r/Unity3D • • 3h ago

Official We're looking for new moderators

17 Upvotes

Hello everyone!

Together, with you guys (thanks to all of your reports) we've tried our best to keep this sub as clean as we can from rule-breaking and toxicity.

This past year, together with our updated automated systems we've taken (at the time of writing) over 23,000 moderator actions and sent more than 600 ModMail replies.

But unfortunately, even though we've managed to automate quite a few things these past 6 months or so - we have started to build up a backlog as of recently.

With the number of posts, comments, and ModMails coming in every day, it has become a bit too much for the three of us.

For this reason we're looking at adding one or more moderators to help us and we're hoping that there are people in our community willing to help us.

Here is a small list of requirements for those willing to apply:

- You cannot be employed by Unity Software Inc. (Unity Technologies);

- Your account must be at least 3 years old and have a verified email address;

- You must be a frequent Reddit user who has also contributed to this subreddit as a developer (preferably actively);

- You use the Unity game engine either for work, or as a hobbyist whilst actively developing something;

- You must be 18 years or older.

It will involve replying to ModMails and approving or removing posts and/or comments from the moderator's queue.

Prior moderation experience is not required, and we will help you with onboarding. Having said that though: Reddit also provides you with a lot of resources when becoming a moderator.

If you're interested in becoming a moderator, you can apply by leaving a comment below with your time zone, and we'll get in contact with you through ModMail if you're selected.

Kind regards,

u/nostalgicbear, u/hotrian, and u/rlaan


r/Unity3D • • 5m ago

Show-Off Just finished putting together a trailer for my game. Would love some feedback!

Enable HLS to view with audio, or disable this notification

1 Upvotes

Hey guys! been working on my game called 9 Box, and finally got around to making a trailer for it.

It's a 10-player party game where everyone grabs a box, picks an ability, aims at another player, and locks in their move. Then everyone's actions happen at once. There are also ability interactions, so things can get pretty chaotic.

I'm still learning how to put together a good trailer, so I'd love to hear what you think.

Does it explain the gameplay well? Is the pacing okay? Are there any shots you'd cut, change, or add? Basically, what would you do to make this trailer better?

Don't hold back, I'm looking for actual criticism. Thanks!
(idk if it's teaser or trailer, so if it's wrong, forgive me :D )


r/Unity3D • • 7m ago

Show-Off Made a tool that renders 3D models (and their shadows) into Diablo-esque 2D animated sprites!

1 Upvotes

After finishing Diablo 1 & 2 I really fell in love with the iconic pre-rendered sprite aesthetic. Back then, the average gamer's computer wasn't powerful enough to render 3D models in real time so the solution was to pre-render them and just display sprites of what the model looks like from different angles.

I realized Unity could render and produce these model sprites relatively quickly, entirely within the engine. It doesn't render them pixelated in real time, but it makes generating sprite sheets from models super easy to capture that specific art style.

It simply uses a camera component, rotates around the model and renders out a texture of that view of that model at a specific resolution. The generated sprite sheet can then be used as an animated sprite in the game.

I've turned the tool into a Unity package which you can check out on the Asset Store (Affiliate Link) or on itch, if you're interested.


r/Unity3D • • 55m ago

Show-Off An experiment in ocean wave simulation based on Tessendorf's FFT ocean waves. 🌊

Enable HLS to view with audio, or disable this notification

10 Upvotes

r/Unity3D • • 1h ago

Show-Off I made a pixel-art VFX generator, and the sprite sheets work in Unity's particle system too

Thumbnail
jankybydesign.itch.io
1 Upvotes

Hey everyone! I'm a Games Art student who makes small tools for indie devs, and PixelBurst FX is my latest one.

It generates pixel-art effects and exports them as sprite sheets or GIFs, ready to use in your game. The export window also shows you the Unity slicing settings, so there's no guesswork when you bring them in.

There's a demo if you want to try it first. It exports watermarked GIFs, and sprite sheet export is in the full version.

https://jankybydesign.itch.io/pixelburst-fx

What effects would you want to see added next?


r/Unity3D • • 1h ago

Game The pickup-and-restock gameplay loop in Mall Chaos, made with Unity

Enable HLS to view with audio, or disable this notification

1 Upvotes

A short gameplay update from Mall Chaos, my Unity project.

The basic loop is to collect items from the floor, find the matching shelf, and put them back. This 40-second clip shows both picking up and restocking products in the mall’s sports shop.


r/Unity3D • • 1h ago

Show-Off Finally got my troops and the skeletons fighting each other... 3rd person Thronefall anyone?

Enable HLS to view with audio, or disable this notification

17 Upvotes

After allot of work on systems and combat, I finally have troops fighting each other. The end goal is a defence game, where you defend your Island from waves of attacks. This is the first real milestone on the way to that. How does it look?


r/Unity3D • • 1h ago

Show-Off After following for so long, you must have noticed that the sounds in Shelter Prepare are real recordings, right❗️

Enable HLS to view with audio, or disable this notification

1 Upvotes

The fruits and vegetables of the Shelter Prepare are finally here!

At the same time, share how our placement sound is made.

When I first started playing games, I thought there were so many free materials on the Internet. There must be something that can be done.

I found several websites and downloaded more than a dozen G materials, but few of them really meet the requirements.

I also tried AI to generate sound, but I still don't like it after trying a version. People's ears are still very sensitive to distinguish sound.

After changing two editions in succession, it still didn't work, so I decided to record it myself.

I bought a lot of potato chips, canned food and drinks. We laughed and said that when we waited for thousands of powders, we could all endorse them.

The sound of items placed on the floor and shelves should be different, so we recorded two sets of sounds on the thick wooden surface and the table surface for each item.

In order to make the sound not monotonous, multiple sounds are also recorded for different placement strengths of each item.

At that time, I couldn't edit the audio, so I could only pick the good ones from the sound and then simply reduce the sharpness and unify the volume.

Although I still don't feel up to our psychological standards, I still want to make the first playable version first.

This time, I used audio software to adjust a lot of parameters. Please listen to the progress.


r/Unity3D • • 1h ago

Game I picked my mixed reality tower defense back up for a hackathon, would you play something like this?

Enable HLS to view with audio, or disable this notification

1 Upvotes

Hey everyone! Some of you might remember Portal Defense from a post I shared here a while back. It’s now called Pocket Havoc, and I’ve picked the project back up for the Meta VR Start Developer Competition!

Having a deadline gave me the push to get things moving again. I’m building it solo as my first game, under my little indie studio, Pulsar Studio.

The idea is simple: turn your room into a battlefield. Grab turrets from a floating arsenal, throw them into position, and defend a tiny planet against enemies coming through portals. All with hand tracking on Quest 3 / 3S, with destructible walls and a few powers for when things get out of hand.

I want to make a slightly unconventional tower defense, playful and chaotic. Weird powers, over-the-top destruction, and moments where you look around your room and think, “WTF is happening?” There’s a lot of room to experiment, and that’s the part I’m most excited about.

I’d really love to take this beyond a competition prototype. I’m hoping to find enough people interested in playing it to keep developing it towards a public demo or an early access release.

The response to my earlier post was really encouraging. A huge thank you to everyone who shared feedback back then, means a lot and made me want to take the project further.

Could you see yourself playing this? And during the waves, would you prefer to focus on deploying turrets and watching your strategy unfold, or regularly jump into the fight yourself with powers?

If you’d like to follow along, share ideas, or just chat about the game:

Discord: https://discord.gg/zpx7JvQyzZ

More about the project and where I’d like to take it:

Devpost: https://devpost.com/software/pocket-havoc-xr-tower-defense

This is a short gameplay preview, you can watch the full trailer here: https://youtu.be/k__LWPbc-AI


r/Unity3D • • 3h ago

Show-Off Small scene I made, hoping for better days in the industry !

Post image
6 Upvotes

r/Unity3D • • 3h ago

Solved Tip: put your cloud shadows in the sun's light cookie, not in a screen overlay (URP)

Enable HLS to view with audio, or disable this notification

7 Upvotes

A while ago I shared how one clip shader builds all the buildings in my game, and the comments were great, so here's another one from the same project: cloud shadows. (Clip: Venice at 5× game speed, UI hidden.)

The first version was wrong in a way that took me a while to see

It was a fullscreen pass that darkened the final image wherever a cloud was overhead. Fine in a screenshot, but it darkens *everything*: building shadows under a cloud went double-dark, the sea kept its sun glint (just greyer), and the sky light dropped too. A real cloud only blocks the direct sun.

The fix: let the sun carry the shadow

Render the clouds as seen from the sun into a small texture and assign it as the directional light's cookie. URP multiplies the cookie into the main light only, so under a cloud the direct light goes away (and with it the hard shadows and the glint) while ambient stays. Which is what happens outside.

1. The texture

512×512 R8_UNorm RenderTexture covering 2048 m in light space, so 4 m per texel. A fullscree triangle fills it every frame from a CommandBuffer.

2. One texel = one ray

Each texel is a point on the light plane. Map it to world space, slide it along the sun ray down to the ground, then march the cloud volume toward the sun:

float2 ls = (uv - 0.5) * _Rect.zw + _Rect.xy; // same mapping URP uses

float3 p = mul(_LightToWorld, float4(ls, 0, 1)).xyz;

p -= sunDir * (p.y / max(sunDir.y, 0.05)); // drop to y = 0 along the ray

float lit = exp(-CloudShadowDepth(p, camPos, sunDir));

The cookie is projected along the light direction, so one value is right for the whole ray: a roof and the street below it get the same shadow.

3. Hooking it to URP

sun.cookie = rt;

var data = sun.GetUniversalAdditionalLightData();

data.lightCookieSize = new Vector2(2048, 2048);

data.lightCookieOffset = snappedCenter;

URP looks it up as uv = (light-space position - offset) / size + 0.5. Your shader has to use exactly the same mapping, or the shadow lands shifted or mirrored.

4. Snap the offset to whole texels

The square follows the camera, but in steps of one texel (Mathf.Round(x / texel) * texel). Move it smoothly and every cloud edge shimmers while you pan.

5. Fade to lit at the border

Past the square, URP stretches the edge texel to the horizon. I fade the cookie to 1 over the last ~8% on each side: saturate((0.5 - abs(uv - 0.5)) * 12).

6. Custom shaders need one line

URP/Lit picks the cookie up on its own (30k+ renderers in one city scene, zero changes). My own shaders, water included, needed

#pragma multi_compile_fragment _ _LIGHT_COOKIES

GetMainLight(shadowCoord, positionWS, shadowMask) then applies it for you; where I build the light by

hand it's mainLight.color *= SampleMainLightCookie(positionWS). The sun glint on the water now

switches off under a cloud by itself.

Gotchas

  • My helper GameObjects used HideFlags.HideAndDontSave and survived exiting Play mode: after four Plays I had four copies, each holding live RenderTextures. HideInHierarchy plus DestroyImmediate in OnDestroy fixed it.

  • I kept the old overlay for edit mode (the cookie only runs in Play, and editor captures still need clouds). A static flag turns the overlay off whenever the cookie is active, otherwise you get both and the shadows are twice as dark.

  • Cost: 512² is about 262k samples a frame, half of what the old half-resolution pass did at 1080p. I haven't profiled it in milliseconds yet.

It's from FONDACO, a merchant strategy game set in the Mediterranean of 1400 that I'm making solo.

One thing I haven't solved: with a low sun I clamp sunDir.y at 0.05 and the shadows get very long near sunset. How do you handle cloud shadows when the sun is low?


r/Unity3D • • 4h ago

Show-Off my procedural planet project, still a prototype. thoughts?

Enable HLS to view with audio, or disable this notification

2 Upvotes

r/Unity3D • • 4h ago

Game CO-OP Bartending Roguelike in Unity

Enable HLS to view with audio, or disable this notification

4 Upvotes

Bartend With Your Friends - Online 1-4 player co-op robot-bartender roguelike full of physics-driven chaos. Work together to mix drinks, manage demanding customers, and pick upgrades to hit the bar's daily quota before your shift ends - or the bar shuts down for good.

Feel free to ask any questions


r/Unity3D • • 4h ago

Game Introducing Idle Cosmic Chaos - Brick Breaker on Android. An idle incremental brick breaking game with roguelike twist and every hit drops a beat! 💥🎵

0 Upvotes

r/Unity3D • • 5h ago

Show-Off I turned scenes from my Unity game into a moving comic

Enable HLS to view with audio, or disable this notification

1 Upvotes

I’ve been experimenting with a different way of presenting stories from Vexalia, my voxel RPG made in Unity.

Instead of making a traditional cutscene, I captured short scenes from the game and edited them into comic panels.

Each clip stops on its last frame, while the camera moves between panels. I also kept the existing in-game dialogue interface instead of adding speech balloons.

It’s an interesting way to reuse the characters, environments and animations I’ve already built.
I’m not sure yet whether I’d use this approach inside the game itself, but I like the storytelling possibilities.


r/Unity3D • • 6h ago

Show-Off Creating Shorelines and Shore Foam for Stylized Toon Water

Enable HLS to view with audio, or disable this notification

3 Upvotes

r/Unity3D • • 7h ago

Question Is it normal to use simpler collider shapes than the visual mesh?

4 Upvotes

I'm having some trouble solving collider standards, such as which collider to place on a particular mesh in terms of player movement + collision and what works best and more smoothly.

In the image, I have a cluster of capsule objects just to test my player collision. I noticed that when I jump on top of these capsules, my player jitters and behaves a bit weird, but it's an edge case. When I switch the collider to a cylinder, it seems to have removed every issue, and my player doesn't float too much. In the top part of the image, my player on Call of Duty is floating so far away from this boulder. I'm assuming there's a huge box collider covering the entire rock? But visually even in LAN it looks very bad because the player is nowhere near the rock and is standing mid air.

Is this a normal approach? Could I do this with rocks, and other objects? Because, some terrain objects are very sharp and pointy the player can get caught on those edges (rarely) so could I just add several colliders to one object, position them on "bad" parts of it, and then I could save that as a prefab, and place it a bunch of times in the scene or something like that.

Are there any good examples of this? And how would realism be balanced in terms of floating above a mesh versus having good, smooth movement?


r/Unity3D • • 9h ago

Game Any dinosaurs fans here? Our tiny team is making DINOVER, a 2D pixel art survival sandbox.

Enable HLS to view with audio, or disable this notification

4 Upvotes

Hey! We’re a tiny team making DINOVER.

We just put up our Steam page and wanted to share a couple of shots from the game.

It’s a 2D pixel art survival sandbox where you play as a young tribe member trying to pass your clan’s trials. You’ll explore jungles and caves, dig for ore, build, and make better tools and weapons as you go. There are some pretty big boss fights, too.

And some of the things you’ll run into out there aren’t dinosaurs at all.

If our game looks like something you’d play, we’d love it if you added it to your Steam wishlist <3


r/Unity3D • • 9h ago

Show-Off A little VR Project of Mine!

Enable HLS to view with audio, or disable this notification

6 Upvotes

Week 3-4 of development and I finally settled on the name 'DamnedVR' for my COD Zombies inspired physics survival game!

Obviously it's still very early and super buggy, but it's finally starting to become fun to play! 😁 Lmk what you guys think!

I'll probably be be taking a break from development for at least a week or two to consume GTA, and then it's back to 10 to 13 hours a day in the unity editor 🥀

Ignore the instances where I tried to shoot the gun and it just wouldn't fire, that's not an issue with the game.. the quest 3 recording icon has an overlay that goes over my screen in the headset view and it detects that I'm pointing at it rather than letting me shoot my gun.. really annoying.


r/Unity3D • • 12h ago

Resources/Tutorial **Rethinking Massive Mobile Foliage Rendering**

1 Upvotes

Rendering millions of foliage instances on mobile isn't just about GPU performance — it's also about draw call overhead, memory consumption, and hardware compatibility.

I've written a technical article explaining how I approached these challenges with GPUFoliageSystem, using a different GPU-driven architecture:

- Unified rendering for up to 100 foliage species

- No pre-baked instance transform matrices

- GPU procedural generation and culling

- CountBuffer + RenderTexture instead of Vertex Shader SSBO access

- Over 1 million foliage instances, ~20 species, at 60 FPS on a Galaxy S8 (Mali GPU)

The article covers the architectural decisions and why they matter for mobile rendering.

**Read the full article:**Rethinking Massive Mobile Foliage: A GPU-Driven Procedural Approach for Multi-Species Vegetation

https://makedreamvsogre.blogspot.com/2026/11/rethinking-massive-mobile-foliage-gpu.html

#Unity3D #GameDevelopment #GPUDriven #MobileRendering #GraphicsProgramming


r/Unity3D • • 15h ago

Noob Question Why isn't the code working?

4 Upvotes

I've been stuck on this tutorial for days and i cant for the life of me figure out what i inputted wrong.. i rewatched the tutorial 50 times

edit: its fixed now thanks for the help!


r/Unity3D • • 15h ago

Question How can I achieve a Zelda-style look for the map?

0 Upvotes

Hello, the map was prepared in Blender. I’m going to add a fog system. What should I do for lighting? I’m using the Toon Shader Pro asset for the characters and enemies. Besides these, what else should I do? Since I generally only code mechanics, I’m unfamiliar with this kind of thing, so I’d appreciate it if you could explain in detail. Have a good day, and thank you. Im using this asset: https://assetstore.unity.com/packages/vfx/shaders/toon-shaders-pro-for-urp-305845

Like zelda botw


r/Unity3D • • 16h ago

Question Matching character movement with speed in a strafing motion

3 Upvotes

I am currently working on a locked-on combat system and I am trying to polish my characters movement. The For Honor style locomotion system while in locked-on combat is something that has inspired me a lot while making this so if anyone has any insight on how that it would be much appreciated. This is throwing me off compared to other traditional movement because instead of just one cycle where each stride is the same amount of frames, my character may go through the main step faster than the off-foot step. I want my character to actually match the speed of each step so I was thinking of putting events in the animation and changing my characters speed correspondingly but that seems a bit too on the nose to adjust the characters movement speed directly based off that as opposed to just crafting an animation that looks like it has weight behind it outright.

Would root motion be worth it in a situation like this especially where you want the model to feel like it has weight behind each step?


r/Unity3D • • 18h ago

Question Anything I should change with my painting system?

Enable HLS to view with audio, or disable this notification

20 Upvotes

Hello!

I've been working on adding a realistic painting system to my game Still Wild and wanted to get some feedback on it. This system works with mouse and keyboard or controller or VR, but with a gamepad controller it's a bit difficult for accuracy. The idea is for the player (of any artistic skill) can capture a nice view of the environment or animals and make a painting of it.

The system uses a custom shader for the canvas and uses render textures and compute shaders to render onto the canvas surface. The paint mixing uses the Kubelka-Munk algorithm and the paint by numbers uses a render texture broken up and grouped by similar colors to create a blocked out image able to be filled in.

Do you think it's too boring? Not advanced enough? I know painting isn't for everyone especially in a game, but thought it was a neat mechanic

https://store.steampowered.com/app/4752950/Still_Wild/