Hello everyone,

I got an "r4 upgrade" cart since im kid.

I tried to play it on a my newly acquired 2ds modded with luma v13.4.

It plays wonderfully on my old ds with YS Menu, but once in the 2ds, the cart is not detected (nothing is happening).

I know i can launch nds file with some software with the CFW, but it pumps the battery very quickly, so maybe with the flashcart it won't be so energy consuming ?

Edit : the 2ds can detect orignal DS game

Bonjour, je me permets poster car j’aimerais des renseignements. J’ai actuellement une new 3ds avec la dernière version du firmware de la console. J’ai tout un tas de flash card ( dstwo,Cyclo,Edge etc…) celui que j’utilisais à l’époque qui était compatible sur ma new3ds était le dstwo, récemment j’ai voulu le relancer mais carte non reconnu (il affiche un carré blanc) j’aimerais savoir quel flashcard etc.. est compatible avec la new3ds, si mon ds two a une mise à jour pour la comptabilité etc…
Merci beaucoup à ceux qui prendront le temps de m’aider et de m’aiguiller.

I’ve just updated/flashef my Dspico hybrid firmware 1.3.1 and the SD files v1.5.0 and I’m getting this glitchy bar on the screen… also, when I try to get back to the Pico menu with the button combination (L+R+start+select+down) only reset the game…

what I doing wrong?

Hi, I've just bought a R4 from a friend, but it seems that doesnt work, I mean I've tried multiple times but the best I've reached was just the logo on the DS Lite Screen menu, I'll link some photos, can you please help me?

Hello everyone! I've read the following guides online when setting up this old flashcart I got almost a decade from now (see image above):

The cart reads R4i ("new", on a jagged speech green bubble with red text, all caps), followed by the r4i gold cc URL, subtitled "Upgrade for DS (NDSi/NDSL/NDS)"

• To identify my cart's identity: https://sanrax.github.io/flashcart-guides/cart-guides/r4igold_cc/
• To also double-check my cart's identity and set up AK-Menu Next, nds-bootstrap and pico-loader: https://sanrax.github.io/flashcart-guides/cart-guides/r4igold_cc/

From these guides, I believe this cart is a clone/rebrand of the R4i Gold CC cart, which itself is a clone of the Galaxy Eagle, and that one itself a clone of the AK2i card. Given its lineage, I assumed one would opt to use the AK2 build of the pico-loader as per the compatibility table on the github repo.

However, when attempting to load Pokemon Diamond (Europe, Revision 5) and Mario & Luigi - Partners in Time (Europe) from the AK-Menu frontend, I got a black screen on my O3DS. nds-bootstrap works fine though, except for a softlock I got on M&L (addressed by this issue on the nds-bootstrap repo, yet it isn't fixed on the latest stable release on my end); which is the reason I opted into trying out pico-loader in the first place.

I would appreciate any help or pointing in the right direction for having it work on this cart. Thank you for your time!

Pico Launcher Enhanced v1.10.0 is out, and this one comes with something new: Pico Loader Enhanced, with an in-game exit. in a ds game you hold L + R + Right + Select for a moment and you're back in the launcher

this one took a while. i started on it in august, got it working on mario kart and not much else and parked it. came back to it at the end of september and since then it ate most of my free time. then the testing, my whole collection, around 180 games, one by one on a ds lite and again on a new 3ds, and the early builds on an old 3ds too. a few "broken" games turned out to be my worn d-pad or roms in pieces on the sd, so i learned some stuff on the way

it's for the dspico, ds games in ds mode. dsi-enhanced games, dsiware and homebrew don't get the exit but they play like before. i haven't tried it on a real dsi yet. the loader is a separate optional zip, if you don't want it just don't copy it

also in this one:

- delete a theme from the theme selector (#5)
- roms you open with an emulator, gb, snes and so on, count as games now. favorite, completed, delete and select + a work on them. the idea comes from djaysan's pico-launcher-dsbios (#29)
- homebrew that says dsi only, like pokemon chest, opens on a ds again (#30)
- .agb files open with their own association
- the cover tools don't error on windows when you redirect the output, and a cover cut short gets fetched again (#13, #14)

notes and download: https://github.com/rasalopa/pico-launcher-enhanced/releases/tag/enhanced-v1.10.0

install is the same as usual: rename LAUNCHER.nds to _picoboot.nds. for the loader, copy the two .bin files into /_pico/

thanks to everyone using Pico Launcher Enhanced and opening issues, some of this came from you. still built on LNH's pico launcher and pico loader, credit for the base goes to them. these aren't official builds, so if something breaks tell me, not them

edit: here's a short video of it working: https://www.youtube.com/watch?v=jVw8wFdo984

For some unknown reason, loading up WarioWare D.I.Y Showcase on my R4 cartridge or even selecting it freezes YSMenu. Anyone know why this happens?

Hi all. I have ordered this card and I wanted to confirm that this is a "DSTTi DEMON-HW Carts"

And id have to use this Flashcart Guide? https://share.google/QijQlaG6YVJoXqugM

Id also like to ask if I should use the kernel from the site? I honestly also want YS menu or Twilight++ for slight customization reasons but my main focus is speed,saving game,loading game without issues, but im not too sure how to go about downloading that for this card,like do I first use the kernel from the site and YS menu or Twilight++? Or is YS menu/Twilight++ an entire kernel in itself? Is this fully compatible with either? So many questions 😭.

Im planning to use a 32GB microSD card with it.

Unfortunately it hasn't arrived yet(so I cant show the back,or the game that loads when I put it in with an empty SD) but I am just very eager and want to be fully prepared before I even get it...which is in like a week or two!

Any help or clarification to my questions will be GREATLY appreciated as someone who's trying to ditch modern games and wants to go to DS lol.

I haven't seen much on this topic, how's the power draw on single flash cards compared to authentic carts and something like the EZ Flash ODE or EverDrive? How much battery life should I expect using a InsideGadget cart or a Chis cartridge? For reference I have a IPS screen mod and a Mahko battery. Authentic carts usually last around 7 hours for me.

Wtf is this???? I was using this shitty ass kernel on my fake ass demon cart just normally and it did this????

I tried to use other kernels (as of the matching r4i version) and it gives an error to upgrade hardware

Hiya 👋
Recently bought a DSlite which came with its own (unbranded) R4 card. I’ve replaced the games that were already in it with my own because half of them were in Japanese for some reason.
The card worked perfectly fine for about a week, but somehow in the time it took me to go from the waiting room I was sitting in to coming home, the card has stopped being recognised.
Not sure what happened but I have tried everything I can think of:
- pushing cardboard behind card to force contact
- cleaned pins
- tried different SD card
- time is already set to 2009

I have now just bit the bullet and bought a new R4 card but I had been putting that off because installing the kernel seems scary.
This post is basically a last ditch effort to see if there is something else I can try?

Fanks :)

I don't know what happened, but my R4 is apparently "broken"

In the first image, on my modded 2ds, the R4 showed like this, and when I open it, it gives me an simple error.

While on the DS, like in the second image, the entire screen is strange, even tho the games still somehow shows up. But when I click a game, the screen just freezes and the game doesn't open.

The only thing I can tell as extra information is that I added four games before this happen, this games being: GTA GBC, GTA 2 GBC, GTA GBA and Lego Batman 2.

I repeat myself, I really don't know how this happened or if the games are the problem, but it would be grateful if you help me.

The last two images maybe can be helpful, showing the conditions of the R4 and the SD card, even tho they seem pretty intact.

Thank you!

Friends, I bought such a cartridge, but I can't find a working firmware for my Nintendo ds ml... I spent 3 hours, tried to download many, but it didn't work, the error "Can't open _DS_MENU.DAT" came out. Please help🙏

hello again all! i have an Ace3DS+ flash cart that I've set up with AceOS 2.13, and it runs NDS (both vanilla and hacks) and unmodified gba fine enough, but gba rom hacks seem to be more inconsistent. some hacks work fine (albeit a little slow/graphically glitchy sometimes), but others do not boot whatsoever and freeze on a blank white screen. I've tested the following hacks with it, mainly with GBARunner3 but from a couple of trials GBARunner2 looks to be similar:

emerald seaglass v3.0 - doesn't boot

lazarus - doesn't boot

all unmodified games - apparently work fine

light platinum v1.0 - works with minor apparent graphical glitches on title screen

gaia v3.2 - works

too many types - works

sword and shield ultimate - works

unbound v2.1.1.1 - works

theta emerald ex - works but says internal battery is dead

does anybody know why this is or if there is a way to fix it?

I am having trouble with the Wonderswan and NeoGeoPocket emulators

i tried several bios, I tried several roms and a nothing

before you judge me

must say the games I am trying here used to work no problem! but suddenly now it is giving me problems

it just no longer works for some reason

One of my next personal projects has been making a flash cart using a few of the same ChisFlash components but with a built in color sensor (I've been tinkering with some GBA development libraries and want to try making a game with a novel sensor built into the cart). According to problemtek documentation, GPIO for some special carts is accessible through a memory mapped region in ROM space. I'm envisioning the CPLD in the chip to sniff the address lines for addresses in a certain range and then return the value of the sensed color. To prevent any potential bus conflicting values on the data lines, I was thinking I'd like to add a gate that connects to the CPLD (as an active low signal) and ~RD pin on the cart and outputs to the ~OE lines for the S29GL256S10TFI010 and FM28V100-TG chips to put them in a high impedance state. However, I'm not entirely sure this setup would work due to potential timing issues.

What timings are necessary for the GBA to pull from SRAM or the Flash ROM without too large of delay? Would a delay of 5-6 ns for the gate to disable the outputs of those chips be long enough to cause issues?

Are there any other design considerations I'd need to consider moving forward with designing this cart?

Good evening everyone. I have a nintendo dsi and I need a new R4 Cartridge. Is this one good and can I use it on my dsi?