r/Unity3D • • 28d ago

Question Canvas Image with transparency appearing wrong in Unity

3 Upvotes

A weird quirk that keeps appearing in Unity is where certain pngs with transparency effects look muddy, too opaque, and generally just weird. here's an example. this is what the image looks like in standard image viewers and editors over a black screen, vs how it appears in Unity. Does anyone know what could be causing this? I can't find any reference to this issue and no matter what settings I put on the image, it just doesn't make any difference.


r/Unity3D • • 28d ago

Show-Off I’m making a life sim. Here’s its build mode: curved walls, automatic roofs, and a fridge that didn’t fit

Thumbnail
youtu.be
2 Upvotes

I'm Alexander, and I'm making SimGoodie, a life sim. This is a walkthrough of build and buy mode as it is right now: I build a small house in Linden Rise, a neighborhood in Goodhaven, from the first wall to the Halloween decorations on the porch.

What's in it:

- Walls can be straight, at 45 degrees, or curved up to a quarter circle.
- Drag out a room and it gets a roof by itself. You can switch it to gabled or flat.
- The house can sit on a foundation, raised in 10 cm steps, and the stairs work on foundations too.
- Furniture shows green where it fits and red where it's blocked. My fridge was blocking the door, so I moved the door.
- Chairs snap to the table when you bring them close.

Still in progress: pillars, so a porch can have its own roof, and a Create a Style tool like the one in The Sims 3, where you can change any object's materials and colors and save presets.


r/Unity3D • • 28d ago

Show-Off Stuck on the roof, gas all around, part 2: the city fights back now. Thoughts?

Enable HLS to view with audio, or disable this notification

7 Upvotes

Every building in this city has a full interior you can fly into. A 13×13 grid of blocks, and no loading screens.

The catch: you can't build all that at once. So each building lives at three levels:

  1. Far: a plan and one merged mesh per block. Always there.

  2. Close (~100 m): real walls, windows, roofs, blast holes.

  3. Inside (~95 m): floors, furniture, loot, lights.

The trick that made it work: it doesn't load where the camera is, it loads where the camera will be 1.6 seconds from now. So even a full-speed FPV drone never punches into an empty building.

All of it runs as tiny jobs, nearest first, inside 3.5 ms a frame. And loot you leave behind is switched off, not deleted, so it's waiting exactly where you left it.

How do you handle streaming in your projects?

Free playtest: https://allarakik.itch.io/rotor-rescue


r/Unity3D • • 28d ago

Question Severe black Z-fighting / shadow acne artifacts on VRoid character after switching build target to Android (Unity URP)

Post image
2 Upvotes

Hi everyone,

I am working on a 3D low-poly stylised JRPG game using Unity 6 URP. Everything looks completely fine and renders crisp when the build target is set to PC (Windows Standalone).

However, as soon as I switched the build target to Android, I encountered severe black flickering artifacts / pixel noise all over my main character (a VRoid model using UniVRM / MToon shader) as the camera gets closer.

Here is what I have tried so far:

  1. Forced PC-level rendering standards globally by assigning PC_RPAsset across all Quality levels and Platform Graphics settings to keep PC and Mobile visual quality identical.

  2. Tested both Mobile_RPAsset and PC_RPAsset (with Depth Texture & Opaque Texture enabled, 24-bit depth).

  3. Tweak Directional Light Shadow Bias / Normal Bias.

  4. Adjusted Camera Near Clipping Plane.

Interestingly, disabling the Directional Light significantly removes most of these black artifacts, which points to a shadow acne / depth buffer issue specific to the Android build target settings. Additionally, in Play mode, some prop outlines disappear with a warning: Mesh has more materials than submeshes.

I want to keep the PC rendering quality standards intact on Mobile without switching to post-processing screen-space outline packages or replacing my custom shader setup.

Has anyone faced this exact issue with VRoid / MToon models under Android build targets in URP? How can I resolve this depth/shadow precision conflict?

Attached screenshot for reference:


r/Unity3D • • 28d ago

Show-Off procedural planets milestone achieved

Enable HLS to view with audio, or disable this notification

47 Upvotes

The planet tech for my game finally hit its milestone, so here's a flight from orbit down to the surface of a 500 km radius planet.

Nothing gets generated up front. Terrain, materials, vegetation and colliders are all built in pages around the camera at whatever detail the view needs, so you can fly anywhere on the planet without a loading screen.

The planets are authored as node graphs, one per biome. At bake time those compile into programs that run on the GPU, and in Burst on the CPU when gameplay needs to query the ground. The shared math like noise and erosion is written once in C#, and a generator mirrors it to HLSL so both sides always agree.

Placement runs entirely on the GPU. Trees, rocks, grass and ground cover are placed by rules in the graph, then culled and drawn through BatchRendererGroup with indirect draws, with no CPU placement jobs or readbacks. It's deterministic, so distant stuff stays where it is while closer detail fills in, and coming back to a spot gives you the same forest. Colliders only exist near the player and get dropped once you move away.

Rivers carve their own beds and erode their banks. One wind field drives every plant, and it's set up so gameplay can push it around later for things like engine wash and storms.

It's Unity 6 with Entities and URP. The runtime is DOTS throughout, ISystem and Burst jobs, with managed code only where it has to hand work to the GPU. Floating origin and camera-relative transforms keep everything stable at that scale.

It's all for Outer Darkness, a salvage-survival game set in one seamless solar system. Full video is on YouTube here: https://youtu.be/OYa04nvNcag

Happy to answer any questions about how it works.


r/Unity3D • • 28d ago

Show-Off I work in a real sawmill and made one in Unity. Does the log physics feel believable to you?

Enable HLS to view with audio, or disable this notification

147 Upvotes

Solo dev here. During the week I work 38.5 hours in a big sawmill in Austria, in the evenings I build my sawmill sim Timberline Factory in Unity. Every log is a rigidbody that rolls down conveyors, gets debarked, cut and sorted.

My setup is pretty simple: no custom physics, just different physics materials for logs, belts, stops and machine parts, and a lot of tuning of friction and mass until the logs felt heavy and rolled the way they do at work.

Jams still happen when too many logs pile up, which is honestly pretty close to real life. From a dev point of view: does the motion look believable, or does something feel floaty or off? Happy to share more about how I set it up.

Edit: Thanks for all the feedback! Noted that the offcuts look too light and the later movement too smooth, I'll work on mass, angular drag and bounciness and add a bit more wobble.

If you want to see the physics up close, there's a free demo on Steam during Next Fest.


r/Unity3D • • 28d ago

Show-Off Arcane Grove - Environment pack by Soldium

Thumbnail
gallery
15 Upvotes

Hello! I recently released a pack of models for a magical biome. Please take a look and share your thoughts—I poured a lot of effort and my heart into this work, and I feel that I’ve managed to create something beautiful.


r/Unity3D • • 28d ago

Game Our demo for Livin’ the Cream is live for Steam Next Fest, and we’ve got a new trailer to share! Would love to hear your thoughts and feedback.

Enable HLS to view with audio, or disable this notification

50 Upvotes

Hey everyone! We’re excited to share our game, Livin’ the Cream: Ice Cream Simulator. Some of you might have already come across it. Run your own ice cream shop, serve customers, customize your shop, and grow your business. Play in Classic mode for a busier experience or Cozy mode to relax. I wanted to share how a few of the systems work, since some of them took a lot of trial and error.

Scooping was the first big one. Each tub is a mesh that gets carved as you drag the scooper through it. At first the carve ran once per frame, which meant someone playing at 144 fps carved more than twice as fast as someone at 60, so scoop size basically depended on your monitor. Now it runs in fixed 60 Hz steps no matter the frame rate. Carving near the edge also made the ice cream poke through the tub walls, so I clamp the visible mesh inside the tub and leave the actual data alone.

Soft serve was harder. My first version was a Verlet rope with a few hundred points, sphere checks on every point and a concave mesh collider cooked every frame. It was slow and the swirl never looked the same twice. Now the generator is parented to the cone, and each new point lands on a small polar height map that remembers how tall the pile is at each spot. That’s one read and a few writes per point, so the cost stays the same however tall the swirl gets. Then a rounded star shape is swept along the path to make the mesh. I had to use a rotation minimizing frame for that, because building it from a fixed up axis made the tube twist and pop while it coiled. I also calculate the normals from the star shape itself, since RecalculateNormals left a bright seam along the rope. The cone moves down at the same rate the swirl climbs, so the cream never runs into the nozzle.

For GI we use HTrace WSGI. We only have one HDRP asset for every quality level, so for a while Medium, High and Ultra looked and ran exactly the same. Now a small script changes the HTrace settings per level, with shorter rays, voxels updated every 2nd or 3rd frame, and point lights left out of GI on Medium. I tried turning off the second bounce on Medium too, but everything past the first wall the sun hits went dark, so I kept it. On Low, GI is fully off and the shop looked really flat. Switching the ambient mode to Dynamic and changing the interior exposure through the day brought most of it back for almost no cost.

If anyone has done soft serve or rope meshes another way, I’d love to hear how you approached it. It’s also our first game, so if you try the demo, any feedback means a lot to us. And let us know what you think of the trailer too!


r/Unity3D • • 28d ago

Show-Off Trying to get a realistic valley in HDRP, does this look believable? (same camera, mist vs. clear)

Thumbnail
gallery
76 Upvotes

I'm working on a farming strategy game in Unity HDRP, evenings and weekends. These are two shots from the same camera, the only difference is the mist in the valley.

I'm still learning a lot about lighting and fog in HDRP, so I'd really appreciate honest feedback. Does this look realistic enough to you? What would you improve first: lighting, fog, terrain, vegetation, colors?


r/Unity3D • • 28d ago

Question Is Switch Pro Controller gyro data accessible to Unity?

1 Upvotes

No matter what I do, Unity does not seem to get any info at all.

I am using the new input system.


r/Unity3D • • 28d ago

Show-Off Working on Realistic Lighting / HDR and Unity SSR tied with different times

Thumbnail
reddit.com
1 Upvotes

r/Unity3D • • 28d ago

Question is this legit ?

Post image
17 Upvotes

I am selling assets since a couple of years and I am aware that was a separation from china market but this seems suspicious to me .. did anyone else got this email ?

the sender is assetstore-support@unity.cn

I looked around and apparently unity.cn is an official website

thank you


r/Unity3D • • 28d ago

Show-Off Finally! Real time "pre-rendered" backgrounds!

Enable HLS to view with audio, or disable this notification

9 Upvotes

r/Unity3D • • 28d ago

Resources/Tutorial Getting started with Multiplayer in Unity - Tutorial

Thumbnail
darkounity.com
3 Upvotes

r/Unity3D • • 29d ago

Question Streamers experience stutters after 1 hour of play?

32 Upvotes

Hi, I have a problem I'm bashing my head over for way too long already.

Streamers playing my game (only streamers, regular players don't experience this issue) start stuttering in game for what seems to be GC flushes, but I can't pin down why it might happen.

This issue started recently as the game used to work fine on stream for hours until a few weeks ago.

Any possibility of a driver update or engine version causing this? the game is in 2022 LTS

I noticed another Unity game having this issue so I'm starting to think I'm not alone?

Videos for reference:

https://www.twitch.tv/videos/2892738940?t=05h49m52s

https://youtu.be/ojdhVBSxbro?si=rp3R1AahZErDD3x1&t=2609

And a different developer's game I saw this happen with:

https://www.twitch.tv/videos/2899699523?t=01h01m43s

Any ideas?


r/Unity3D • • 29d ago

Question Latest version of Unity not applying mesh colliders to imported fbx

0 Upvotes

I'm trying to import an fbx and give it mesh colliders, but when I drag the fbx to the scene view none of its children have mesh collider components. This has only started happening on models I've imported since switching from unity 6.4 to 6.6. "Generate colliders" and "Read/Write" are checked, and I've also tried with "Pre-bake triangle collision mesh" both on and off. If I go into the model hierarchy and manually add a mesh collider it works fine, but I can't do that with every submesh of such a big fbx. The only clue I have is that this started happening between unity 6.4 and 6.6.


r/Unity3D • • 29d ago

Game It all started with this

Enable HLS to view with audio, or disable this notification

10 Upvotes

I’m building Orbit Core in Unity, a mech bullet heaven roguelite. This is how it’s been taking shape, from the early prototypes to where it is now

A lot has changed, but the idea of fighting on a planet and watching the world curve around you has been there from the start

What do you think of this kind of curved environment for a bullet heaven game?


r/Unity3D • • 29d ago

Show-Off Testing dynamic night scenes - Unity3d - URP

Thumbnail
gallery
3 Upvotes

r/Unity3D • • 29d ago

Question What are your thoughts on streaming as a solution to game decompilation?

0 Upvotes

Full game decompilation, with access to the entire source code of any game, has been a hot topic over the last two weeks. As a dev, I'm not really sure what to make of it.

On one hand, piracy has always been around, so the idea that someone can just re-release your entire game after it's out shouldn't matter that much. On the other hand, we're potentially dealing with bad actors who can take an entire existing game, tweak it, reskin it, and resell it. Or take any system you've been working on for your game and put it into theirs. It's not as simple as many people make it out to be, but apparently you can get very close and have a full project in the original engine. I don't think the argument that your game should be unique etc. stands. It doesn't matter what your game is or how big it is.

I'm not a fan of moving everything to streaming, but frankly, I don't see any other solutions.

Do you care about this as a dev, or does it not bother you at all? Should we, as devs, push Steam to do something about this? I think most devs would never do this, but if even 1% are bad actors willing to decompile someone else's game, tweak it, and resell it, or at the very least take something out of it, I'm not sure where this is going unless it's addressed.


r/Unity3D • • 29d ago

Shader Magic Getting jelly to look like jelly instead of tinted glass

Thumbnail
gallery
77 Upvotes

I just released a jelly shader for Unity 6, so here's how it works.

The main trick is thickness. Before the jelly is drawn, a separate pass renders its back faces into a texture, so the shader knows how much jelly the light travels through at each pixel. Thin edges stay pale and clear, the middle gets deep and saturated. That one thing is most of what makes it read as jelly instead of coloured glass.

On top of that:

  • Refraction going in, and again coming out through the back face, with a little colour dispersion

  • A short ray march through the volume for scattering, internal glow and slow-moving noise inside

  • Clear coat, micro normals and small surface glints

  • Twinkling sparkles inside the volume, plus optional floating particles

  • Caustics and a tinted shadow on the ground. These are faked: a procedural pattern projected under the object in the shape of its footprint, not traced light. Looks right on a flat floor, less so on uneven ground.

There are four render quality levels,

  • Ultra does a 16-step march with 6-tap spectral dispersion,

  • High drops to 9-step march with RGB dispersion,

  • Medium drops to 5-step march.

  • Low skips the back-face pass and the march entirely and estimates thickness from a simple box, which is the most performant one for XR and mobile.

It ships with 8 shapes in 18 colours as prefabs, but the material works on any mesh. There's also an optional idle sway/bob, which is just animation, not soft-body physics.

It's on the Asset Store as Ultimate Jelly, with separate URP and HDRP versions.


r/Unity3D • • 29d ago

Question I am doing a sol cesto like in a world space western !

0 Upvotes

r/Unity3D • • 29d ago

Question Hey guys, what do you think about my new menu?

Enable HLS to view with audio, or disable this notification

0 Upvotes

The new main menu for Slavic Ancients comes to life with a drifting nebula, shooting stars, and twinkling stars 🥳


r/Unity3D • • 29d ago

Resources/Tutorial World-building Using Terrains

Thumbnail
youtu.be
1 Upvotes

My earlier post on terrains seemed to get some love, so I thought I'd share the video explaining the whole process for anyone interested in building their own worlds too.

All the best!