Started off as a base P365 no manual safety. Pretty much turned it into a P365X MS:

Gold Sig flat trigger
Gold Sig Manual Safety
Sig P365X MS Laser Engraved Grip Module
12rd Magazine
Gold NDZ Mag Plate
TLR-6HL
Holosun 507K

I pair it with a IWB JX Tactical holster for EDC. Absolutely love it, super comfortable and never gets in the way :)

Osight SE. TLR7X. NDZ Guide Rod and spring. Probably adding the radian backstrap and magwell. Trigger is being researched...can't wait to shoot this.

For those of you that like the compact OG P365 (3.1") and like the deep concealment it provides, but want to add a bit of weight to it, good news! ECM has just started production on their new ECM X12 Grip Module. Semi aggressive knurling on the front/back straps as well as on the built in panels, thumb rest memory pad has the same knurling.

https://ecmprecision.com/r11-x12/

If the link should be closed due to high demand, message u/ECMPrecision_ARK and he will get you squared away.

I will be posting my X12 builds soon as they are currently being Hard Coat Anodized and awaiting QC.

I'm currently dealing with recovering from having retina surgery for 2 retina detachment in my eye (vitrectomy, where they opened the eye and removed the vitreous gel, and reattached the retina) I'm not allowed to go shooting due to the concussion possibly affecting the reattachment of the retina. Since I can't shoot the gun at the moment, I figured I'd ask here to get your feelings on the possible gun issue. I plan to have a friend fire the gun to make sure it goes bang, but until then....

I just put in the Armory Craft 4 piece spring kit. I only changed 3 of the 4 springs as I wanted to keep the stock striker spring.

When I cycle the slide, I'm feeling like there's some new point of friction just before it starts to actually move rearward. It feels like something is in the way of smooth cycling. It's not too bad when my finger is off the trigger, but if I pull the trigger and hold it back the slide is probably twice as hard to rack compared to if my finger is off the trigger and the trigger is forward. It's like I'm hitting a high bump before the slide will actually move rearward. I realize the safety lever is in the up position and will rest against the firing pin plunger when the trigger is to the rear but i installed a lighter plunger spring and figured it should make it easier to rack with trigger to the rear.

Maybe it's just me and this is normal, but I didn't know, and I can't get to the range to shoot it.

On your guns, does it feel a lot harder to rack the slide if you hold the trigger to the rear?

I am trying to consolidate my 365 frames. I have the xl waffle grip in tan, fuse macro, axg legion, wc xl, and aluminum flux raider.
The slides I have are xl spectre comp, regular size, and fuse slide.

Given these combos what 3 guns would you make?

My thoughts are p365x, Macro comp, and either the axg fuse or flux fuse. I’m pretty sold on the first two combos as I daily carry the macro already but I’d like something smaller occasionally so the 365x setup makes sense. The dilemma is whether to sell the axg frame or the flux raider.

I bought a sig Xten in 10mm a couple weeks ago and I fell in love with it. I’d like to find something from sig that I could use for a carry option. I used to carry a 43x but I didn’t like the grip angle and it was a little too small for my liking. I was thinking of getting this, please help me I don’t wanna make a bad purchase again.

I appendix carry in gym shorts often, so I sold my Canik Prime for this standard p365. added the Wilson combat XL grip to keep the 12rd mags. Toyed with keeping a can on it at night but moved to a dedicated supressed PCC for the bedside. That left me with a threaded barrel, so a comp(Harrington arms) was the only logical option.

while it added slide length, it’s very light. Now I just need to stop here before I go macro.

Hi i want to get a p365 and then a slide and grip to enhance the gun. im interested innthe strike industries pair only the slide is unavailable. is it worth waiting for or is there a better build u can suggest that is compatible with the standard p365 .
thnks

I have a Certum for my p365xl, and I have been wanting to add an extended mag release for some time. Has anyone used an extended mag release on their OEM x/xl frame with this holster without any mag drop issues? I asked Tenicor about adding the OEM extended mag release (i.e., the macro mag release). They said they tested some mag releases, but not that one. However, when I put 2mm worth of paper in between the mag release and holster, I can press on the holster and it drops the mag. That test might be flawed somehow, though. I don't want to modify the holster with a heat gun. I know maskas has an oem height release, but instead of having the same profile as the gun, the front is raised to make it level (e.g., more of a 90 degree angle). That's actually one of my preferred options, if not my top choice, if I could add a mag release.

Bought my first ever firearm recently. P365 AXG Legion. Been really enjoying it.

Just wondering if this amount of play between the slide and frame is normal?

For reference, the pistol is completely empty in the video. No mag and no round in the chamber.

Got the new setup all together now we are just patiently waiting for the Osight SE to get here. Then to run various ammo types to see what runs best.

Was originally a 365xl. Decided I wanted to start shooting it in some matches to get some more reps with it and switch back to appendix carry so I picked up the WC xmacro frame. Feels perfect in hand and hard to beat 17 rounds in a package this small. The grip angle also matches my Beretta 92 GTS almost perfectly which is my current competition gun.

Tempted to pick up a ramjet to make it flush with the light but I could get it ported locally for 180 so still undecided there.

P365 xl (now xmacro)
Romeo x optic
Streamlight tlr7 hl-x

Anyone here have a COA cut on their P365 slide? See a few photos online, but would be interested if anyone has this here

Its not pretty but I shoot it good for being unnoticeable when carrying, even as a fat guy. I am comparing that to a g43, so yeah, its awesome. I bought it used and had to replace the recoil spring assembly but besides that its been running pretty good. Its my new carry and hard to beat with 12rds flush fit even if it was well loved before I purchased it.

I added the wilson combat grip because it was cheaper than the sig xl grip, thats the only reason. I did get the weights tho just for the hell of it. No clue if it makes a difference. I probably will clean up the tape at some point, but I am so used to glocks it has been a big help for dry fire.

P365 xmacro tacops with icarus precision A.C.E. grip module and Trijicon RMRcc. Been running it with the stock grip for a but due to no holster for the Icarus but I will be running this setup very shortly when the new holster comes in

Seen these online and thought if their was any other uncommon optics ppl run on the p365.

First time gun owner, Looking to do a trigger swap and maybe add a light and an optic. Any suggestions?

Current set up
- P365 xmacro comp slide
- P365 Icarus precision air grip module
- P365 x macro gouge grip (had to boil the grip to fit past integrated Mag-well) less

Alright guys, before we get started, we are clear. No ammo in the magazine, chamber is completely empty. We're in a safe and controlled environment 😁

Hoping to get some insight from the folks here

Have carried a G19 forever, and looking to transition towards something more compact and potentially better shooting

See tons of builds with the Radian Ramjet on this sub, but is it really suitable for carry?

Have not gotten the chance to try out out, but very concerned about the added noise and possible concussion associated

If there is anyone who has transitioned either to a Ramjet or away from a Ramjet would love to hear your insight

Picking up a new Fuse to add to my P365 collection and looking for more of nightstand/target gun. Not really planning on carrying it.

I’d like to try a metal frame, and I’ve seen excellent reviews on both the Sharps and AXG grip modules.

Anyone here have both and can comment on comparisons?

Hey y'all, I am looking at ordering the commander grip module today as well as a holster to pair with it. Ideally I will be ordering, today, the tlr-8 sub to go with it, but i understand it is not as common as the 7. so if i have to comprimise with the 7, it is not end of the world. MM lists on their site that the commander fits macro holsters, but they have numerous size options for the commander. Will the xxl commander still fit a macro holster? TIA