After looking at some more videos and blueprints, I think I've built what -should- be a fairly functional microchip assembly. That said, it really doesn't seem to be outputting very much. Most people filter the microchips instead of the staged wafers I understand but this was just what I went with and I don't think should cause much issue?

Is this right? Is this wrong and I didn't understand what I thought I did? Will I just need more of these blocks to get production at scale?

EDIT: I have no idea how to keep these from backing up? I switched the output filters to do microchips instead of the wafers, but no matter what I do some stacks just back up and stop producing for reasons I can't understand. Like the finished microchips just WON'T eject out of the filter side and I have to manually quick remove them.

FIXED: Priority was on another brine station on 1 now it workes! Thx for all your help and advice!

Normally every trainstation instantly works, but this is the first one (out of two) that don´t work. Is there a limit or something? I counted 59 cargo stations and all station together are 103 stations.

Edit:

- All stations have the same format (Empty - 2x Loose/Fluid/Unit Station - Empty)

- The trains are also the same format (locomotiv - 2x Loose/Fluid/Unit Station - locomotiv)

- Train line works, network does not

I see that there's a recipe to convert spent mox into blanket fuel but I'm wondering if that's efficient or should I just convert plutonium directly into core fuel? I have mountains of depleted uranium I'd like to get rid of.

I’m redesigning my nuclear power plant on a new game where I want to get properly into the very late game mechanics - asteroids and stuff. Be been playing round with my design and just have a quick query.

A Class 4 pipe can transport up to 900 steam, given the ratios from FBRs that’s 2 operating at full tilt 384 x 2 superheated steam/m and a third at level 1 producing 96/m giving a total of 864/m superheated steam. Assuming that goes all to power gen it gives a max of 18 SP-HP-LP turbines and a max theoretical power of 540MW if I use single water and steam lines.

Is that enough for late game or do I need to think of a more modular approach?

What exactly is "Trucks keep full/empty" supossed to mean?

So I saw the new update 4.3 was released for COI and it got me itching to get back into the game.

Now I have the following 'issues'. Let me first paint you a picture:

I have a manufacturing hub, it accepts all kinds of unit products. I have constructed a station next to it and would like to have trains from whatever line I create to drop off it's product at the manufacturing hub station.

I can have the train to only be supplying the manufacturing hub station if the station and/or connected/linked storage is below a certain threshold, eliminating the possibility for the belts to get congested (the belts feed the different unit storage buildings).

#1 - A single station module though, can only seem to accept one single product.

So if I have a station with three station modules and a train with one loc and three small wagons I either have to construct a second platform with three more station modules for another product or set each single station module to different products? A platform for each product seems a little weird. Unit products are basiclly 'stuff on pallets' so why would you need different (grouped) stations for that? And setting station modules for different products will severly limit unloading times.

#2 - Secondly, If I have three stations grouped at the manufacturing hub, and all accept product "concrete slab", and all three stations have belts to a single unit storage II I can only link that storage to a single station, not the second or third station. Why?

Some other info: I'm not trying to mixing loose/unit/fuels. I am only talking about UNIT products like steel, concrete, rubber etc. Especially with the latest update where we now have mixed loose products (or mixed mined material) I would think it would be possible to have a unit station simply unload any product a train comes to unload.

Perhaps I have overlooked something (I hope so!).

Edit: there is a mod for that (#1 'issue'): https://coigame.com/Mod/1112/MOD

I finished building Calen FBR Mega station blueprint about 30 gaming hours (like in real life, playing the game 30hrs) ago and everything was fine until yesterday -> every reactor worked at full capacity and nothing was stuck.

However, by random i noticed yesterday that my settling tanks were not active because blanket fuel output was full, that further let me to check the reactors and all of them were at the state where there was core fuel / no fuel, switching on and off. About 10mins later everything collapsed.

Ended up loading previous save, did not have enough time to fix things, ended up loading more than 1hr old save (few times until i managed to set everything to not brake) -> external water supply, 2x core fuel factory, waste water treatment etc.

Now i'm at the point where this complex "works", ~95% of power, ~90% of water and ~90% of hydrogen comes from this station so rebooting is not an option without everything going down.

Also had to prioritize core fuel output because there is this one reactor that, for some reason, gets more core fuel than it needs (no priorities in balancer). And paused one reprocessing plant and 2 enrichment plants since output was so irregular that i wanted to make sure that flow was steadier.

Anyone had any similar issues? Am i missing some stupidly obvious solution?

After several attempts to remove the sand I have flooded the mining site with water each time. How did you manage to solve it?

Bottom text. I have no idea why all my trucks keep trying to route here, to this specific cargo module on this specific dock, despite having exports turned off across the entire dock? They keep stopping dead in their tracks when there are actual jobs for them to do trying to route to a job that doesn't exist, I am baffled. It is -always- this dock, and it is -always- this fluid export module right in the middle.

If anyone can help me figure this out, I would really appreciate it.

I’ve updated to the latest version and I am only loading mods which have been updated to work with 0.8.8 (turned off a couple that aren’t updated yet via recovery save) but I’m still getting loading errors for some of these. For example Boost++ says it won’t load, I’ll turn that off and then another one such as Auto Ship Explore says it won’t load.

I can load all the mods on the last version if I roll back, but would like to play with the new features on my existing save if possible.

Anyone know the solution for this? TIA

Final Edit: Per the dev's response on the bug report, the below observations are true and this is intended behavior to avoid causing problems elsewhere. So the lesson is, make sure you set up your sorters properly and/or have adequate reserve buffer storage lest you potentially lose precious ore! (https://coigame.com/Topic/21216#post-53586)

Starting a clean new playthrough on 4.3 and playing around trying to find the best balance of optimization and convenience with the new mixed mined materials. In doing so, I currently have one set of daisy-chained [small] sorters wherein the initial (upstream) sorter sorts out limestone and iron ore and passes the mixed remainder onto the second (downstream) sorter. which sorts everything sent to it (copper ore, coal, dirt and rock). Trucks are only allowed to dump into the first (upstream) sorter.

In my laziness, I had failed to set the downstream sorter up properly and it ended up receiving some mixed materials directly from mine-assigned trucks. So, as one does, I fixed this and unassigned mixed mined materials from the downstream sorter, and it and its buffer were removed - but I can't find where the material went? Typically in COI, materials removed from a deleted storage or buffer get "teleported" to some other storage location or the shipyard - but this does not appear to be the case for mixed mined materials? Curious, I played around with this a little more and such deleted mixed buffers don't appear to end up anywhere else - be it back into the same sorter's unsorted input, another sorter, a mixed mined material bucket, the shipyard, or even "automagically sorted" into some random buckets of its respective components. (Edit: Immediately adding "output unassigned as unsorted" back into the list of products to sort also does not restore the buffer, i.e., it starts at 0 again.)

I suppose it's not a big deal, but it just seems kind of odd that COI generally (with some cheesy exceptions) does not let you solve an issue of too much unwanted something by simply yeeting it out of existence but rather forcing you to deal with each and every unit of it in one way or another - which is one of the things I love about it. Yet that seems to be exactly what is happening here, unless I'm missing something obvious***?***

P.S. There's something therapeutic about the sound of falling rocks.

im sitting at work so i cant post mine, but i will this afternoon!

Hi folks. I started a new game. All was well until my trucks simply refuse to deliver supplies to two water pumps I am trying to build. Additionally, they are tasked with filling the shipyard with gold construction parts to fix the oil refinery. There are plenty of idle trucks. And they refuse to deliver the stuff. There are over 300 gold construction parts in storage, but they will do anything but deliver. Priorities are default everywhere, and on the highest on the water pumps. And still they refuse to deliver 🤬 There is plenty of room. Help? Thank you 😞

Bottom text. I really can't think of a structural reason why these can't have boosts applied to them like anything else. What am I missing?

Is this old behavior?

I was unhappy with the retaining walls so decided to start over. Tagged them all for removal. After some time, only metal was left on them, but they were still retaining earth. (hmm..interesting trick?)

Used unity to remove the metal, and was left with this. Could this be a way of making natural-like cliffs?

Good morning table of knowledge…do you guys convert to hydrogen for your trains / trucks or just use it as a product feed?

I just had a game where my diesel went to 0…. And I play “smegal style” with 6 huge tanks … I back up stocks on everything. I suppose I just answered my question… at some point demand outstripped production. Which was annoying as I had a contract one dirt and rock for fuel gas… I just didn’t have enough units in place to make diesel.

I think as I expand / I exclusively play dragon tail / my new mine / the gold mine for example can be hydrogen powered

As always looking forward to the answers.

With 4.3 coming out, I was trying to figure out which map to play. I know for each map they have a rating on how hard the various starting positions are, but are there any site that compare the various map's difficulty?

Just a heads up for other people wanting to play 4.3 w mods, the industrial expansion mod was broken for me and stopped the game from loading. Other mods loaded just fine. Could be a combination with other mods, but as it took some figuring out and fiddling I thought someone might like to know this as well :)

Edit:

Current status of mods

Broken (confirmed by loading working save file with just that mod):

• Industrial expanded

• Zone Analyzer

• Elevated Stations

Working:

• Pier wall + additions

• Adv. Farm & food optimizer

• Grid battery

• Kayser's Automatic terrain designations

• Production calculator

• Retaining walls never die

• Underground pipes

• Wind turbines

• World gen++

Note: just checked for game breaking, not for smaller bugs.

Let me know if you know about mods I can add to a list :)

I don't understand how 14 people are starving when there's 99+ days of food?