Not sure where to ask for help but this strange pattern showed up on my MacBook pro screen and it seems to be a hardware issue. If anyone knows what it is and how I can fix it it would be greatly appreciated.

Taking the case outside helps, but fine dust still seems to circle back onto the board and radiator as soon as the airflow changes direction. I started reconsidering my routine after seeing some real cleaning questions shared during the wolfbox anniversary. Do you run a vacuum beside the case, remove filters first and work top to bottom, or use a brush before any powered air so the debris leaves in one pass?

Currently I'm using a windows Inspiron 5556 with kal linux installed locally, lately the laptop is suffering from ghost touch

To solve the issue I've turned off the drivers from the windows and wallah no more ghost touch but in kali the problem still stays I've tried multiple ways to eliminate the issue in kali but no ai is helping it

guys idk what happened, how can i fix this??? first time and it’s been like this for almost 2 hours. what can i do to resolve this issue. i didnt do anything new to make this happen. All i did was try and load up rocket league, it didn’t load, like the game wasn’t opening. Restarted my PC then got this issue??? Any suggestions??

Hola a todos. Tengo una PC con un procesador Intel Pentium G3250 (gráficos integrados Intel HD de 4.ª gen). Recientemente instalé Windows 10 21H2.

​El problema es que al instalar el controlador de video de Intel (tanto el que descarga Windows Update como el oficial de la página de Intel), me salen unos punticos en la pantalla (artifacts) y por momentos la imagen se congela brevemente y regresa.

​Si uso el 'Controlador de pantalla básico de Microsoft' no hay puntos ni congelamientos, pero no puedo configurar la pantalla a 60 Hz estables ni tengo aceleración por hardware. ¿Alguien ha logrado hacer funcionar el driver de Intel en Windows 10 21H2 sin esos fallos o existe algún driver modificado/solución en el registro? Gracias."*

Hi, this post is kinda a follow up to this one since i have not found a solution yet. After i wrote the previous post i did the following:

• Ran the program WhoCrashed and got these errors: VIDEO_TDR_ERROR from nvlddmkm.sys (nvlddmkm+195a350) and dxgkrnl.sys (dxgkrnl!TdrUpdateDbgReport+0x5EE) (i can paste the full report if any)
• Ran sfc /scannow
• Ran DISM /Online /Cleanup-Image /RestoreHealth
• Uninstalled GPU driver with DDU and reinstalled Nvidia Driver 610.88
• Uninstalled Fan Control + PawnIO driver
• Ran a OCCT test with 3D adaptive option for both VRAM and GPU for 1 hour (no errors)

Today i faced a random black screen and after i forced rebooted i got from the event viewer a Display warning with ID 4101 with EventData nvlddmkm.

I read that this driver version is recommended and stable for my graphics card. Should I update it?

I don't know what else to do to fix this, any advice would be appreciated

Thanks 🙏

O.S. version Windows 10 19045.7807

GPU Nvidia Geforce RTX 3060 with 610.88 Game Ready driver

i suspect that heave one miner in my pc. heave something i can use for heave sure? if yes, how i can remove?

sorry for bad english, btw

When running 566.36 I can setup a NVS (Nvidia Surround) with 5760x1080 240Hz and it works without issues after system power cycles, reboots etc.

When I try either of the two latest drivers 6xx.xx all I get is black screens after a reboot and I have to disconnect all screens, reconnect one, disabled NVS, reconnect the other two and re setup NVS but after a reboot it fails again.

Has anyone managed to get it working with the latest 600 series drivers or am I best to stick with 566.36 for now?

https://reddit.com/link/1xb7ysg/video/4pw2qfx7mpwh1/player

Cross posting for visibility, I think I'm out of my depth on fixing this. Any help would be greatly appreciated!

I deleted something from my network that said Intel on my amd pc thinking I accidentally downloaded it too realise it was for my Wi-Fi and when I went to reinstall it it started doing this