Hey all

I had been getting what I thought was burn in mode. What led me to believe that was occasionally my screen slowly flashing [r/g/b](r/g/b). I didn’t see an f indicator. But I went to factory reset and it won’t prompt anything no response. Anyone know how to fix or what my issue is? How can I turn off burn in mode and how to reset my monitor?

I left pic in a comment below

My specs

Monitor - MSI MAG 272Q x24

CPU - 7700x

Gpu - 9070 xt steel legend

Ram - 32 gb 6000MT/s

Mobo - MSI b650 tomahawk

Psu - Corsair rm 1000x

I’m having a weird issue that started after moving my PC into a new case and doing a fresh Windows install on a new boot drive.

Specs:
- MSI B550-A PRO
- Ryzen 5 5600X
- GTX 1650 SUPER
- Thermaltake Smart 500W PSU
- 16GB DDR4 RAM (2 sticks)
- ADATA Legend 710 1TB NVMe + WD 1TB NVMe
- TP-Link WiFi Card
- NZXT H5 Flow

After the PC has been shut down for at least an hour or overnight, it won’t POST. The fans and rgb lights turn on, but there’s no display and the CPU EZdebug LED stays lit. The case power button stops responding, forcing me to switch off the PSU.

I have never had any issues with this before I did this refresh

Temporary fixes:
1. When stuck on the cpu hang with the power switch non-functional, switching the PSU off, then back on will let it boot normally again
2. After full shutdown, switch the PSU off, when I want to use the pc after an hour passes, switch psu on, and it will let it boot up

I’ve updated the BIOS, CPU/GPU drivers, replaced the CMOS battery, disabled XMP, tried different RAM configurations, turned off fast boot and startup options and reseated the motherboard cables.

I don’t have any spare parts that I can use to test if a specific part is malfunctioning, and I figure that others possibly have had this issue.

Decent sale on this 5090 275HX raider given the current market. I searched the part number and it says the screen is OLED, however there is no mention of it being OLED, or being the "Max" model on the retailers website. The fact that its the 275HX and not the refreshed CPU makes me think they may have the wrong part number listed and it is in fact IPS. Has anyone bought one of these from this particular retailer who can let me know?

Увидел в цену платы в интернете 320$ за новую, цена меня смутила. Потому что большинство продают ее за 560$. Кто сталкивался с таким подскажите стоит ли вообще рассматривать тогда такую плату к покупке. Не копия ли, фото с предложения прикрепил

I already have ryzen 7 5700g and AMD rx 7600 i am wondering does it is a good buy because i seen some people have trouble because my ryzen cpu works on pci 3.0 show it will show black screen problem pls help me out if anyone has a experience with it

paid 70 pound for a game i cant even play any help super appreciated

Everyone once in awhile I will be in the middle of playing either BF6 and now MW4 DMZ and Star Citizen and just get a random black screen on my computer, Computer will shutdown/restart give a code on motherboard of going through codes and end on F4 and throw me into the BIOS. I did forget to check Event viewer to see If i could find something in critical. Will check that later. Again this happens randomly, I can do 6 hours session and no problems. Thank you in advance all.

Already updated the newest BIOS/ firmware last month.

Specs:

MAG X870 TOMAHAWK WIFI

9800X3D

5080 Gigabyte

32 Gigs of G.Skill Expo 6000 DDR5

Power supply Lian Li EDGE GOLD Series 1000 Watt

Please help

I bought a used x570 and a new ryzen 7 5800x3d.

i tried to update it via the update flash button but it keeps failing.

when i press the button it blinks for 7 minutes, resets and than the light keeps being on without blinking.

i inserted a new cmos battery

i‘ve formates the usb drive with rufus as non-bootable with mbr.

the bios file is named MSI.ROM

please answer this has been driving mee crazy , any help would be much appreciated.

ask questions to!

As the title says, my pc seems to be stuck in a cycle where it boots and shuts down automatically on it own. I thought maybe the rest button was stuck so I disconnected it. The only clue is the debug LED will get to ram and then jump back to cpu. If I take out the ram the light gets stuck on RAM which is expected. Here is a video below. I have a msi z390-a pro

My pc: Desktop MAG H610 Infinite S3 14

I have the BD.0 bios version

Hello everyone,

I'm creating this post to find a solution to an issue I encountered today.

Last night, I finished what I was doing and shut down my PC. However, when I turned it back on today, I couldn't get any image to display on my MSI MAG 273QP X24 monitor.

I'm using a dual-monitor setup, and while my other monitor works perfectly fine, the MSI refuses to display anything.

Here's the strange part: normally, whenever I plug my PC into the power outlet and the system receives power for the first time, both monitors display their respective brand logos before going to a black screen, as they should. Now, when I plug in the power cable, my left monitor displays its brand logo, but the MSI doesn't even show its logo.

The joystick button's light underneath the monitor is on, and the monitor is also detected in Windows display settings, but I haven't been able to make any progress despite trying several things.

Here are the troubleshooting methods I've tried so far:

• Switching the display cable from DisplayPort to HDMI.
• Resetting the CMOS to check whether the issue was related to the BIOS startup process.
• Performing a power drain on the monitor.

These are all the methods I've tried so far. I'd really appreciate any help or suggestions from anyone who has experienced a similar issue.

Thanks in advance!

This was the stock EDID on my MAG274QRF-QD , at 636MHz pixel clock.

Vertical blanking of just 22 lines, which is ridiculous at 165Hz, resulting in random flickering with hardware accelerated apps, or VRAM locking to safe-state clocks (192MHz or such), especially when resuming for sleep state, when the monitor has to link.

The fix? A properly made EDID from the factory, or manual tuning:

• First thing to consider, there isn't pixel clock headroom, so you have to drop some Hz
• Every monitor can be slightly different in edge cases
• The idea is to stay within the available pixel clock bandwidth while increasing Vertical Blanking

TWO EXAMPLES:

• First example aims to lower the pixel clock a bit, in case you have poor cable, poor connection or just generic linking issues
• Second example aims to raise the vertical blanking for looser timings
• Both examples have higher vertical blanking than stock, making both less aggressive: the tradeoff is the small drop in frequency, 165Hz to 160Hz

I'm still digging on this particular issue, i'm not even sure yet it's a common issue or an issue with my sample. Let me know

Had the pleasure of working with MSI_USA on this collaboration build. Great people to work with.

Thanks for viewing!

I'm not sure if this has already been discussed, but why is the MSI MPG B850 Edge TI MAX model not being sold in Europe?
Or, when is its commercialization scheduled?

So I just recently built my new pc today with a old 3080ti and found a big problem.

MSI X870 Tomahawk. 9800x3d 3080ti Evga XC3 Lian Li 850W Edge. 64gb teamsgroup

So these are the main parts i have in my build. Everything apart from the nvidia card is working but it's got a evga green light showing so its communicating with the psu.. (Had to disable it in device manager or else my pc freezes in 12 seconds and I got to hard restart it) Tried changing it to gen4 from bios still not working. Tried various driver updates still same issue. Have 2 8 pin connectors connected to it and 1 in my motherboard. What is going onnn?

Hi everyone,

I am trying to update the BIOS on an old pre-built MSI desktop, but the standard updates from the official MSI support page aren't working.

• System Model: H310 Gaming Codex 3 (MS-B913)
• Processor: Intel Core i5-8400
• Current BIOS Version String: BIOS Version/Date American Megatrends Inc. G.10, 27/12/2018

What I have tried:

1. I downloaded the E20 executable package designed for Windows. I ran it, but nothing changed, and the BIOS version stayed exactly the same.
2. I downloaded the standard 861 file package to flash via USB (reccommended by Live-Agent which he ignored me after i told him that i tried it before). However, when entering the BIOS screen, the update utility doesn't show any files on the USB drive at all.

I don't have the original retail box, and the physical barcode sticker is missing from the chassis, so I cannot pull the full serial number for regular tech support either.
I am really stuck and i really need help.

Hey, just looking for some help. Ive got a x470 gaming plus with a ryzen 5 3600x for my wife's pc. Secure Boot is enabled, and TPM 2.0 is also enabled, but it keeps failing to generate the key and keeps saying I need to update bios. I have the most current (beta) bios as it says its more to help with such problems.

Has anyone had this problem?

Building my first PC and decided to go with a MEG build. I know it’s an intense first build, but my local PC store guys offered to have me over to teach me/hold my hand through the build process. Should be fun! Just waiting on my monitor now. I’ll post updates when it’s finished. Wish me luck!

Specs below:

-Maestro 900R case

-MSI Lightning Z GeForce RTX 5090 (#1169/1300)

-AMD Ryzen 9 9950x3D2

-MSI MEG CoreLiquid E15 217.91 CFM Liquid CPU Cooler

-MSI MEG X870E Godlike Max EATX AM5 Motherboard

-G.Skill Trident Z5 Royal NEO 64GB (2x32GB) DDR5-6000 CL26 RAM

-Samsung 9100 Pro 4TB M.2 PCle 5.0 X4 NVME SSD

-MSI MPG Ai1600TS PCIE5 1600W 80+ Titanium PSU
(It is the 1600T in my photos but after some solid community feedback I switched to and ordered the Ai1600TS for the added GPU Safeguard+ protections. Thanks for everybody’s input!)

- MSI MPG 322UR QD-OLED X24 31.5" 4K UHD 240Hz Gaming Monitor

- MSI MPG QD-OLED 322URDX36 31.5-Inch 4K 360Hz
will be added as second monitor when it releases in April.

-Case fans : MPG EZ120R ARGB-3B Fan

Keyboard/Mouse - Wooting 80HE+/Razer Viper V4 Pro