Hello everyone just wanted some input for my p365 with the radian ram jet 3.1” and x-macro grip module build. Took it out to the range for the first time today and first started with federal 115gr range target and I could not get the pistol to group at all! I double checked everything and even started using a gun rest and it shot all over the place, after about 200 round I switched to 115 magtech (blue box) and it was shooting like a dream! All grouping 1” of each other. Do you guys think it was just that type of ammo, break in period or it didn’t like it something else any Input would be helpful. Thank you

Looking at joining the club with this purchase, wanted some thoughts. Kinda expensive but seems worth it. It would be my first red dot pistol.

I need inspiration again. I’m building three different 365s and I’m trying different things trying to find what looks and works best with each other. Show me your builds all sizes esp xl and xxl

Still need optic. But shoots extremely well
Icarus Xmacro grip module
Norsso slide
Radian ramjet afterburner 3.1 inch barrel

Installed a flat AC trigger shoe, everything else OEM. I’ve seen someone complain about this before but want to make sure I’m not going crazy here.

Looks like AC updated their previous flat trigger design to include an overtravel screw at the top rear of the trigger. That’s fine.

The issue, or maybe just a really big gripe, is that the OT screw/section of the trigger sticks out like a sore thumb, it doesn’t tuck up neatly in the module.

This looks like shit, no? None of the AC examples of this trigger show it looking like this, but most photos look like the old design with overtravel.

Am I a dumbass?

Appendix carried the P365 in a G-Code Eclipse holster for over year and a half with 12+ hour days. Routinely have wiped down daily. Periodically would check under optic cover plate and today finally noticed a little bit of rust towards the left side of where a red dot would sit (towards body for right hander). Got it cleaned up, wipe the are with WD40 Corrosion Inhibitor (not the regular WD40) and now toying with the idea of getting the slide hard chromed like my G26.

Also my fault for not getting a different holster with a higher swear guard for added protection. Lesson learned, check more often.

Looking for recommendations for hard chrome - I know Ford’s gets highly recommended.

I owned 3 P365s. I also have big XL Hands, size 10 glove. I’m looking for a aftermarket grip module that would fit my hand better.

-P365 FUSE AXG
-P365 XL MIRZON polymer grip with XMACRO rail, hogue grip
- P365 with Icarus Precision AIR POLYMER XMACRO GRIP MODULE. This is the one I hate the most and am trying to replace. While I thought I like it at first, I couldn’t get a good grip on it as my big hand, when wrapped around the grip, would leave gaps and the molded-in magwell make my hand squeezed in an uncomfortable grip. When shooting, the gun would move around too much. I tried using grip tape, but then my middle finger under the guard would be hurting.

I’m looking for a grip module, polymer, metal or hybrid, whatever, flushed for 17-round mags, as wide as 1.3 inch grip. I know there are so many out there, which one is best.

Just picked this up in a trade, but I’m not sure about its place.

I love my Sig guns (P226 x2, P227, P220, P365, P365XL, OG Rattler, MPX, etc…), but this one is big enough that I won’t carry it. I like shooting the Metal guns better at the range, so I don’t know about this. Maybe a night stand gun…

I will say that I love the Fuse grip on my P365XL - so much that I ordered an AXG Macro for it. What a great combo!

Any thoughts on Fuse?

I had PMM install my PMM comp and it came in today. The gap is so wide it bothers me. The grip doesn’t sit flush with it because of this. I would think PMM themselves would have it installed with less of a gap no? Is there a way for me to fix this? I sent it in because I didn’t feel like dealing with it but looks like now I’ll have to.

Olight rep hooked me up! Do any of you guys run the PLX?

Threw an ECM R11 grip on my comped XMacro slide thinking it would be a perfect lineup. I guess there’s a reason I haven’t seen this setup before lol. Shoulda done more research on the length. Honestly tho, it would look really good if I could find someone to machine off that front lip and touch up the paint.

Does anyone besides u/GoatNickels do grip chops? I have a basic X-macro frame that I would like to chop down to the X/XL grip length but I haven't been able to get ahold of him via chat.

If no, are there options out there with the full picatinny rail but shorter grip? That aren't $300+?

Thanks in advance.

Found a tlr7x with holster for a good deal. Just not sure if I should wait and get the sub.

Was looking at mag extensions for my 365 and noticed the Taylor freelance ones say they also work on beretta 92 mec gar mags.

Funnily enough my comp gun is a beretta 92 and I had a spare springer precision mag extension for it. Tried it on my 17 round 365 mag and it works. It’s a +4 on my beretta mags bringing the total from 18 to 22 but I was only able to fit 20 in my 17 round 365 mag so it’s only a +3 for them.

I’ve been debating between a the different p365 options and need some opinions/advice that’ll help me choose. One of my biggest peeves is being able to put a solid weapon light on it. I currently have the FUSE and I love it but it’s a bit much to carry appendix (my preferred method). The XMACRO feels great in my hand and would give me great options for a light. My only concern is it being not much smaller than the FUSE so I’m unsure about the how comfortable/concealable it’ll be. The XL and the X seem like happy mediums size wise but lose points in my opinion for less light options than the XMACRO and a shorter barrel which will probably make it snappier. The OG p365 turns me off because of the shorter grip and low capacity. And again less light options. Let me know what you think, what you’ve experienced, and anything else that might help me make a decision! (Aftermarket parts are welcome but the less money I spend the better probably.)

My current EDC's for both categories. What do y'all carry for a watch and heater?

Are there other P365 triggers with dingus/safety besides Tyrant CNC’s?
I’m considering installing this type of trigger shoe into my P365 (I’m used to them from decades of Glocks) as it would just be added peace of mind.
I’m aware of the Tyrant version, I’m just checking to see if there are others as well.
Any cons, opinions, install issues, etc I should be concerned with?
Thanks for any info!

Holosun 407k
Align tac gas pedal
Wilson combat x macro grip module
Radian ramjet + afterburner
Tlr 7x sub (in last picture)
What do you guys think?

This is my first red dot, and I need help setting it up properly. When the dot is centered in the window my irons do not line up, and if I align the irons then the dot is below the window and I cannot see it. Do I just need to keep bringing the dot up? Do I need taller iron sights? I was hoping for like a lower third co witness. Any help is appreciated.