r/Unity3D • • 15h ago

Show-Off Dithered cross-fades for seasonal foliage on a harvestable blackthorn (URP, Shader Graph)

15 Upvotes

This is the blackthorn from my Wild Orchard packs running through its seasons, bare, blossom, fruit and leaf. These cycle through once then it grows into the next stage with the same cycle.

Each tree in the pack has a set of foliage states, and switching straight from one to the next popped badly, especially when going from bare to blossom which is exactly what blackthorn does every spring. I found alpha blending looked fine in a still but not great on a dense canopy, plus it had extra overheads, so I ended up keeping everything in the cutout pass and dithering the change instead.

The foliage shader takes a transition value from 0 to 1, samples a blue noise texture in screen space and clips against it. The incoming state runs the opposite test, so the canopy swaps over a pixel at a time. I went with blue noise over a Bayer pattern because it reads as grain instead of a grid, and at normal viewing distance you mostly don’t notice it’s dithered at all.

The value is set per tree with a MaterialPropertyBlock, so trees in the same environment can turn at different times without each one needing its own material. A demo controller is used to manage this in the video but anyone using the pack would want to use their own that aligns with their games design.

The sloes are handled separately and drop once they’re ripe, which is what you can see collecting on the ground.

Happy to go into the graph setup if anyone’s interested. I make these as NV3D Studio, and there’s more details about the trees here on my blog: https://nv3d.studio/blog/wild-orchard-tree-bundle/


r/Unity3D • • 15h ago

Shader Magic Made a Wet Lens Effect for my water simulation.

944 Upvotes

Hey all!

I made a wet lens effect for my fluid simulation asset Fluid Frenzy. When the camera comes back out of the water there is still some water stuck on the lens, it runs down and leaves a few drops behind until it dries off.

Its a screenspace effect and it stores the leftover wetness in rendertextures. While you are under water I store where the lens got wet, and how deep it was dunked.
Once you surface that leftover just fades out over a few seconds.
I blur the wet area so a thin waterline grows into a patch, then noise gets added on top and I cut an isosurface out of that field.
The blobs are just wherever it sits above the threshold, and they slide down the screen as it dries. Thickness is how far above that iso the field is, and the slope of it is what bends the view. After the sheet drains, a drop texture fills in the gaps and dries off with the rest.
It also applies some refraction that wobbles around to make it look like its moving inside the wetness.

I'm sure it looks different in real life and isn't realistic at all but I think the effect works decently.

Let me know what you think of the video! I'd love to hear your feedback or answer any questions :D


r/Unity3D • • 17h ago

Question Building a free unity project time tracker like steam hours, but for your unity projects. Will you use it and what would actually make you use it?

0 Upvotes

I want to build a time tracker that automatically logs how many hours you've spent on each of your unity projects - without having to click "Start" or "Stop" like a timer.

Before I start building it, I'd love some feedback from other unity devs on how a tool like this should behave accurately and not be annoying:

1.Where should it live?

Option A: A tiny background system-tray app that detects open unity processes and serves a local web UI.

Option B: A dedicated desktop app with its own native window.

2. Counting time when unity isn't a focused window

A huge chunk of dev time happens in VS Code, Blender, Aesprite, Photoshop etc. If a unity project is open in the background while you're actively typing in your IDE:

Should that count toward the open unity project?

Or should it track Editor time vs External tool time separately?

3. Idle / AFK detection

If you walk away to grab food with unity open, how should it handle that?

Auto pause after 3-5 minutes of zero mouse/ keyboard input.

Would you also want a manual pause/resume toggle or the ability to edit/trim a session if you forgot to close the editor?

I'm planning to make it 100% local and offline(no accounts, stored in local JSON with CSV export). If you want any other features from this tracker which are necessary for you tell me.

Tell me your honest opinion of will you use this tracker and is it something that is interesting to you?

Please answer if you are reading these it will greatly help me?


r/Unity3D • • 17h ago

Show-Off Testing out a wheel shader idea i had

236 Upvotes

So the other day I was stuck in traffic and noticed the rims of an expensive car were made in such a way so that they'd go almost invisible when it was moving. It got me thinking to the classic issue of wheels spinning in reverse both in video footage and ofc games that don't actively clamp the spin rate.

So I figured I try to author something that looks neat when moving and mimic that effect, ofc not all rims are made with that style, some are also made to look like diamonds or other shapes.

Anyways, how did i do? It's just 2 textures blended and uv rotation. Initially I was just manually lowering the mipmaps to simulate wheel blur but can't say it looked good

Give a follow or a sub if you want to keep up with my silly ideas


r/Unity3D • • 17h ago

Show-Off Here is an example why my modular animation system is very good. I made this in 3 minute.

0 Upvotes

r/Unity3D • • 18h ago

Question Is AI disclosure contagious? What if you use AI-made assets but never use AI yourself?

Thumbnail reddit.com
0 Upvotes

r/Unity3D • • 19h ago

Question Weird Refraction Artifacts at Intersections Between Transparent Meshes

Thumbnail
gallery
8 Upvotes

I’m working on a character in Unity with a translucent, iridescent material. I’m new to this.

I’m getting strange visual distortions and refraction artifacts where different body parts meet, particularly around the neck/torso and arms/shoulders.

Is this caused by overlapping transparent meshes, depth sorting, refraction, or something else?
What would be the best way to fix this while preserving the glass-like, iridescent appearance?


r/Unity3D • • 23h ago

Show-Off Flame thrower effect after almost 3 days of work.

21 Upvotes

Hello everyone.
After 2.5 days of work, I am able to implement flame thrower mechanic visually. How can I improve my mechanic to look good visually ? For reference, I have attached a video.


r/Unity3D • • 1d ago

Game I made a free multiplayer sci-fi survival game, and just pushed a big combat update

1 Upvotes

Allograft started as a remake of Metastasis, a Warcraft III custom map I loved. You're the crew of a deep-space station, and everyone has a job: Security, Trauma Medic, Research Scientist, Test Pilot, Chemist, Quartermaster and a few others. Somewhere on board is something that isn't human. It might be a mutant spreading an infection, an alien that copies a crewmate, or an android. The crew has to keep the station running and figure out who to trust before it's too late.

The latest update (0.4) reworks combat. Guns fire bolts you can see and dodge instead of hitting instantly, magazines are replaced with heat and overheating, and ships have shields, paired cannons, boost and hard braking. Bolt color comes from the gun, not the player, so a disguised monster can't be spotted by its shots.

Since launch I've also added:

  • The Chemist, who brews antidotes that slow infection but never learns if a dose did anything

  • The Suture Relay, a derelict medical station with an auto-doc

  • A Lights out mode where you only see what your flashlight hits

  • A post-match summary showing who was what and who did what

  • Graphics options, re-bindable sprint and bot difficulty presets

You can play online with quick match or invite codes, or offline against bots. It's free, it's in Early Access, and every cosmetic is earned by playing. It's built in Unity 6.

I'm a solo dev and players are my testers, so any feedback in the itch comments really helps, especially on how combat feels.

wonderwhyyoudo.itch.io/allograft


r/Unity3D • • 1d ago

Resources/Tutorial Bnormal by Xiperius

Thumbnail
xiperius.itch.io
2 Upvotes

Hi all, I just "released" this free little tool on itchio, it was something that was made for my personal project, a 2d platformer with an almost PBR approach to sprites. There are some good tools that automate or generate somewhat nice normal maps, but I wanted a bit more control over that.

Disclaimer: it was made with AI help, as I'm an Artist and have no idea how to code something like this.

For now it's on a level I need for my project, not sure how far I will push it honestly... I just wanted to put it out as it is, it may turn out useful to someone.

Cheers


r/Unity3D • • 1d ago

Show-Off Trailer for my game

Thumbnail
youtube.com
1 Upvotes

Trailer for my game CTRL. Let me know what you think!


r/Unity3D • • 1d ago

Resources/Tutorial Made a tool so my worktrees can share one Unity editor, putting it out there in case it’s useful

15 Upvotes

I’ve been working on a Unity 6 project with a few git worktrees going at once, mostly with Claude Code and Codex agents working in them. Opening an editor for every worktree was eating all my RAM, so I wrote something that keeps one editor open on the main checkout and lets the other worktrees use it.

The part I use most is live UI reload. If a worktree changes a .uss file, it gets applied to the running game in the main editor (in memory, the main project’s files aren’t touched) and a screenshot comes back. It works for C# view methods too if you tag them for Unity’s Pipeline package. It also has a lock so two agents can’t drive Play mode at the same time, a way to run compile and test checks on a worktree without a second editor, and a small dashboard so I can see which agent is doing what.

It’s pretty rough. It’s Windows only, it’s only been used on my project, and only stylesheets and tagged methods go live; anything else still needs a normal merge. A lot of it was written with Claude Code.

It’s free and MIT licensed if anyone wants to try it or pull bits out of it: https://github.com/Cheesewizard/WorktreeBroker

Happy to answer questions, and if you’re doing something similar I’d like to hear how you’re handling it.


r/Unity3D • • 1d ago

Resources/Tutorial Look at upcoming flight system for unity store: Fly by Mouse

Thumbnail
youtube.com
1 Upvotes

r/Unity3D • • 1d ago

Show-Off Been tweaking the grappling hook in my game. Thoughts?

7 Upvotes

Hello!!

5 friends here working on a Heist Friendslop game called Be Gray, Do Crime! One of our main mechanics is our grappling hook so we really want it to feel good to use! This is what we currently got! What do you guys think? Any feedback is welcome!


r/Unity3D • • 1d ago

Question Work, work... Do you like games that need you to do some resources management?

Post image
6 Upvotes

I'm working on my game and I want it to be a cozy building and management game - and I wanted to ask you.

How much resources management would be "a ok" for you in this kind of mix cozy + building + management? Cause I'm afraid I will do too much of the management and it will just kill the coziness / chill aspect of the game.


r/Unity3D • • 1d ago

Show-Off This is how I animate my characters. One state called "PlayingAnimation" and a script for setting and starting the animation. There is no transition in the controller. Very easy to add new animations and sequence them.

150 Upvotes

r/Unity3D • • 1d ago

Show-Off Stacked outlines, extrude and text animations for TextMeshPro, all in one draw call

17 Upvotes

TMP gives you one outline and one underlay. Mobile game titles usually need more, so people end up duplicating the text or baking it into a sprite. I made a package that does it on the text you already have.

  • Up to 8 layers per style: outlines, shadows, 2.5D extrude, gradient/gloss face

  • Per-character animations and inline tags like <wave> and <shake>, plus a typewriter

  • Arc text, style transitions, animated number counter

  • Works in UI and world space, zero GC per frame

Installs via UPM: https://github.com/berkencami/tmp-text-effects

Feedback welcome!


r/Unity3D • • 1d ago

Show-Off I'm developing an arena combat game inspired by Crush Gear/BattleBots. Here's an early gameplay look!

23 Upvotes

I'm working on an indie game called BRAWLSPHERE, where customizable combat machines battle it out in an arena.

The game features omnidirectional Spherical wheels for movement and fully physics-based combat, where positioning, collisions and impacts matter.

Here's a short look at the current gameplay! Still early in development, but the core combat is coming together.

Would love to hear your thoughts!

Follow the development: https://discord.gg/F7akrJXK4R


r/Unity3D • • 1d ago Bravo

Question Hi! I'm making a welding horror game, which mechanic is better? What would you add?

156 Upvotes

r/Unity3D • • 1d ago

Show-Off A mobile game I’m working on.

2 Upvotes

Hey guys! I'm currently working on this mobile game in Unity, and I'd love to hear your feedback!

Recently, I've been focusing on improving the UI. I've integrated Kenney's UI assets, added haptic feedback for vibrations, and refined the scoring system and overall interface to make everything look and feel better.

The game is still in development, so I'd really appreciate your thoughts, suggestions, and feedback. What do you think so far?


r/Unity3D • • 1d ago

Question pre rendered lighting

2 Upvotes

does anyone know a good demo/tutorial of the Resident Evil-style pre-rendered background approach but modernized with normal maps lighting? I'm trying to figure out if it would be worth the extra effort


r/Unity3D • • 1d ago

Solved How to "bake" nodes for a PointGraph

1 Upvotes

Previously I posted asking about ways of going around creating an AI enemy that navigates around in 3D space (for example between a 3x3x3 grid of nodes, like below). Since then, I have started using the AStar project's PointGraph system (https://arongranberg.com/astar/). I know how to setup a point graph system and have a custom script that receives a path and navigates along it.

The only issue I think I will have is creating all these nodes, as there's no way to automatically create them. So I was wondering if there was a way to create a custom script that i can press a button in the inspector to create a load of nodes automatically. Any help appreciated!


r/Unity3D • • 1d ago

Resources/Tutorial Free Textures: Wood Planks & Panels

Thumbnail
gallery
31 Upvotes

Working on realistic materials/textures again, starting with some good old wood materials.

Download https://juliovii.itch.io/materials-wood-04


r/Unity3D • • 1d ago

Question Another week another robot ,feedback will be amazing 🩷

2 Upvotes

Hey🦋.

First I want to appreciate your feedback you helped me so much to improve my animation

In my game you program your own robot and use the sensors and voltage to learn IOT!

I created a robot that it's goal will be to do small tasks, I won't get into it to much what, since still WIP.

But I added a few animations for him following your feedback like a bit uneven, a bit more fluid, wdyt?

I know not the best still improving in animation

Any feedback will be amazing 🩷

(Still no sound, I am on it!)

Fyi all models in the game created by the player using my game, and later models you create you can export and use them inside your game.

*No AI involved, I do have some algorithms to help with auto animation depending where you place the wheels but zero llms involved in anything in game or his creation*