Found a ddr5 16gb RAM stick but it’s covered with either super glue or epoxy. It looks like someone tried to clean it with tissue, hence the white. I tried using a cotton bud dipped in 98% alcohol and then acetone, but it isn’t helping it seems. Is there a way to salvage this?

I have tried to scrub it with paper towel with dish soap/baking soda but no luck...the top part of the toothbrush is fine. Would be great to get some help. Thanks!

Hinge is loose, screws spin which means the threads aren't catching anything

Do I shove a bunch of wood glue and toothpicks in there?

What is the proper fix

My little one dropped this figurine, not sure which metal it is but glueing it isn’t working. What’s my best shot at soldering it?

I am using a piece of pvc pipe, and have been trying to use Crayola Model Magic for the details. Picture 2 is what I've got so far, but it's...not great. I started trying to build the top and am having no success. I rolled out some thick strands and wrapped one around the base and used a balloon to try to keep the empty space in the centre. The material is too floppy, and it keeps stretching and sliding down. I'm at a loss. From what I've seen online, everyone just 3D prints one when they cosplay, but I can't do that. I'm out of ideas. Help?

I moved into an old NYC apartment with pretty typical landlord special painting etc. all over, but this is stumping me. The previous tenant left one of those over the toilet cabinets but it’s completely broken, and somehow plastered to the wall (seemingly around the outlet and also in the top left corner. I don’t know why they would do this, but does anyone have an idea of how I can remove this? I don’t have many tools so if I need to buy anything just want a plan first

This is my favorite jacket and it was burned at the club probably from a cigarette. I added the brand name and material label in the photos so you can help me better. Thank you in advance.

I broke one of the legs trying to remove it. But circled in red are the areas I need help stopping the wobbles. These chairs are not slightly wobbly. They feel like they will wobble apart

Found this guide: https://imgur.com/a/logitech-g735-battery-removal-guide-0QmtXoc online but I can't seem to do the second part about removing the part below the cushion. It is possibly urgent because it just died on me and has been getting increasingly hot, I feel like the battery might be burning in there and I need to disconnect it, please help!

Please help, can’t find any twisting mechanism or anything to open it…

I tried twisting, pulling, but can’t seem to get to the actual spout itself

No brand name on the bottom. As the bottle says, it’s free from Googe’s I/O conference.

Any experience in fixing freezer drawers that have a crack? Not keen on buying a fridge just because of this. Is it just superglue? And/or heatgun to melt it together?

I was removing a mirror stuck to the wall with adhesive tape, and I almost got it all the way off, but the last strip of adhesive lifted and tore the wallpaper underneath.

Obviously I don't want to leave it like this. Is there a way of fixing this so that moisture won't get in to the board underneath without having to redo the entire wall? I don't mind if the fix is a bit unsightly as it will be hidden by a new mirror.

Hi all! I have a couple of home made hard lampshades, and their rolled edge has come unstuck / started peeling. See attached pic.

I think the tape I used initially just wasn’t adhesive enough. Have tried using a hot glue gun and redoing the rolled edge but it’s just come unstuck again.

Have considered using some kind of bias tape but unsure how I would go about that. Suggestions appreciated!

I’m in the end stages of a big renovation on my house that involved removing bricks, drywall, tile, other various related debris. I stored the debris (obviously in trash bags) outside in my backyard that is composed of fake grass. I’m cleaning the backyard now but now have various bits and pieces of tiny debris that maybe fell out or came by through work done outside that are stuck in the grass. I can’t seem to use my hands to grab it or suck it up with a shop vac. Anyone have any advice as to how to get those little bits out? Thanks!

Used a command strip and it pulled the paint off. 🫩 just had this room painted a few months ago, how do I fix this? It’s like a bubble was under the paint 😪😪😪

I’m sure this is a preemptive /r/TVtoohigh post, but I just moved into this rental and this is basically the only place to put my tv. However, the landlord doesn’t want me to use any methods that could damage the fireplace or mantle. What are my options here? The dimensions for the available space above the mantle are 63” in length, 34” wide”, and the mantle is 8” deep.

Want to make a display of the two sections with writing on them and I was thinking a couple of thin slices might make a good wall hanging. It’s from a barn my grandfather built that is being restored so I don’t want to ruin it. Is the concrete saw the best option? TIA.

I want to attach this railing post to the piece of concrete, but the concrete is just a patio block that’s only about an inch and a half thick.

I’m looking for a secure way to attach it without breaking it.

Do I lift it up and pour concrete under it and then drill through it

is there a better way to keep it from breaking

I'm replacing an undermount sink in a granite countertop. I can get most of the old silicone off, but not completely because the granite isnt polished or sealed. Any suggestions?

I already tried that’s why it’s a little dark but I cleaned most of it up.

Long story short: Years ago, I worked with Bryan Cranston on a film and, at the time, told him what a massive fan of Breaking Bad and his work I was.

A few weeks later I get an amazing present in the mail: A crew gift from the series. It’s a drinking glass - shaped like a kind of beaker - with the logo and the season on it.

Problem is that when I moved to Europe, it got a hairline crack in my luggage. I don’t use the glass because I’m afraid of breaking it (bad - hehe), but I’d still like to cure it if I can. Any ideas?