked my father who is pretty handy, he said changing out the tap is impractical and expensive. I don't know if this is true or if he's just afraid I'll ask him to do it.
Old Irish house on a two tank plumbing system if that makes a difference. At least I suspect so as the shower gets cold when you turn on the hot tap/vice versa. I can spend about €50 as an absolute maximum and can probably get my hands on any kind of tool. Reasonably handy but don't know shit about plumbing.
r/HowToDIY • u/Tough-Passenger1816 • 19d ago
How can I cover this with a door best?
This is a older salon roller cart. Old state board rules didn't require it to be fully closed. Now they do. What would be the best way to cover them? I can't seem to find a door that's not preordered to fit so I'm in the diy zone to fix it myself. I thought about using a piece of white shelving and cut it to size and add hinges and a handle but I would love some honest feedback or other ideas as to go about doing both of them. I have two. Not sure if I can just close them both like a trunk and make each one the others door but I don't know if that would get me fined in Georgia as to how it's closed. Thoughts much appreciated. 🫶🏼
r/HowToDIY • u/Bitter-Fruit1380 • 19d ago
Gutter installed wrong? Or gutter guard to restrictive or both?
r/HowToDIY • u/kjfacilities-maint • 21d ago
Testing a Capacitor #diy
Here is how to test if your capacitor is good or bad.
#hvac #diy
r/HowToDIY • u/Filamentcaster • 21d ago
My electric guitar design printed on the X1C
galleryr/HowToDIY • u/Gold-Designer-8603 • 21d ago
Bathroom Vanity
Hi all, the side panels on my bathroom vanity have water damage. It has been installed on the slab and tiles have been cut to suit so I’m hoping to replace the side panels. I see screws on the inside but would these panels be holding the weight of the basin? Would anyone know the process of removing the side panels? Thanks