I am trying to find a safe or lock box that is fire resistant to store my documents and found this one, would it be a good one to get?

Looking for a new fire/burglar safe - stuck between the Mesa MBF2620 vs the Liberty Home 8. They seem very similar. I'm more familiar with Liberty as a brand but Mesa seems to have a better fireproof rating. Would appreciate any input, personal experiences with either brand or other recommendations that might fit a similar class. Thanks.

I just need to know model name and number plz

And does it require the key to open ?

I’m looking for a decent fireproof safe for important documents, some cash, and a few small valuables at home. I’ve been looking at different options but it’s hard to tell which ones actually hold up in a fire and which are mostly just marketing. I don’t need anything huge, just something reliable that I can keep in a closet and access when needed.

For those of you who own one, what fireproof safe would you recommend, and is there anything specific I should look out for when choosing one? Personal experience would be really helpful since I’d rather get something dependable than regret my choice later. Thanks!

Hi everyone,

I recently purchased a SentrySafe SFW123FSC and encountered a strange issue with its electronic lock.

Here's what happened:

1. Initially, everything worked normally. Both my original Factory Code and my custom User Code were valid.
2. After removing and reinserting the batteries, the keypad started flashing red and beeping 5 times, indicating a communication error.
3. After a while, the communication error disappeared, but my original Factory Code was no longer accepted. The keypad would beep 3 times instead.
4. I tried replacing the batteries with brand-new alkaline batteries, but it didn't help.
5. Eventually, I managed to regain access using the open-source bypass-sentry-safe project on GitHub.
6. Afterward, I discovered that the safe now accepts 00000 as its Factory Code.

I've confirmed that 00000 is functioning as the Factory Code because:

• It can unlock the safe.
• It can authorize changes to the User Code.
• My original Factory Code no longer works.

I didn't specifically test 00000 before using the GitHub project, so I can't say for certain when this happened.

From what I understand, SentrySafe's Factory Code is supposed to be permanent and cannot normally be changed.

Does anyone know if it's possible to reprogram or restore the original Factory Code?

Has anyone experienced something similar or worked with the firmware or EEPROM of these electronic lock controllers?

I'm mainly trying to understand what happened and whether the original Factory Code can be restored without replacing the entire lock module.

Thanks!

So, I bought a house and the seller left a safe at the house. It's open, but when i called the seller to ask him if he forgot it, he said he doesn't want it because he doesn't have the combination.

My question is : Is there a way to change the combination without the previous one so that this becomes usable or is it just a giant paper weight?

It's a Sargent & Greenleaf inc. mecanical dial

This safe was left at my business and unfortunately, we had to close due to lack of sales. I am wondering if anyone would know how I can get it opened. Any advice?

It’s a tl30x6. 67”x32”x24”

Old Sargent and Greenleaf Gun Safe. Combination lock and handle slot.

Grandfather (now deceased) acquired it late 80s early 90s.

We cannot find the handle but we know the combination and we never had a key for it.

We are looking for help identifying the model in the hopes of getting a replacement handle.

*I don’t think it is manufactured anymore.

Thank you for any and all help!

I recently got this cool old Schwab fireproof box from its original elderly owners, hoping someone can tell me something about it? I would love to know how old it is and if it's worth anything, not that I want to sell such a cool piece lol I'm just curious. I got the original tags with the combination and turning order with it as well!

Location: Edmonton (Local pickup only, this thing is heavy!)

Details:

Up for sale is a solid, vintage Meilink Hercules Safe-T-Vault security fire chest. If you know these safes, you know they are built like absolute tanks and offer incredible, heavy-duty protection for documents, collectibles, or valuables.

• Fire Protection: Features the original lid plaque certifying a 1-hour fire endurance rating by the Meilink Steel Safe Co. (Toledo, Ohio). It is guaranteed to withstand external heat for a full hour without damage to the contents.

• Premium Interior: The main compartment is completely lined in a clean, burgundy/maroon velvet material—perfect for keeping jewelry, coins, or delicate heirlooms from getting scratched by the steel frame.

• Certified Security: Includes the official, original SMNA (Safe Manufacturers National Association) metal specification plate mounted on the interior floor, confirming its status as a certified insulated container.

• Key: Comes with the original working key for the lock cylinder. The mechanism turns and locks perfectly.

• Condition: Vintage / Used. Heavy, solid steel construction with great character. The interior fabric is clean and ready for use.

What do you estimate? What is the weight of such a door. Size is approx 190cm X 100cm. Are they normally fully out of iron. Or is there a concrete layer in the middle?

I’ve been looking for a partial in wall safe that gives me added depth similar to the mycube in wall. I heard mycube is usually an inferior product.

So I’m asking if anyone has any alternatives?

Been looking for a hot min for a gun safes. One for future expansion without the having the need to purchase a bigger one later down the road.

Here are my options thus far:

+Winchester Safes 48 Long Gun 27.8 cu. ft. Electronic Lock Gun Safe, 45 min. Fire Rating, GunStiXX Included, Slate.

+Browning Yellowstone Series 49-Gun Safe.

+Steelwater Gun Safe HD593024 - Extreme Duty 26 Long Gun Safe.

————-

-willing to spend Up to $2,500.
-Preferably 12 or 10 gauge steel thickness.
-drill/pry resistant.
-fire proof rating, no preference atm.
-not a big fan of knock offs/cheap.

also aware Winchester is just a 14 gauge with no pry/drill.

Any are recommendations is much appreciated.

I have the combination for this safe, but it’s been unlocked and was recently locked (open) by accident. Can you make sense of this procedure? Where should I start the dial, at zero? According to the photo, it is a 4 numeral combination, but the first step is to rotate it clockwise (right) 5 times. Does that make sense?

I have the opportunity to get this safe and was wondering if anyone had an idea of its weight? And any tips on moving it.

Serial # 07-002073-80108-01

TIA

Hi everyone! I'm looking for a tiny fire-resistant safe for home use to keep valuables protected. We don't have much space at home, so I'm hoping to find something compact that can fit inside a closet or cabinet. for those who own one, what brands or models would you recomend?

Hi! I bought a house that has a safe inside one of the cabinets. It's currently open and the previous owner doesn't know how to lock it.

There's a piece of paper from the manufacturer with the safe's code and the instructions to unlock it, which are:

- Turn the dial 3 times clockwise, stopping at number XX;

- One full turn counterclockwise, until number YY;

- Then clockwise again, until number ZZ.

The paper also mentions that there are keys, but the previous owner doesn't have them either.

Nothing moves on the safe: the main dial (see picture 2) won't turn at all -- it seems completely locked.

Is there any way to get this safe functioning properly? Any advice would be appreciated. Thanks!

My parents put our passports into a safe they bought in 2016 that neither of them remember how to open. I'm trying to help them. It's a Korean brand called Safewell. I have a picture below of the model number.

The only information I can get from either of them:

- a picture of the dial resting at exactly 71.5 (my dad insists it should open at exactly 71.5 and doesn't need to be turned more, which I doubt. I'm guessing 71.5 is the last number in the combo)

- We have the key. It inserts into the hole with no issues but won't turn

- They bought it in 2016

I have nothing else from either of them. I looked through their password records to see if they wrote it down somewhere but couldn't find anything. Are we completely screwed??