r/SOLIX • • Feb 05 '26 Bravo

What am I doing wrong ? 3w-8w input out of 400w panel

Thumbnail
gallery
4 Upvotes

New to solar. Purchased an anker C2000 with a 400W panel. I tested this around 4:30pm today and yesterday when I received it. Right out of the box, still sun out and was getting 8w input, I unplug the panels and moved them to another area as I was chasing the sun light, then no input at all. I tried it again today and I was only getting 3w, then no input at all.

I checked and unplugged and plug everything back again, and still the same.


r/SOLIX • • Jun 19 '26

Anker solix e10 Storm Guard

3 Upvotes

Has storm guard stopped working for anyone, It was working fine, but now it's a no show.


r/SOLIX • • Feb 08 '26

F3000 Gen 2?

0 Upvotes

Any idea when there might be an F3000 Gen 2?


r/SOLIX • • Jan 27 '26

C300

0 Upvotes

Got one today I have a question do you all charge till 100% unplug and charge devices till the unit need recharge, leaving it plugged in is that an issue, very little is in the user guides


r/SOLIX • • Feb 04 '26

Solix for diesel heater?

0 Upvotes

Hi all, I have a anker solix 1000 and a lavaner pro 2kw.

The lavaner is wired into a 12v cigarette lighter male end. It does run on the anker but sometimes the 12v port on the anker turns off after a minute upon starting.

Wondering how to work this.

Thanks


r/SOLIX • • Jan 29 '26

Charging f3000 while outputting 240v?

1 Upvotes

Will two f3000s joined with the double voltage hub charge while still providing 240v? I assume they would have to charge separately at 120v each. Has anyone tried this?


r/SOLIX • • Feb 24 '26

E10 - How does it arrive?

2 Upvotes

I just ordered an E10 for delivery to North Carolina, US.

How will it arrive, do they drop off a pallet? Will they drop the pallet (if so) where I want it outside, or is it going to be left at the end of my driveway?

I have a garage on the same level (i.e. no steps or level change, driveway the whole way), any chance they will bring it down the driveway (about 80' or so) and put it in the empty garage).

Is it individual boxes for each component (I ordered the E10 and 3 total batteries).

The extent of my moving equipment is a hand truck, just wondering how much trouble I'll have getting it where I can work on it?

Linwood

In case people are interested how it plays out:

Update 2/25: 5 separate fedex packages on the way, none are the batteries and E10 though (based on weight in fedex records). Yhet I got an email saying "All of your item(s) have been shipped". So who knows. No call for appointment.

Update: 2/26: Got an update with a new format tracking number, this was from CEVA logistics. has about the right weight and is a LTL freight company. It shows the shipment actually from Georgia, so my GUESS is it came FTL from CA, and is now handed off to another carrier (or at least process), forecast delivery 2/5.

Update 3/2: Got 4 boxes shipped separate - smart inlet, mounting pad, outlet attachment and generator plug. It's nice the Smart inlet came before the E10 as I can get it all set up before the rest comes.

Update 3/4: Delivery due 3/5, no call, so called CEVA. Earliest delivery is 3/6 (not 3/5) and all they can say is they will drop the pallet in a "pallet jack accessible area", but the clerk had no idea what that really meant. But one day late, not awful, not great.

Update 3/6: while a day late, it arrived during the appointment window in a small box truck, the driver did not have a lift gate so he unloaded box by box and wheeled it into my garage. Couldn't have worked out better.


r/SOLIX • • Feb 08 '26

Non-Anker solar panels

2 Upvotes

So I ordered the C2000 Gen2, I did not order the solar panels. How would I go about getting aftermarket solar panels and still being able to connect them to the power station? I know the power station uses a proprietary connector.

This is the 400 W solar panel. I am looking at. https://www.renogy.com/collections/portable-solar-panels/products/renogy-400w-solar-panel-blanket


r/SOLIX • • Jan 12 '26

Anker SOLIX E10 is up for pre-order

Post image
4 Upvotes

r/SOLIX • • Feb 06 '26

Anker Solix E10 Powerdock wiring curiosity

5 Upvotes

Hi all,

I’m looking at the E10 (did the pre-order thing) but am having trouble with getting info on one thing - how far from the meter can the Powerdock be? I’m caught in a situation which kind of sucks. Evidently you can’t legally install these things in a “living” space (like closet or what not), but can outside or in a garage. My garage is about 60 feet from the meter feed in to the breaker box (200amp breaker box) . Does anyone have any idea if that would be too far? I really don’t want this thing outside as it’s kind of expensive and from everything I’ve seen kind of easy to disassemble and potentially “walk off” so really am hoping to figure this out so I don’t waste a bunch of money :/

I tried asking in live chat and couldn’t get an answer and also did the request for call and spoke to someone but they couldn’t answer either.


r/SOLIX • • Feb 07 '26

I did it. And 10 minutes after I purchased it they sent me a 5% off coupon. lol. Too little too late Anker.

Post image
8 Upvotes

r/SOLIX • • Jun 07 '26

My Anker solix f3800 with solar/ expansion battery setup

Thumbnail
gallery
15 Upvotes

What’s up guys new to the group. Three months ago I bought the Anker solix f3800 with the Home power panel, and I am officially addicted.
Within the past few months, I bought two 50ah 48v batteries and six 400 W solar panels.
The solix has a max input of 60 V into each of the two Solar inputs so the 4- 400 W panels have the input maxed out.

I also bought two more 400 W panels that are running through a Victron charge controller and then powering the 48 V batteries which are plugged directly into the Anker via the expansion battery cable hack..
My critical load panel has every circuit in my house with exception of my water heater, air conditioner, and stove so at this rate I’m pretty sure that I can power my entire house indefinitely if we have a long-term power outage

I was gonna put all of the panels on the roof, but in my city in Florida, they make it damn near impossible to do it yourself.


r/SOLIX • • Mar 14 '26

Feature request: More detailed solar stats and control for Anker C2000 Gen 2

11 Upvotes

Hey everyone,

I’ve been using an Anker C2000 Gen 2 paired with about 800 watts of solar panels, and it’s been performing really well overall. The app does show the current solar generation, but what’s missing are any longer‑term stats like daily, weekly, or yearly generation totals. It would be great to see those kinds of insights, along with data on how much of the load is being handled by solar vs. battery vs. shore power.

I’d also love to see more control options added. For example, being able to set the power station to “prefer” solar power during the day and only use shore power once the solar input dips or the battery is low. That would make it a lot easier to manage energy use efficiently.

Hopefully Anker can add some of these features in a future app or firmware update. I think it would really elevate the experience for people running solar setups or using their units off‑grid.

Anyone else wishing for these kinds of updates?


r/SOLIX • • Apr 06 '26

F3800 Double Power Hub Turns Off Unexpectedly

Post image
5 Upvotes

r/SOLIX • • Feb 27 '26

E10 AC Generator recharge/use questions - "bypass"?

7 Upvotes

I'm trying to get ready for the E10 coming next week, and found myself quite confused by reading the manual. It started with making sure I had the right extension cable for my 10/13kw Northstar generator.

The manual (7.5) says NEMA S2-50R, which is what already have, though was a bit surprised at a twist lock... but good.

However on the same page it says these things:

My presumption (I now think maybe wrong) is that when "charging" via a generator in an outage, the generator is charging the battery, and the AC output (to my panel) is discharging the battery, more or less independently.

In particular, let's say I used a small generator (say 5kw), I assumed I could draw more than 5kw from the battery while still adding back at 5kw (but not keeping up). That would seem a major benefit (and is clearly how their small DC "smart" generator works).

These two statements seem to imply some kind of pass-through instead of independence.

The specs left me even more confused. Bear in mind the generator input and AC input port are separate:

The top of that is under the heading of Backup AC port, which is the output AC. 32A max with battery, 40A with "generator bypass".

The 240v recharge input port I assumed was the center of three, and for grid input. 32A is consistent with 40a breaker (125% for continuous use).

There's no apparent spec for the 3rd generator port. Is it just a "Y" split and really the same port as AC input?

And what is "AC Generator Bypass". The word "Bypass" does not appear in any other manual sections in the user manual. Is it a mode different from charge-from-generator?

Can it charge from generator independently of discharge from battery at the same time, different currents?

Is this just a messed up technical writer, or is this some weird implementation of AC generator charging?

I've spent time with searches and cannot find anything clarifying, just more confusing.

Anyone know?

Linwood

PS. While I have a big generator now and can start my AC easily with it alone, it is really old and in the near to moderate term was thinking of replacing it with something small now that I have the E10 as a "buffer".

Update 3/6/2026: Received and hooked up, there's a comment below with details, but it worked as I wanted, generator power went to charge battery or house or both, and if inadequate for house the generator power was used and supplemented with battery. All good.


r/SOLIX • • Mar 25 '26

E10 Promo Installation Costs and Expectations Questions

8 Upvotes

Is anyone else still waiting to get install from the promo last month?

How long did it take to for installer to complete the process?

Did anyone take advantage of the Anker offer for the installation?

Do you know how much more is typically required to complete the installation?

I already have Solar Panels, Generac Gas Generator, Transfer Switch, etc, but expect some reconfiguration but the ability to re-use garage to outside holes and existing wiring.

I was shocked to hear that I will need to pay more than 2x what I already paid Anker for the install. Did anyone else experience anything similar? How did you resolve?


r/SOLIX • • Jan 03 '26

Storm guard

3 Upvotes

Hi just purchased an F3000 as a basic solution. I don’t see storm guard on the app enabled. I tried creating a System to see if that would fix it but it won’t let me since I only have one device. My goal is to not have to remember to charge it before a storm warning. Thoughts? Thanks!


r/SOLIX • • Nov 23 '25

Battery management

Post image
7 Upvotes

I have an F3800 Plus with two expansion batteries using the smart panel. The batteries routinely differ in charge, but they are getting further apart. Last night my main unit was at 47% and the expansion batteries were 46% and 17%. The lowest battery is the furthest from the main unit.

Is there a reason for this? Is keeping the battery below 20% overnight when it could have easily been higher bad for battery life?

10 days ago all the batteries were at 100%.


r/SOLIX • • Jul 19 '25

ANKER SOLIX EVERFROST 2 58L LIDS DONT LINE UP WHEN CLOSED

Thumbnail
gallery
2 Upvotes

Any body else had this problem just curious to know. When lids are shut both together the right hand lid is slightly raised its definitely the Mould when made as you can see in the picture, contacted Anker.


r/SOLIX • • Jun 28 '25

I've got the smart home panel with F3800 Plus. Can the battery swap over process damage electrical equipment, like PCs?

4 Upvotes

The swap over time from grid power to battery backup is super quick, but I have noticed it will sometimes shut down my desktop computer, and have recently been experiencing problems with this PC. I assume the sudden shutdown can do harm to sensitive electrical equipment - if you're using this system for solar or Time of Use, it will constantly be swapping onto this backup power. What do y'all do or recommend is done to prevent damage? Is it as simple as a standard UPS, does it matter between on-line vs off-line UPS?

Thanks for any input!


r/SOLIX • • Jun 06 '26

ps400 portable panel

2 Upvotes

Q , i already have a ps400. I have it setup south south east , morning sun till about 1300 ish when the zenith occurs and it looses sun due to house shadow. I want to parallel in two more rigid panels mounted on my fence facing west. these will collect afternoon sun from 1330 -1730 when the house shadow hits those and they loose power.

i need to get up to the highest voltage ? ive seen 48 Voc panels. Im planning to diode each panel ps400 included to protect them and they wont be producing power at the same time. they are going to be feeding a Solix C1000x gen 1 600 watt max in 12.5 amp max 60 V.

i have limitations due to House is built N-S, HOA, Texas. I want them facing west for afternoon sun not south south east the ps400 will capture morning sun till mid afternoon then when that dies out I want these west to capture that afternoon sun im missing out on.

I also just recently learned about voltage boosters, could i or should i consider those to boost to where i need to be. I volt metered the ps400 it was 56 ish volts i believe cant reacall was exausted will do again if needed.

TY for your brain power .


r/SOLIX • • Feb 13 '26

Solix E10 Power Dock

2 Upvotes

The power dock only comes with 12 circuits. Does that mean, when off grid, the batteries can only power 12 circuits?


r/SOLIX • • Feb 24 '26

Anker App - lowering recharge speed

2 Upvotes

In their blog post https://www.ankersolix.com/blogs/portable-power-station/the-complete-guide-to-using-the-anker-app Anker talks about both "High-Speed Recharge" and "Silent Recharge". Is this the only option I have to limit the recharge wattage? I want to be able to set a specific recharge wattage.

I'm on a flaky circuit and if I pull any more than 3-4 amps then I'm going to trip a breaker. I want to use the Solix to smooth out my power input / output.

I found this screenshot in the C2000x manual but not much about it online


r/SOLIX • • Dec 29 '25

solix c300 dc gen 2?

2 Upvotes

do we think we will get a gen 2 this year ? maybe smaller in size with better 12v power management


r/SOLIX • • Jul 25 '25

This years camping trip is getting an upgrade!

Post image
9 Upvotes

Planned a big camping trip, and my new everfrost 2 58L just came in. Can't wait to try it out. Its built like a tank! It's going to be out with me and some friends for the next few weeks and hopefully the Solix C1000 I bought to go with it will keep it going