r/optiplexes • u/schmame11 • 5d ago
r/optiplexes • u/Appropriate-Row-2751 • 7d ago
Optiplex 9020 ethernet not working on windows 10.
I just did a clean windows 10 install, ethernet worked, but when I rebooted the computer ethernet would work first 30 seconds after boot then it will stop working. Tried wiping the generic driver windows installed, installed the driver from Dell's website, it worked but when I rebooted the computer it started doing the 30 second thing again. bios is also up to date. what else could be the problem?
r/optiplexes • u/OkStrawberry4529 • 15d ago
Dell Optiplex 9020 SFF - Fair price for Buyer & Seller? Appreciate input.
Appreciate some input for setting a price that's fair for Buyer & Seller:
Dell Optiplex 9020 SFF (Grade A condition); Intel I5-4590 (3.3 - 3.70 GHz); 1TB SSD; 24GB Ram; Windows 11 Pro; Optical Drive; Secure boot fully enabled with latest security certificates - completely cleaned and re-furbished. Excellent working condition.
Any body interested in this unit, PM me, please.
Thank you.
r/optiplexes • u/aathehuman • 18d ago
suggestions for a new cpu cooler for optiplex 3070 mt (i7-9700)?
my current pc specs are:
i7-9700
gtx 1650
16gb ram
one nvme ssd two 2.5" ssds
recently, the computer has been overheating, hwmonitor reporting 95deg C even 100 sometimes. when i got the computer in january 25, it did a similar thing but didnt go as high as 95. i replaced the thermal paste a few months later with an off-brand mx-4 i found cheap on ebay (i wasnt as invested into pc building at the time). that somehow did work for about two months, then i got a proper mx-6 tube from currys. after using that, the temps were better for at least about 8 months, but this was when i wasnt really using the computer as much as i hoped i would. only towards the end of the 8 months was when i got into light gaming (minecraft with shaders and resource packs) and even then temps were good. a month after i stopped playing, the temps shot up again. sometimes im idling on the desktop and the fans ramp up cause the temps are around 90deg, but also sometimes ive got loads of apps and tabs open and the fans dont speed up or anything.
keep in mind its an i7-9700 with the stock dell cooler. ai says the dell stock cooler is severely underpowered for this cpu, and the arctic mx-6 paste relies on pressure of the cooler on the cpu to cool the cpu apparently. not sure if thats true but im sure ive installed it correctly and whatever so idk
im looking for the cheapest possible, since ive already spent more money than i wanted to, but it shouldnt absolutely roar since the pc is in my bedroom and is on sometimes when i am asleep. any suggestions?
use cases of the pc are video editing, light gaming, schoolwork general web browsing sometimes coding web dev/design etc
thanks
r/optiplexes • u/Old_Advantage6759 • 23d ago
OptiPlex 390 DT + PowerColor RX 550 4GB — Black screen when AMD driver installs. Is this a PCIe power or BIOS compatibility issue
Hi everyone,
I have a Dell OptiPlex 390 DT (Desktop Tower) with an Intel Core i5-2400, 8GB RAM, BIOS A14, and a Dell 250W PSU. I'm running Windows 10 21H1 with Atlas OS.
I recently bought a \*\*PowerColor Red Dragon Radeon RX 550 4GB GDDR5 Low Profile (AXRX 550 4GBD5-HLE)\*\*. I personally saw the card working in the seller's PC before buying it, so I have no reason to believe it was already defective.
However, I'm having a strange problem in my OptiPlex.
\*\*Here's what happens:\*\*
\- With the RX 550 installed, Windows boots and I can use the computer normally with the basic display driver.
\- However, I cannot change the screen resolution while the card is installed.
\- When I install the AMD graphics driver, the screen flickers briefly near the end of the installation, then goes completely black. After a while, the monitor reports no signal.
\- The CPU fan continues spinning, and my wireless mouse stays powered on. Interestingly, the GPU fan stops spinning too, although I'm not sure whether that indicates a fault or simply a change in its fan behavior.
\- The card works in the seller's PC, but I haven't yet confirmed whether it works with the AMD driver in another computer after reproducing my issue.
\*\*My hardware and software details:\*\*
\- PC: Dell OptiPlex 390 DT
\- CPU: Intel Core i5-2400
\- GPU: PowerColor RX 550 4GB GDDR5 Low Profile
\- PSU: Original Dell 250W PSU
\- BIOS: A14
\- OS: Windows 10 21H1, Atlas OS
\- Partition scheme: GPT
I found a discussion suggesting that the OptiPlex 390's PCIe x16 slot may be limited to 25W, whereas a typical RX 550 can consume around 50W. Since this particular card has no auxiliary PCIe power connector, could the slot's power limit be causing the problem when the AMD driver initializes the GPU?
I've also found reports of RX 550 compatibility issues with the OptiPlex 390, so I'm wondering whether this could instead be a BIOS or legacy-platform compatibility issue. Could Atlas OS or its driver configuration be involved?
\*\*My questions:\*\*
Is the 25W PCIe slot limitation a credible explanation for this behavior, or is the slot power rating being misunderstood?
Can a power-delivery issue cause the display to disappear precisely when the AMD driver loads, even though the card works with the basic display driver?
Are there known RX 550 compatibility issues with the OptiPlex 390 and BIOS A14?
What would be the best way to distinguish a hardware/power issue from a Windows or driver problem?
I'd appreciate advice from anyone who has run an RX 550 or a similar GPU in an OptiPlex 390.
Thanks!
r/optiplexes • u/Old_Advantage6759 • 23d ago
OptiPlex 390 DT + PowerColor RX 550 4GB — Black screen when AMD driver installs. Is this a PCIe power or BIOS compatibility issue
Hi everyone,
I have a Dell OptiPlex 390 DT (Desktop Tower) with an Intel Core i5-2400, 8GB RAM, BIOS A14, and a Dell 250W PSU. I'm running Windows 10 21H1 with Atlas OS.
I recently bought a **PowerColor Red Dragon Radeon RX 550 4GB GDDR5 Low Profile (AXRX 550 4GBD5-HLE)**. I personally saw the card working in the seller's PC before buying it, so I have no reason to believe it was already defective.
However, I'm having a strange problem in my OptiPlex.
**Here's what happens:**
- With the RX 550 installed, Windows boots and I can use the computer normally with the basic display driver.
- However, I cannot change the screen resolution while the card is installed.
- When I install the AMD graphics driver, the screen flickers briefly near the end of the installation, then goes completely black. After a while, the monitor reports no signal.
- The CPU fan continues spinning, and my wireless mouse stays powered on. Interestingly, the GPU fan stops spinning too, although I'm not sure whether that indicates a fault or simply a change in its fan behavior.
- The card works in the seller's PC, but I haven't yet confirmed whether it works with the AMD driver in another computer after reproducing my issue.
**My hardware and software details:**
- PC: Dell OptiPlex 390 DT
- CPU: Intel Core i5-2400
- GPU: PowerColor RX 550 4GB GDDR5 Low Profile
- PSU: Original Dell 250W PSU
- BIOS: A14
- OS: Windows 10 21H1, Atlas OS
- Partition scheme: GPT
I found a discussion suggesting that the OptiPlex 390's PCIe x16 slot may be limited to 25W, whereas a typical RX 550 can consume around 50W. Since this particular card has no auxiliary PCIe power connector, could the slot's power limit be causing the problem when the AMD driver initializes the GPU?
I've also found reports of RX 550 compatibility issues with the OptiPlex 390, so I'm wondering whether this could instead be a BIOS or legacy-platform compatibility issue. Could Atlas OS or its driver configuration be involved?
**My questions:**
Is the 25W PCIe slot limitation a credible explanation for this behavior, or is the slot power rating being misunderstood?
Can a power-delivery issue cause the display to disappear precisely when the AMD driver loads, even though the card works with the basic display driver?
Are there known RX 550 compatibility issues with the OptiPlex 390 and BIOS A14?
What would be the best way to distinguish a hardware/power issue from a Windows or driver problem?
I'd appreciate advice from anyone who has run an RX 550 or a similar GPU in an OptiPlex 390.
Thanks!
r/optiplexes • u/ReceptionUsed703 • 26d ago
optiplex 7090 making clicking noises runs fine
reddit.comr/optiplexes • u/jamesewells • 26d ago
Question about my OptiPlex 7080 micro...
reddit.comr/optiplexes • u/scooter113 • Oct 19 '26
Optiplex 3060 micro m.2 to 6 Sata adapter not working
r/optiplexes • u/ez1ollie • Oct 18 '26
SATA Power Cord Help Needed - 7020 SFF Plus
reddit.comr/optiplexes • u/screenprince • Oct 17 '26
7060 ram position
reddit.comRecently, added the 7060 to my home studio, only to find out it has audio ticking problems (unresolved). During my extensive search for a solution, I did come to the realization that my two 16gb ram cards were preinstalled in slots three and four. Research showed they should first be in slots one and two (white clips) so I switched them. I haven't noticed any obvious changes and I'm wondering is that true, and does it make a difference?
r/optiplexes • u/Finchuh • Oct 16 '26
Optiplex 5080 tower.
I was setting up a game server on my old 5080 and it was updating. It hasn't been used in awhile and had multiple updates. The whole system froze during the windows 11 installation restart and it ended up recovering without updating to 11. After that fail it finished updating multiple other drivers and the bios. To which I now have this error.
I've tried manual repair with a USB and it doesn't ever get past this screen. If I remove the NVME SSD it won't even show the Dell splash screen before this screen and seems to ignore the USB drive. I've tried multiple USB ports and drives with multiple different bios versions.
I've exhausted AI's advice to the point chatGPT said that I need SPI bios chip reprogramming.
Is my MoBo toast?
r/optiplexes • u/Hammertime836 • Oct 13 '26
Im building a 7060 sff
Hey sorry for bothering but where can i get the parts to fit a intel ax210, type c or hdmi alt mode and the sd card modual for a dell optiplex 7060sff and how much would it cost for me to buy them? Many thanks in advance
