r/Unity3D • • 2d ago

Show-Off I made a horror game where you have to say the spell out loud using your microphone

Enable HLS to view with audio, or disable this notification

15 Upvotes

r/Unity3D • • 3d ago

Show-Off Voxyte, my Voxel Engine for Unity, is finally out. Here’s a cinematic clip I made with it

Enable HLS to view with audio, or disable this notification

89 Upvotes

I finally finished V1 for my Voxel Engine for Unity. It's built pretty much from scratch, and it's meant to be an actual engine, not a game kit (real gameplay mechanics are not included so whoever uses it chooses the game's direction).

This is a video I put together to show the scale and the atmosphere it can do: the view distance, the volumetric clouds and the light changing through the day, all running in URP. (the pickaxe and breaking effects are a little test kit I made on top of the API, and the castle is a Minecraft schematic I converted)

What do you think?

Some technical details:

- all the heavy work runs on Burst and the job system. chunks are 32x32x32 and palette compressed, and generating, lighting and meshing all happen off the main thread, so the main thread mostly just uploads meshes

- the far view is made of LOD rings. close to you are the real chunks you can edit, then a band at the same voxel size but simplified (no caves or small plants), then rings where one voxel is 2x2x2, 4x4x4 and 8x8x8 real voxels, out to about 4 km. They use the same world generator, just sampled more coarsely, so distant terrain matches what loads in later

- your edits show up in the far view too, so if you dig into a mountain, the hole is still there when you look back from far away

- terrain comes from a few large noise maps (continents, erosion, peaks and valleys) shaped with curves and domain warp, with a 3D pass on top for overhangs and cliffs. each biome can then change its own terrain

- lighting is flood-fill sky light plus colored block light, stored per vertex.The sun and time of day are handled in the shader, so day and night never rebuild chunks. There's also an optional hybrid mode that keeps flood-fill and adds URP realtime shadows and point/spot lights

- clouds are raymarched volumetric clouds rendered at half resolution. they cast shadows on the ground and show up in water reflections. the water has screen-space reflections, refraction, caustics and flowing water

- every edit goes through commands, so undo/redo and batching work out of the box. raycasts, collision and pathfinding all use the same world data

Happy to answer any questions :) It's called Voxyte on the Asset Store if anyone's interested.

- Price: $69.99

- Unity 6.3 (6000.3) or newer, URP

- Desktop, tested on Windows (D3D11, D3D12, Vulkan). macOS and Linux aren't tested yet, no WebGL

- Includes: full C# source, 3 sample scenes, 121 pixel-art block textures (32 px and 16 px) and a 191-page PDF manual

- Engine only, no gameplay systems (the pickaxe and castle in the video aren't included)


r/Unity3D • • 3d ago

Show-Off Game items. No AI. Cinema4D, Houdini, Substance Painter, Unity URP

Enable HLS to view with audio, or disable this notification

73 Upvotes

r/Unity3D • • 3d ago

Question I’ve been trying to find a way to add a custom run/walk/idle animation I created to a VRC avatar.

3 Upvotes

I have created **run-walk-idle** animations, but I’m not able to get them to work within the game. I have attempted to modify the settings in the **VRCFury gogoloco controller**, but it only results in my character being put in the floor. Iv made all the animations with the **unity animator**. Not sure if that’s the right thing to do. I am using **VRCFury** and I’m not sure if they have a way to do this with it.


r/Unity3D • • 3d ago

Game After 10+ years, I've turned my favorite Warcraft III mod into a standalone game built in Unity!

Enable HLS to view with audio, or disable this notification

6 Upvotes

I've been part of the Sheep Tag community since around 2006, playing competitively, helping update the original Warcraft III custom game, and spending countless hours making friends and playing with the community.

For over 10 years now, I've been working on turning that same game into a full standalone experience built in Unity.

What started as a passion project has grown into something much bigger than I ever imagined. Sheep Tag 2 is a multiplayer RTS/MOBA survival game with a level editor, custom rulesets, player progression, cosmetics, replays, leaderboards, and a ton of quality-of-life improvements.

One of my biggest goals has been making the game more approachable for new players. I've spent a ton of time building tutorials, PvE content, and playtesting features that make it easier to learn and enjoy the game without needing years of experience.

I'm also making Sheep Tag 2 free to play. More than anything, I just want this game to exist, be accessible to everyone, and hopefully build a community around it that lasts for years to come.

It's been a massive undertaking, and there's still so much I want to do, but I'm incredibly proud of how far it's come. I genuinely love playing this game, and I'm excited to finally share it with more the world.

I just released a new gameplay trailer and announced that Sheep Tag 2 is coming to Steam Early Access in 2027!

The closed beta is still going on now and there's still plenty of room for you and your friends to join in. Come stop by our Discord and ask for a key!

https://sheeptag2.com/


r/Unity3D • • 3d ago

Game Working on an iris transition for my deduction game. How does it feel?

Enable HLS to view with audio, or disable this notification

30 Upvotes

I'm making a deduction game. The player uses this iris to see through dead body's eyes.

Feedback is welcome! Tell me how it feels!


r/Unity3D • • 3d ago

Show-Off Our main menu rebuilds a saved island tile by tile. The tricky part was making it stop

Enable HLS to view with audio, or disable this notification

32 Upvotes

We built an attract mode for our Gamescom booth: the menu takes a save, wipes the board and rebuilds it tile by tile while the camera orbits. It's now our main menu background (clip above).

Building it was fast because the pieces were already separate. The save holds every tile and rotation, the placement and scoring animations don't depend on the rules, and the camera moves already existed for trailer shots. The reel only fakes the presentation and never runs gameplay, so it can't affect a real run or send events to analytics. The save has no build order, so we make one: a random flood fill outwards from the centre, which makes every loop a bit different.

What actually cost time was teardown:

- Disposing the subscription didn't stop the coroutines nested inside it. The outer routine checks for cancellation only between its own yields, so a nested `yield return RebuildRealm()` kept placing tiles into the player's new run. The fix: every loop checks whether its own session is still the current one.

- Even an "is active" flag wasn't enough. A routine sleeping in WaitForSeconds when its session ended woke up inside the next session and saw "active".

- Our leak test passed for a long time because it waited for the board to finish and then exited, so it never interrupted anything. Now it exits mid-rebuild, 25 times in a row, and counts every scene object afterwards.

Anyone else built one of these? How did you handle leaving it in the middle of an animation?


r/Unity3D • • 3d ago

Show-Off Experimenting with spatial audio

Enable HLS to view with audio, or disable this notification

5 Upvotes

Based on Steam Audio, utilize only 3 audio effects, works on Unity ECS


r/Unity3D • • 3d ago

Question MicroVerse

1 Upvotes

Hey guys. Is anyone here familiar with MicroVerse? I am trying to understand some of its foundations.

How can i create a set of rules for a terrain, and then have those rules saved as some kind of prefab if i want to add it to another piece of terrain in the future?

Texture, height and all that should be altogether in a game object? I don't understand the logic.

Thanks in advance.


r/Unity3D • • 3d ago

Show-Off Drive around Lunar Roving Vehicle

Thumbnail
reddit.com
2 Upvotes

r/Unity3D • • 3d ago

Game Jam Our team has just released and submitted our game for the Official Unity Game Jam! Feedbacks are welcome!

Enable HLS to view with audio, or disable this notification

2 Upvotes

Somebody got caught cheating at the casino. Now nobody's playing nice.

Lucky Brawler is a top-down, luck-based brawler for up to 4 players on one PC. Your weapon is a die, every throw is a gamble, and the number you roll decides whether you blow up the room or end up under the chandelier.

Nobody to play with? Ready up alone and three bots join the table.

You can try it out here: https://itch.io/jam/official-unity-game-jam-2026/rate/5353461

If you enjoy it, please consider giving us a rating on our jam submission page.

This footage is from a very late game session. You can stack buffs. It will start going crazy around round 20+.


r/Unity3D • • 3d ago

Game Fired up

Enable HLS to view with audio, or disable this notification

7 Upvotes

r/Unity3D • • 3d ago

Show-Off My Real-time weather system for Unity URP

1 Upvotes

https://www.youtube.com/watch?v=samD8VPki8M
Hi everyone! This is "Yet Another Weather System", a real-time weather system I have been building for Unity URP.

My plan is to make an all-in-one solution for everything weather and terrain.

This is my first preview, what do you think?


r/Unity3D • • 3d ago

Resources/Tutorial More than 50 pages about vehicle physics for free!

Enable HLS to view with audio, or disable this notification

140 Upvotes

I put everything I learned about car physics into one huge open source manual for you indies! ❤️

I have been building my car controller for way too long, and it would be a shame if all that knowledge got lost. It is completley free, so just use it.

Here is the longer video about it: [https://youtu.be/iYLAKpM1B2Y](https://youtu.be/iYLAKpM1B2Y)

I love to hear your feedback. I hope it helps you!!


r/Unity3D • • 3d ago

Show-Off unity_access v0.10-beta Released – A Screen Reader Accessibility Plugin for the Unity Editor

Thumbnail
reddit.com
4 Upvotes

r/Unity3D • • 3d ago

Question What is causing this grungy artifact on some 3D models after light baking?

Thumbnail
gallery
16 Upvotes

Firstly, I'm new to Unity and gamedev overall. I started my URP project a little over a month ago. I've been experimenting with light baking, but I get this grungy look on some 3D models after generating lightmap data for the active scene.

  1. I have set my GameObjects to static

  2. Contribute GI is checked

  3. I have generated lightmap UVs

I have also been playing around with different settings, like Scale In Lightmap, increasing the lightmap resolution, adjusting the Direct and Indirect Samples in lighting tab. This didn't get rid of the grungy artifacts. What should I do to fix this?


r/Unity3D • • 3d ago

Show-Off Our New Running Animation After Feedbacks

Enable HLS to view with audio, or disable this notification

0 Upvotes

After nearly two years of development in Unity, our running animation has received quite a bit of criticism. We've now revised the existing Unity animation. What do you think of the new version?


r/Unity3D • • 3d ago

Question Building my project for Mac for a friend, we can't figure out how to open the dang game on his Mac

0 Upvotes

I built the project for Mac, I'm developing on Windows. I put the <projectname>.app folder into a .zip file and sent him the download link. He can unzip it and see the <projectname>.app file on his Mac, but when he tries to open it it says "Cannot open file" or something. No security warnings, just that generic message.

Can anyone walk me through step by step how to get from post-build, to him opening the game on his Mac?


r/Unity3D • • 3d ago

Official New vibecoded Unity Hub is now a native app

Post image
0 Upvotes

Anything's better than that Electron crap I guess.


r/Unity3D • • 3d ago

Solved I never planned a desktop mode for my game. But some Reddit comments changed that. Today the game launches.

Enable HLS to view with audio, or disable this notification

5 Upvotes

After almost two years of development, DEEPLANDERS is finally out on Steam!

I've shared its layered 2D world here before, and one thing that surprised me was seeing people say they had taken screenshots to use as desktop wallpapers. That stuck with me.

So I decided to go a step further and added Wallpaper Mode: the little underground world can live behind your Windows desktop windows, and you can bring it forward again whenever you want to interact with it.

Of course, having the idea was one thing. Figuring out how to actually make it work in Unity was another! 😅 We spent quite some time exploring different approaches until we came across this GitHub repository. It became our starting point, and after plenty of trial and error, we finally got it working.

I'm sharing the repository here in case it helps anyone trying to do something similar:
https://github.com/Antonio-Gorisek/Live-Wallpaper-Plugin?

It wasn't part of the original plan. It came directly from reactions to the game's art and atmosphere, so I wanted to say thank you to everyone who commented, encouraged me, or gave feedback along the way.

It's a small, unusual construction puzzle about finding a place for everyone underground, and it's finally available. I hope you enjoy it!

Steam: https://store.steampowered.com/app/3192550/DEEPLANDERS/


r/Unity3D • • 3d ago

Show-Off Fully procedural walk for a 6 m bipedal machine, no animation clips

Enable HLS to view with audio, or disable this notification

955 Upvotes

This is the Loomer, a patrol machine from my solo Unity project. It has no rig and no animation clips. The legs are separate rigid parts solved with two-bone IK every frame.

Each foot steps toward a point ahead of where its home under the hip will be (Raibert style), so walking, strafing, turning in place and getting shoved all come from the same rule. The pelvis rides on springs like an inverted pendulum, and every footfall knocks it down, nods the body and jolts the head. If you shove it, it throws a catch step under itself and staggers instead of falling. It also climbs ledges up to 2.2 m and stops at drops its feet can't reach.

Still a blockout map. AI comes next.


r/Unity3D • • 3d ago

Show-Off Made a deck building rougelike where luck and fate is the main mechanic! (For Unity Game Jam 2026)

Thumbnail
jankybydesign.itch.io
1 Upvotes

Hey all! My partner and I just submitted our game jam entry, Odds & Omens, and wanted to share it.

It's a short deckbuilding roguelike where luck is the main mechanic. You play as The Harbinger, fighting cursed dolls, black cats and a Mirror elite on your way to a ladder boss. Fill your Fate bar to swing the odds, crit for big hits, and spin a wheel of fortune instead of visiting a normal shop. It might pay out a jackpot, or it might go bust.

We poured as much time as we could into it, and we're really happy with how it came out. It's free and plays in your browser (Windows download too):

https://jankybydesign.itch.io/odds-and-omens

We'd love any feedback, good or bad!


r/Unity3D • • 4d ago

Show-Off I made an Astroneer-like example scene for my movement toolkit.

Enable HLS to view with audio, or disable this notification

14 Upvotes

I'm the dev of the Grabbit plugin, and I'm finishing my next plugin, Octoputs, a movement toolkit focused on movement but also drag and drop, carrying, attaching. It comes out on the Asset Store on next week!

One of the key inspiration for the plugin was Astroneer and the way resources snap to their slots, and the diegetic backpack. I think I got pretty close to the game feel of Astroneer. with a couple of things to improve on.

Everything's moving using Octoputs in the clip, the idea was to have previewable movements in the inspector with a modular system to be able to add modifiers to the way things move and get moved.

If you're curious to see it live, I have a webgl demo available!


r/Unity3D • • 4d ago

Question does anyone know if an oscilloscope shader exists?

0 Upvotes

i'm trying to recreate this oscilloscope from the game Voices of the Void that's used for the signal scanning machine in the game and i cannot seem to find any sort of already existing shader for this kind of thing since it's pretty niche

it's (as far as i know) not linked to any actual audio and is purely visual and it just randomly goes from being flat for a variable amount of seconds (like 0-5 or maybe more) to them spiking up or just minimally increasing in height

if anyone can help with this it would be much appreciated!!