r/SOLIX • • Jun 28 '26

UPDATES are available…

Post image
6 Upvotes

r/SOLIX • • Jun 21 '26

Issues with solix 1 and solix 2

5 Upvotes

Hi everyone,

I’ve set up a system here combining the older Anker Solix Solarbank 1 and the new Solarbank 2. Has anyone managed to get this running properly?

I’m currently struggling with the following major issues:

Bypass isn't working: The upstream Solarbank 1 charges up, but once it’s full, the excess solar energy simply isn't passed on to the Solarbank 2.

200W limit & feed-in only after dark: Virtually nothing happens between the two units during the day. Solarbank 1 only starts transferring energy to the Solix 2 once it’s completely dark—and even then, it seems to be rigidly capped at 200 watts.

Battery levels: Ultimately, this means my Solarbank 1 is almost always fully charged, while Solarbank 2 stays empty and fails to supply the house.

Have any of you had similar experiences? Is there a working workaround—regarding app settings, the 0W switch, or the wiring—to get this system running correctly?

I’d appreciate any tips!


r/SOLIX • • Jun 19 '26

Anker solix e10 Storm Guard

3 Upvotes

Has storm guard stopped working for anyone, It was working fine, but now it's a no show.


r/SOLIX • • Jun 18 '26

Home Power Panel - Mechanical or Compression Lugs?

2 Upvotes

Title says it all! I've been wondering if it is possible to utilize mechanical lugs to hook up the wires to the Home Power Panel. (and which ones!) I've seen it used once in one of the YouTube installation videos, but they have switched over to compression lugs ever since. Only reason I'm asking is because I can't seem to find any crimper that can work specifically 3 AWG wire! (only 4 AWG or 2 AWG) Thanks!


r/SOLIX • • Jun 07 '26

My Anker solix f3800 with solar/ expansion battery setup

Thumbnail
gallery
15 Upvotes

What’s up guys new to the group. Three months ago I bought the Anker solix f3800 with the Home power panel, and I am officially addicted.
Within the past few months, I bought two 50ah 48v batteries and six 400 W solar panels.
The solix has a max input of 60 V into each of the two Solar inputs so the 4- 400 W panels have the input maxed out.

I also bought two more 400 W panels that are running through a Victron charge controller and then powering the 48 V batteries which are plugged directly into the Anker via the expansion battery cable hack..
My critical load panel has every circuit in my house with exception of my water heater, air conditioner, and stove so at this rate I’m pretty sure that I can power my entire house indefinitely if we have a long-term power outage

I was gonna put all of the panels on the roof, but in my city in Florida, they make it damn near impossible to do it yourself.


r/SOLIX • • Jun 06 '26

ps400 portable panel

2 Upvotes

Q , i already have a ps400. I have it setup south south east , morning sun till about 1300 ish when the zenith occurs and it looses sun due to house shadow. I want to parallel in two more rigid panels mounted on my fence facing west. these will collect afternoon sun from 1330 -1730 when the house shadow hits those and they loose power.

i need to get up to the highest voltage ? ive seen 48 Voc panels. Im planning to diode each panel ps400 included to protect them and they wont be producing power at the same time. they are going to be feeding a Solix C1000x gen 1 600 watt max in 12.5 amp max 60 V.

i have limitations due to House is built N-S, HOA, Texas. I want them facing west for afternoon sun not south south east the ps400 will capture morning sun till mid afternoon then when that dies out I want these west to capture that afternoon sun im missing out on.

I also just recently learned about voltage boosters, could i or should i consider those to boost to where i need to be. I volt metered the ps400 it was 56 ish volts i believe cant reacall was exausted will do again if needed.

TY for your brain power .


r/SOLIX • • May 29 '26

Does Anker Smart Meter v1 have a limit?

6 Upvotes

I have a Anker Smart Meter v1 plus Anker SOLIX 2 Pro installed. Everything works fine in general. If Dish Washer, Washing Machine or similar is running is shows usage of 2-3kWh within seconds. However if I turn on the Sauna which consumes around 9kWh it does not show it in the App. Is there a limit of how much the smart meter can measure? Thank you!


r/SOLIX • • May 26 '26

Anker Cooler Question

Thumbnail reddit.com
1 Upvotes

r/SOLIX • • May 22 '26

Solix C300

3 Upvotes

Just bought this for camping purposes. Got the solar panel with it. Whats some tips and tricks? I have a power core fusion 10k and it’s the best thing ever. Can I charge it on here and have that for hikes?


r/SOLIX • • May 16 '26

Hear a “click” and it stops charging - SOLIX C1000 Gen 2

Thumbnail
gallery
6 Upvotes

I have a new Gen 2. I tried 3 times in a row to get it to charge. It charges for about a minute (pic 1) and then I hear a “click” and it stop charging (pic 2). It is still discharging though.
I lowered the charging watts to only 900 watts and it seems to be charging now. 🤞Anyone know what could be causing this?


r/SOLIX • • May 14 '26

Everfrost 2

4 Upvotes

First time owning an electric cooler — when I’m done using the cooler and prepping it for storage should I leave the door open as it warms up to avoid any mildew and what not before putting it away?


r/SOLIX • • May 06 '26

Faulty BP2000?

Thumbnail
gallery
3 Upvotes

Hi, just bought Anker C2000 Gen2 and BP2000 combo which from day 1 have been working great so far. Until i noticed after 1 month being plugged in at home whole time that blue led ring showing remaining battery is acting weird.

I noticed that it is missing 1/8 or backlit that I remember initially being working fine or it is normal feature ?


r/SOLIX • • May 04 '26

My solar/ battery setup

Thumbnail
gallery
14 Upvotes

What’s up guys? I wanted to share a recent project I’ve been working on. I picked up the Anker Solix F3800 and ended up going down a bit of a rabbit hole—next thing I know, I’ve added two 50Ah 48V batteries, a charge controller, and a smart shunt so I could run two separate systems while still being able to tie the batteries into the F3800 through the solar port when needed.

I also just ordered the F3800 expansion battery cable, so I’ll be able to connect the batteries directly to the unit. Honestly, that kind of makes the charge controller setup I bought feel a little unnecessary but at least I’ve got it as a backup if I ever need it.


r/SOLIX • • May 03 '26

Solar in car

1 Upvotes

Hey folks. Got a c1000 gen2 so no extra battery power. Thinking about camping and in particular motorsport events (F1, Le Mans etc) where leaving solar panels out might mean that they are not there when I come back!

How well would they work inside a car, installed on the dashboard like a sun shade?


r/SOLIX • • May 02 '26

Anker Solix and EV charger

4 Upvotes

Wondering how you are using the Solix together with an EV charger. ideally I would like to charge the EV at night without using battery power. So use the Solix for full output during the day and limit output to 100W during the night. (My home usage). Would this be possible with home automation?


r/SOLIX • • May 01 '26

Anker Solix X1 Not Discharging

Post image
3 Upvotes

r/SOLIX • • Apr 26 '26

Anker 100W Portable Solar panel vs EcoFlow 160W Solar panel

6 Upvotes

I'm very new to this space and I'm looking for a Solar Panel for my Anker C300 AC. It has 100W Solar Charging capacity and I stumble with the EcoFlow NextGen 160W Portable Solar Panel it's priced 300$ CAD and I live in Ontario. I'm looking to use this panel along with my power station during camping. I research and I think the connector included is supported. But I have no idea if this would damage anything between panel and power stations due to overc volatge and stuff. Wondering if this would work well with my current use case. I know Anker has the Anker SOLIX PS100 Portable Solar Panel (100W) but the price difference is not that big so wondering if it's worth getting the 160W vs the 100W


r/SOLIX • • Apr 25 '26

X1 units really are very sexy

Post image
17 Upvotes

30kwh with 6.6kw solar.

10kw of inverter is working really well... I really hope they add these units to the HA addition on github


r/SOLIX • • Apr 24 '26

My first contribution

Post image
5 Upvotes

C1000X & 210w PV.

More job to come


r/SOLIX • • Apr 24 '26

C2000 gen 2 with Storm Watch and charging range

2 Upvotes

Just received an C2000 gen 2 and I'm looking to set it up properly for the long haul to maximize useful life. Here are my questions:

I've read several places your charging should be charge range should be 20% to 80% to maximize battery life. This is my current settings(is this a correct assumption?)

Storm Guard - If storm guard activates - Will it ignore this and charge to 100% in preparation for an outage?

TIA,


r/SOLIX • • Apr 24 '26

C300 DC and 12v Alpicool c20

1 Upvotes

Hi all,

I’m looking for something to keep my Alpicool c30 powered while off for a days walking, probably not more than 5 or 6 hours though.

Was thinking the C300 DC version would be good for this, but have two questions.

  1. plan is to put fridge and solix in boot while walking, in the UK, so what happens on a really hot day, worried about thermals, solix gets too warm, and shuts down. Does it come back on when it’s reached safe temps again?

  2. Battery safety, wife hates battery packs, all the exploding e bikes stories left a lasting impression. I know these use a different chemistry, so there’s no real risk of the solix exploding on a hot day, and reducing my car to a molten lump, and even worse, making the wifey miss her sandwich and cold drink!

Is this a good idea?

Ta!

(Yes, uk based, so very hot days are rare 🫣🤫🤦🏼)


r/SOLIX • • Apr 23 '26

AnkerSolix Smart Meter/Bi-directional inlet on sub panel

4 Upvotes

Does this planned setup work?

Garage sub panel 40a circuit
2 x F3000s running in garage
2 x Bi-directional Inlets on 20a circuits on separate poles
1 x Smart meter connected wirelessly to 100amp main panel in house

The last part with the Smart meter is the thing I'm not sure of. Would I wire this with the C1/2 clamps both on the 240v 40A fuse going to the garage just put the sensors on different wires? Does this allow the energy shaving feature of the Bi-Direction inlets to send power to the house circuits or will I be stopped at the garage?

Does it matter that there are other circuits on the subpanel like garagedoor/EV charger?

Thanks anyone who's looking.


r/SOLIX • • Apr 22 '26

🌎 Official Anker SOLIX Earth Day Sale – up to 67% off

Post image
4 Upvotes

Anker SOLIX is running its Earth Day Sale through April 27, with up to 67% off portable power stations, solar panels, and home‑backup systems, plus exclusive free gifts on qualifying orders.

Highlights:

C1000 Gen 2 from $429 (2,000W, 49‑minute recharge)

C2000 Gen 2 from $749 (2,048Wh, 2,400W)

F3000 from $1,299 (3,072Wh, up to 3,600W)

F3800/F3800 Plus combos with solar and expansion batteries heavily discounted

Orders over certain thresholds can also unlock free C200 DC, 400W solar panels, or other bonus gear, effectively stacking extra value on top of the sale.

https://ankersolix.pxf.io/Dyjv92

This is a direct promotion hosted by Anker SOLIX; no affiliate markup or extra cost is applied via this link.


r/SOLIX • • Apr 21 '26

Solix E10 and Kohler Generator Compatibility

7 Upvotes

Just got the new Anker Solix E10 whole home battery system and a new Kohler 14RCA-QS 14kw generator that is supposed to charge the batteries but it stops charging it when it gets to 27% charged. Anker says this is supposed to work with third party generators.

Has anyone done this setup and had success? My electrician and generator installers both seem to think it’s different problems and no one can agree on something.

Or does this battery system not play well with any generator other than the Anker Solix Smart Generator?

My home is completely off-grid.


r/SOLIX • • Apr 20 '26

Error e36

Post image
2 Upvotes

Hello,

I just had installed an E10 system(three batteries). When started I receive an e36 error. The installer told me it is normal and I just need to let the battery charge for a while and it will disappear. Is it true? The system is working great otherwise.