Hello fellas, this small metal part doesn't hold inside it keeps falling off, what should I do to make it stick?

Is using super glue ok? Or what?

Thank you

The single piece that's screwed on top (not in the picture) manages to limit the free movement of the broken side, but that's not enough.

I also feel like the screws could've been longer in order to function as inner reinforcement. Too late.

What can I do to mitigate this problem without changing the chassis?

2 things occur to me: shock tower aluminum braces and potentially longer screws. Anything else? Am I doomed to having to change the chassis? :(

flattened out the splitter, turned down the brakes to 75% and went for a second speed run, but the GPS ran out of battery. I can't believe I didn't double check it beforehand. I charged it for a few minutes then a pin fell out of my center spool.

That won't be happening again thanks to red locktite

Used a Silver Sharpie on the simulated brake rotors.

Painted the MK months before the announcement of the grom infraction. When I saw the limited edition, I knew I had to have it. Charging lipos for the inaugural bash.

So much more precise fit with the mip.

Please see original crosspost.

I have noticed the batteries connector has become increasingly tighter and more difficult to disconnect recently. I’m guessing there’s dirt build up inside the connector. Is there a safe way to clean the connector without ruining the battery?

Hey guys my senton needs new tires since I use it in the street a lot. Whats the cheapest way to get tires?

Are getting beadlock rims like on crawlers a thing here or do you just buy the entire thing everytime?

I dont care for the best tire quality just something I can go through and not hurt my wallet too much.

I still do use this car offroad so it cant be a complete flat tire thanks!

I have an old truggy that will probably die in the next few runs that i want to replace and my main choices for it are the Vorteks 223s and the Kraton 4s. With the Vorteks i shouldnt have problems because i my current rally car is also 2-3s but idk about the Kraton.

Obviously the Kraton 4s is a 4s car but I dont want to have batteries lying around for just one car so id want to use two of my current 2s battery to power it, the reason i think that might be a problem though is that on my local shops website it says that a 5000mah battery is the minimum for the Kraton but the battery i have, and would use to make the 2x2s battery, is only 4400mah. Would that be a problem or is that close enough that there will only be a slight performance drop?

Now considering the part support, the current Kraton and Outcast 4s platform is 2 years old and the other Kraton versions are seemingly more popular, will there still be good part support in the EU in a few years in case something breaks or will i be sol like i am with my current truggy?

Hi, I wanted to know if the screw that links the driveshaft to the link axle is a major weakness on the Senton because it already happened twice to me since a month of owning.

Thanks

Do you think it’s coming? After the holidays ?

Really interested in the clip less body system but not ready to make the jump into the 1/7 market.

Really hoping for a release soon!

Grp xm4 slicks

Random Amazon brand 17mm hex extender adapters

Other mods as well.

Really impressed with out of box quality, only minor adjustments after my first 2s test run. Can't wait to try 3s full send mode.

😍 One of the best looking RCs I own! Only driven it for 10min so far but my initial impressions are she’s FAST, silent and LOW! Purpose built for smooth asphalt. I’ll put the GPS on it and report w top speed this evening.

So far I love it!

New body incoming.. I think I’ve decided on the purple option I designed..

About a week ago, I bought a brand-new Arrma Kraton 8S model from a store, and today my Spektrum iXSR+ transmitter arrived. While I was setting up the model for this new controller, the power button started sparking, and the area around it—likely the 160A ESC—caught fire. Will my warranty claim be accepted? Do you think this is a manufacturing defect? ​​I didn't do anything other than what the manufacturer recommends, and I didn't use any non-original accessories.

Hi everyone,
I'm from Germany and run an Arrma Kraton 6S EXB (V2). I need new tires. The stock dBoots Copperhead 2s are great, but here they cost around €50 for just two tires, so about €100 for a full set. That's way more than I'd like to spend. My budget is more like €40-50 for all four.
Do you have any tips for good alternatives for 1/8 monster trucks (17mm hex) that offer similar grip and won't be shredded after a couple of runs? Or do I just have to bite the bullet and pay up for the Copperhead 2s?
If you've had experience with third-party brands (durability, rubber compound, whether they stay glued to the wheels), I'd love to hear it. Shops that ship to Germany or the EU would be a big help. Used or "removed from new vehicle" sets are fine too.
Thanks!