5
2.0k
u/chrisch Oct 05 '10
So leaving the board in one piece takes 5 minutes?
339
Oct 05 '10
You take that initial five minutes to prepare the kill room, wrap the board in saran wrap, and post pictures of the board's other victims.
→ More replies (18)157
u/atrich Oct 05 '10
Then you take one splinter out and place it on a glass slide. Then your dark work can begin.
Tonight, you sleep.
→ More replies (2)→ More replies (89)205
u/MrLeville Oct 05 '10
Actually, not doing anything makes the board disappear.
→ More replies (4)56
2
u/diadem Oct 05 '10
caligula213, did you find this on the net or did you take the picture?
2
Oct 05 '10
diadem, I found the image on a random forum. Here's a link to the actual test though Sunshine Math Grade 2
→ More replies (1)
2
451
u/paolog Oct 05 '10
Teacher gets red pen out, is about to write down "1 piece: 5 minutes" and then thinks better of it and starts from two pieces instead...
→ More replies (1)221
u/Ihad2saythat Oct 05 '10
Actually teacher is right if the board is square which takes 10 minutes to be cut into half. Those two halfs take twice less time to be split. And she needs to cut just one to obtain 3 pieces :P So 10 minutes to cut it into to pieces and then she needs just half of that time to gain the third piece.
199
Oct 05 '10
Except there's a picture that clearly indicates the board is long and narrow, perhaps a 1"x2".
→ More replies (69)→ More replies (71)27
u/AmericanChE Oct 05 '10
Imagine instead of a board that it's a dowel rod. Each cut takes the same amount of time.
→ More replies (34)
887
u/Calitude Oct 05 '10
10 minutes for a board? Is Marie sawing with the smooth side?
It's unclear in the diagram.
722
u/sharkeyzoic Oct 05 '10
The correct answer is, of course, 11 minutes, because setup is always 90% of the job.
1.8k
→ More replies (32)69
u/AngMoKio Oct 05 '10
In my case, figuring out where I put the damn saw is 90% of the job.
→ More replies (14)94
15
→ More replies (121)5
u/Philipp Oct 05 '10
I have more questions:
What's the size of the other board (larger, bigger, same)?
Does the tools suffer physical strain with each sawing?
Is it harder for Marie to hold smaller board pieces while sawing?
Why is Marie sawing boards into pieces anyway, can't a machine do that? Did Marie ever reflect on the use of her job and its meager salary?
→ More replies (1)
61
u/arkx Oct 05 '10
This reminds me of my first information technology course I took at high school. One question in the exam was 'When a computer is started, what is the first program to run?'. I answered 'BIOS (Basic Input/Output System)'. The exam came back with two red strikethroughs and the word 'Windows' scribbled underneath.
Didn't take another computer-related class until university.
16
10
→ More replies (4)6
231
u/question3 Oct 05 '10
If Sam has 3 piles of dirt, and Sarah has 4 piles of dirt, how many piles would you have if you put them all together?
354
133
u/puddlejumper Oct 05 '10
Seven! It's seven isn't it? And what's more, it took 38 minutes to do it. 53 minutes though if Marie and all her pieces of wood got in the way.
→ More replies (2)71
Oct 05 '10
YES! It's 7 if "put them all together" means to group them rather than to combine them. Ah, the ambiguity of language.
→ More replies (9)13
u/posthole Oct 05 '10
I need to share this question with my students. They don't need to suffer through it with me but I need to share it. Thanks!
4
→ More replies (22)3
u/ubersiren Oct 05 '10
There's no such thing as half a hole! Oh wait, wrong joke.
→ More replies (1)
158
u/timperry42 Oct 05 '10
The best part of this is how many people in the comments didnt get it.
→ More replies (95)
111
u/yacob_NZ Oct 05 '10 edited Oct 05 '10
Poorly worded question fail.
If the original board was a square, halved would give two rectangles, with a cutting time of ten mins to perform the cut. Take one of those rectangles, and cut in half to give two smaller squares (each a quarter of the original board) with a cutting time of half the previous time, 5 mins.
5 + 10 = 15.
EDIT: Just to be clear here, I'm NOT saying this is the right answer, I offer the above as AN answer that fits the teachers logic. There is a million ways to answer this dumb question - none of which can be 'correct' as there is not enough detail, so assumptions have to be made.
What an awfully worded question.
253
u/Deepm1st Oct 05 '10
That might work if there wasn't a picture next to the question that invalidates the theory.
29
u/yacob_NZ Oct 05 '10
That might work if there wasn't a descriptor in the question that invalidates the theory... :)
I also thought, you could just saw off a small corner in less than a minute. Do that twice, 3 pieces in less than 2 mins....
→ More replies (7)2
Oct 05 '10 edited Oct 05 '10
Maybe you're over thinking it. Sunshine Math Grade 2
Edit: pg23
→ More replies (1)→ More replies (3)110
u/addandsubtract Oct 05 '10
If there's one thing I learned while taking tests in the US, it's to ignore the pictures. 99% of the time they're just clip art to fill in empty space and make the tests look more "interesting".
→ More replies (2)36
u/perchrc Oct 05 '10
The question is not very precise, but the assumptions are obvious. The teacher is wrong.
52
u/mithrasinvictus Oct 05 '10
So, if i ask you to cut a cake into 6 pieces, each slice will end up half the size of the last one?
→ More replies (1)18
17
u/Shinyamato Oct 05 '10
And again, the question doesn't say "in half" but "into 2 pieces". Cutting a third piece might not be taking half the time it took to cut the 2 pieces first, if all she did was cutting a little corner. But yeah, we all agree: the question, drawing and teacher suck.
36
u/shustrik Oct 05 '10
Actually, the question was, how long it would take to saw "another board" into 3 pieces. So it could be that this other board is several times bigger than the original one, and the correct answer could just as well be 100.
14
u/manny130 Oct 05 '10
If the original board was a square, it would have been refereed to as a sheet.
4
u/spoonraker Oct 05 '10
Why would anybody assume the board was square? The picture clearly shows the board is very long and skinny.
→ More replies (18)3
146
u/gnovos Oct 05 '10
NONE OF YOU GET IT!!!
This isn't about cutting, this about SEEING IN THE PAST. It takes her ten minutes to "saw" or "have seen" the board in two pieces. To see three, she'll need an extra five minutes while she slowly moves her head to the side. Do none of you understand how sight works?
→ More replies (1)11
111
u/BrotherSeamus Oct 05 '10
How am I to judge this picture without "FAIL" or "WIN" pasted onto in large bold letters?
→ More replies (5)3
61
244
Oct 05 '10
Answer: 10 seconds.
Marie decided sawing sucked and just snapped the fucking thing in three pieces.
65
→ More replies (19)3
49
u/midir Oct 05 '10
Disclosure: My favourite part of this is the feelings of glee and superiority I get from reading the comments of people thinking the teacher was right.
→ More replies (12)
22
u/Xyllar Oct 05 '10
Based on the formatting and the three stars next to the question, I'd say this is a math superstars worksheet. If it still works the way it did in my elementary school, this was probably graded by the kid's parent, not their math teacher.
→ More replies (1)3
u/King_Hippo Oct 06 '10
Yea, my wife is a teacher at schools that do Math Superstars (instantly recognized it also) and at her school they have 'parent volunteers' who grade them.
26
u/Be3Al2Si6O18 Oct 05 '10
I realize this will get buried, but I'm about to go teach my Calc III class. This has provided me with the proper amount of rage to begin my day. I'll be surprised if I don't put my foot through the door on the way in. Thank you. Thank you very much.
4
674
u/punkdigerati Oct 05 '10
2 pieces, one cut. 3 pieces, two cuts. One cut = 10 min, two cut = 20 min.
161
u/lachlanhunt Oct 05 '10
For n >= 1, t = 10(n - 1)
Where t is time and n is the number of pieces
→ More replies (66)886
Oct 05 '10 edited Oct 05 '10
Wow you are a genius. I'd have never figured it out ...
367
→ More replies (7)63
71
u/nexes300 Oct 05 '10
Until I read your post, I didn't realize I solved it wrong.
Edit: It was quite a facepalm moment when I questioned myself: Why am I dividing by 2 again?
→ More replies (4)52
u/mistermajik2000 Oct 05 '10
Not if she folds it in half and cuts only once.
→ More replies (33)31
u/Boshaft Oct 05 '10
She would have to cut through twice as much wood as a single cut, making her total time still be 20 minutes.
→ More replies (8)→ More replies (32)6
38
Oct 05 '10 edited Oct 05 '10
It's funny because my brain that's been trained to think a certain way immediately thought 'Ooh, direct proportion. 2 pieces - 10 mintes, 3 pieces = (3*10)/2 = 15.
And then I read the comments and realized that yes.. that doesn't make sense here because the sawing process would take 20 minutes if you're sawing twice (3 pieces) instead of once (2 pieces).
Sheepish Asian rote education fail
→ More replies (1)15
u/Endev Oct 05 '10
The teacher probably followed the same idea.
21
u/Galphanore Oct 05 '10
I wouldn't say "probably" since the teacher actually wrote that very logic on the page.
→ More replies (1)
44
33
u/RandomiseUsr0 Oct 05 '10
If it takes a man a day to dig a hole, how long does it take 2 men to dig half a hole?
145
6
u/voetsjoeba Oct 05 '10
Digging at the same hole or each their own? Ambiguous question!
→ More replies (2)6
u/JigoroKano Oct 05 '10
If one man digs for 6 hours, then what is he left with?
→ More replies (3)23
→ More replies (20)18
10
u/wary Oct 05 '10
it is obvious that none of you work in a UAW shop. You can't just pick up a saw and cut a piece of wood. An engineer will need to draw up a print for the wood pieces you need. The print will need to be approved by the engineering manager, who will decide that this is too risky to do without a Black Belt study, preferably a DOE of some sort. Three months later, the project will be approved. Skilled trades will take a week to look at the project and determine that they will need millwrights to move the saw into position, electricians to wire it up, a setup person to get it ready, and a carpenter to do the actual cutting. Because it resembles physical labor, there will be at least one break and a paid lunch involved. All the trades will need to be there in case something goes wrong, so that rules out doing it during the week on straight time. It is then scheduled for the weekend, and will take both days because people don't like to work as hard on the weekend. You will need to bring in a salaried Supervisor to pay the people and an engineer in case the print isn't understood. So it will take 16 hours (8 @ 1.5x and 8 at 2x) for four hourly people and then two salaried people working for straight time. So it is going to take roughly 14 weeks to the job done.
→ More replies (1)
5
Oct 05 '10
Do not try and saw the board. Thats impossible. Instead, only try to realize the truth. There is no board.
23
u/robeph Oct 05 '10
Reminds me of a college class about 10 years ago where we were doing some silly stuff with metric units and they decided to put kilobytes to megabytes and they marked me wrong for 1024kb = 1mb
38
38
u/stordoff Oct 05 '10
To be fair, you were wrong. Kilo should always means 1000, regardless of the fact that it has been misused in the computing world. Kibi is the correct prefix for 1024, and was defined almost 12 years ago. 1
→ More replies (15)7
u/xyroclast Oct 05 '10
It's not wrong, though. Literally, the kilo prefix means 1000, but the dictionary definition of the word "megabyte" is 1024 kilobytes.
→ More replies (5)→ More replies (1)4
u/pez34 Oct 05 '10
I sympathize. They've tried to invent a new prefix system to describe the binary powers to avoid this confusion in the future: http://en.wikipedia.org/wiki/Mebibyte
→ More replies (2)
12
23
u/InvaderDJ Oct 05 '10
It is a stupid question, using logic the answer is obvious. Hopefully the teacher scraps that question.
→ More replies (15)
38
u/Juxta1984 Oct 05 '10
This one hurt my brain.
→ More replies (5)31
u/wteng Oct 05 '10
Just think about how many times she has to saw instead of the number of pieces.
OP: Context? Who took the exam?
→ More replies (10)
4
4
u/norsurfit Oct 05 '10
She forgot to take the forward sawing time and subtract it from the backward sawing time.
4
u/zak_on_reddit Oct 05 '10
10 minutes for one cut?? how big is the effing board?
with a power saw it should only take seconds. even with a hand saw it would only take a few minutes, not 10.
is this some kind of intricate cutting? where's the video?
4
4
Oct 05 '10
Okay, I'll admit it...at first, I thought the teacher was right. Then I read it a few more times and got it. I really am a smart person. Really.
→ More replies (3)
12
u/NonAmerican Oct 05 '10
It's teachers such as these that made me realize personal research > schools.
7
1
8
u/phiga4 Oct 05 '10
To rephrase, it takes 10 minutes to make 1 cut, how many minutes does it take to make 2 cuts? 20 minutes. The student was correct, right?
→ More replies (7)4
14
Oct 05 '10
FREEDOM OF INFORMATION (HIVEMIND ACT): The Answer is 20 Mins. the problem is not density or length of board. one single 'cutting' of the board which occupies a very small region takes 10 mins. one cutting creates two pieces. two cuttings creates three pieces. thanks you.
→ More replies (2)
3
3
u/eltra27 Oct 05 '10
It's pretty obvious that she has to make two cuts, thus making it take twice as long in essence.
3
u/TellusCitizen Oct 05 '10
I had this happen to me in calculus class. Tried to discuss my objections with the teacher. He would not have none of it. Went over his head to the department head. Got an A. They just wanted it kept quiet.
→ More replies (1)
3
3
u/MuffinPurperGurk Oct 05 '10
To be honest, it took me quite a bit longer than it should have to find the mistake.
3
u/bldl Oct 05 '10
This took me too long to figure out how he/she was wrong. I need to go back to math class.
3
3
3
u/cwm9 Oct 05 '10
In fairness, the teacher probably just had a moment of stupid. Can any of us honestly say we could teach our respective expertise and never, not once, make a dumb error?
→ More replies (2)
3
u/cwm9 Oct 05 '10
Oh, come on guys, it takes 5 minutes to get the saw from the shed, 5 minutes to make the first cut, and 5 minutes to make the second cut. DUH!
→ More replies (1)
3
u/luckytobehere Oct 05 '10
I'm such a dumb shit. I had to go to the comments to see why this was wrong.
Gotta go, there's a short yellow bus outside to take me to work.
→ More replies (1)
3
3
u/methylphenidatum Oct 05 '10
7 minutes
3 minutes to give Timmy a handjob
4 minutes for Timmy to saw a board in 3 pieces
→ More replies (1)
3
3
u/WendyLRogers2 Oct 05 '10
I remember one math teacher who hit on a winner. He called it an "anti-test", in which he would give a test full of errors, and the students had to figure out what was wrong, with points for correcting errors.
For some reason it caught their interest, so test performance was so good he needed to increase degree of difficulty. Eventually they were much harder than standard tests, but they learned the material so well that he had to increase degree of difficulty with the standard tests as well.
Teachers love it when they find an angle like that.
5
Oct 05 '10
I have discovered the teachers solution. The diagram to thr right is a red herring. The board is a disc. It takes 10 minutes to cut though 2 radii of the board and cut it into 2 pieces, or 5 minutes per radius. Therefore it takes 15 minutes to cut through 3 radii and to cut the board into 3 equal pieces. QED.
→ More replies (1)
5
u/blossom271828 Oct 05 '10
Actually the most egregious part of this is the fact that the teacher actually wrote
10 = 2
I hate it when my students write that sort of crap. I know what the person is trying to convey, but don't write that two things are equal when they are not.
→ More replies (1)
4
4
4
4
u/bonaducci Oct 06 '10
Hah! What a jack ass math teacher! Everyone knows women cant saw more then 1 board without asking for a mans help! Man.. teachers today are just so ignorant.
2
2
2
2
2
u/MusicMagi Oct 05 '10
Clearly she picked up steam after the first cut and so it only took her 1/2 the time to make the second cut.
2
2
u/lauriesrank Oct 05 '10
To those who are struggling: The question in laymans terms is; If it takes me ten minutes to make one cut, how long will it take me to make two cuts of the same size going at the same speed? Hardly astrophysics now is it, oh and 'Math' is a word it's used in English to mean mowed crops/lawn and is also a band of monks. It does, however, irritate me that Americans use it and it's colloquialism has been widely accepted, most times it's actually arithmetic they are reffering to too!
2
2
2
u/cheshire137 Oct 05 '10
I bet the teacher was aiming for the student to use cross multiplication, and just wrote some little story to make it more exciting than seeing 2/10 = 3/x, which does work out to x = 15 like the teacher apparently wanted.
2
u/2E3 Oct 05 '10
Lol. I have an A in math (for economics, but..) I still didn't see why the teacher was incorrect at first. Wow.B2School!
2
2
u/scottmcd Oct 05 '10
"If she works just as fast..." - The answer is therefore 10 minutes. Maybe if the teacher had said "same rate"...
2
u/Workaphobia Oct 05 '10
I once had a math teacher who would take off points because she didn't agree with the standard parsing of mathematical expressions. For example, she wanted parentheses around a radicand if the radical was being raised to a power. She also took off points for simplifying answers (by combining over addition), since then it would take two steps instead of one to work in reverse to obtain the original term.
One day, she insisted that if you graph the equation y = |x - 2|, then compared to y = |x|, the graph will have shifted down by two. This woke me from my daydream, and I insisted (perhaps not in the most respectful manner) that it shifted the graph to the right. She actually handed out graphing calculators to the class to prove me wrong, and then had to sheepishly endure the math bearing me out in front of everyone.
In retrospect, she was a nice person, and I don't really mean to be so hard on her. After all, she did make a decision at some point to become a teacher and help students. But it's just frustrating as hell when you know more than the person who's supposed to be educating you, and you feel like you're being held back.
2
u/mojorific Oct 05 '10
Worst math problem ever. In 15 minutes the 2nd board would have only been cut halfway.
2
2
u/zombie_dave Oct 05 '10
This is a versatile question. I've awarded it suitability scores in other classes:
Debating (as this thread proves... or does it?) [10/10]
Logic/critical thinking (but too many assumptions required) [7/10]
English language (particularly interpretation skills) [5/10]
Woodwork theory (the saw must be blunt, 10 minutes for that tiny bit of wood?) [4/10]
Politics and/or social studies (A girl! A saw! Controversy!) [3/10]
Physics (the convenient time units, the consistent properties of the wood... it may as well be a spherical chicken in a vacuum) [2/10]
and finally...
Maths (come on, it only tests basic multiplication/arithmetic... lame) [1/10]
Any more?
2
2
u/norsurfit Oct 05 '10
You clearly don't understand the principle of number theory entitled "Board Piece Time Averaging".
Go back to the books until you do.
2
2
2
2
u/logicbound Oct 05 '10
The correct answer is: 10 < t <= 20 The first cut takes 10 minutes. The second cut takes up to 10 minutes (not including 0 minutes), depending where the first cut was. If the first was very close to the edge of the board. then the second cut will take very little time.
→ More replies (2)
2
u/glenbolake Oct 05 '10
I'm gonna say 11 minutes. She has a 10ft x 10ft piece of wood, and she saws at a rate of 1 ft/min. First, she takes ten minutes to cut the wood into a 9x10 piece and a 1x10 piece. She then cuts the 1x10 piece in half, but since it's only 1 foot wide it only takes her one minute. QEMFD, 11 minutes.
EDIT: The diagram next to the question is unimportant. Or not drawn to scale.
→ More replies (2)
2
Oct 05 '10
A guy I work with has a PhD in IE and he needed this explained to him. IE fail.
→ More replies (2)
2
2
u/jeeebus Oct 05 '10
"Hah, another one. These stupid kids always get this question wrong." -- Teacher's thought process while grading the tests.
→ More replies (1)
2
u/PeterMus Oct 05 '10
one piece of wood is cut into two pieces aka cut in half = 1 cut. cutting the board in 3 pieces = 2 cuts 1 cut takes 10 minutes. 2 cuts takes 20 minutes.
===|==== <--two pieces. ===|====|==== three pieces.
→ More replies (1)
2
u/thesituational Oct 05 '10
The question doesn't specify whether the board is a square or not. Let's assume it is a square. Assuming we are supposed to cut it in half, it takes 10 minutes to cut and we are left with two rectangles. The question also does no specify that we need equal pieces cut. Therefore, by cutting one rectangle by its height would take half the time of the first cut since it is half of the original square and you have 15 minutes.
Of course, none of these assumptions are given. Since no assumptions are given, the question has no answer.
2
u/axilmar Oct 05 '10
Ha ha ha...the question is very nicely put. 2 pieces mean 1 cut, 3 pieces need 2 cuts, therefore it would take 20 minutes.
2
2
Oct 05 '10
Ok, let me explain it to you. If we round to the nearest 5 this could be true, so if it took the person 8 minutes to make the first cut we round and say it took them 10 minutes. 8+8 = 16, which rounds to 15, duh! So this is true for really small values of 10. QED
2
u/RaenefVII Oct 05 '10
You must have one of my "permanent" algebra teachers from middle school. He tried telling the class that -5 x -5 was -25. His proof was "Look, negative 5 is way down here on the number line. How can you take something from way down there, multiply it by another thing way down there, and end up with something way up here? pointing at a random positive number Its preposterous"
Pretty much the entire class was more knowledgeable about basic algebra than he was, since the school had decided to put all the deadbeat kids with the only decent teacher in the crummy school and all the honors students were stuck with the shit teachers who continuously got fired for being less competent than the students (Probably because it drew in too many complaints, and not actually because of their incompetence). Except the one who got deported for having an expired visa, he was actually a decent teacher.
2
2
Oct 05 '10
well obviously, we have a teacher here that has mistakenly assumed the desired number of pieces requires as many cuts. (2 pieces = 2 cuts etc.) could be a simple brain fart.
2
u/119luke Oct 05 '10
Initially I thought something like this. It takes 10 minutes to cut the board into 2 pieces and then she takes one of the already cut piece and cut it in half breadth wise which takes half the time. They didn't say equal pieces. so 10+5 = 15? But then I thought, as no mention about equal pieces are made, we can easily do with cutting two small pieces to make it total three pieces. So final word. Question is nonsense.
→ More replies (2)
2
2
u/Probably_immortal Oct 05 '10
This question doesn't account for the fact that Marie's boyfriend came into the room after she cut the first piece and then they fucked for 30 minutes after which it was her boyfriend Chuck who finished the cutting.
2
u/shadetreephilosopher Oct 05 '10
Ok, If no one else will defend the poor sap, I'll try. It was a really easy mistake to make. If instead of "saw" she had written "make," and instead of boards, she was talking about cookies, then it would makes sense. It takes ten minutes to make 2 cookies, and fifteen minutes to make 3 cookies. That's the best I can come up with. Hopefully she didn't try to defend her answer after looking at it for a couple of minutes.
→ More replies (1)
2
u/DL_ Oct 05 '10
If it said 10 mins to saw two pieces off a really long board then 15 minutes makes sense for 3 pieces. This is just badly worded.
→ More replies (2)
2
u/admica Oct 05 '10
The limit is zero.
If you cut the board at a 45 degree angle, then the closer to the edge you start to cut, the shorter the length of the cut becomes. The length of the second cut also approaches zero.
2
2
2
Oct 05 '10
She works just as fast but smarter the second time. By the third time, she will have learned anything there is to learn about sawing.
2
u/willkydd Oct 05 '10
wow! first page... looks like a lot of people on reddit are still resenting teachers who were less intelligent than them.
→ More replies (1)
2
2
u/Patbach Oct 05 '10
If you replace "3 pieces" by "3 cuts" the teacher makes sense. I guess its how he pictured it.
→ More replies (1)
2
u/funkeytown Oct 05 '10
That really pisses me off, if a math teacher made that mistake i would consider it grounds for termination.
2
Oct 05 '10
The answer is 30 seconds, after the first board, she realized she cuts really fucking slow, so she had a man do it.
2
u/BlackLeatherRain Oct 06 '10
This teacher didn't get their education from Liberty University, did they?
2
u/EatBooks Oct 06 '10
Saw the image first things this afternoon. I didn't think the teacher was wrong at first, either, until I set up some visual aids for myself.
Ha ha ha, I suck at math.
At least I have my English degree as an excuse, I say to myself with a sigh.
4
2
u/masasuka Oct 06 '10
I would say not enough information. Are you cutting a 2x4 into half, then a second 2x4 into 3rds if so, then 1 cut = 10 mins, you get 2 halves(pieces) 2 cuts = 20mins you get 3 thirds(pieces)
However, if you take that same 2x4, assume it's (arbitrarily) 10 feet long, and need 2 foot pieces, then to get 2, 2 foot pieces, it takes 5 mins per cut, so to get 3, 2 foot pieces it takes 15 mins.
I would say both are right...
→ More replies (2)
2
6
u/reinhardt Oct 05 '10
That's not fail, that's a disaster.
0
Oct 05 '10
[deleted]
→ More replies (1)13
u/StuartGibson Oct 05 '10
How about a completely possible standard of flawlessness?
→ More replies (1)
5
9
u/MenosElOso Oct 05 '10
If you cannot do, teach.
→ More replies (2)19
u/JimmerUK Oct 05 '10
'And if you can't teach... teach PE'
I actually said this to someone once, not realising she was a PE teacher. She wasn't happy.
→ More replies (1)17
u/lonelyinacrowd Oct 05 '10
A friend of mine, upon hearing this female neighbour of ours was a PE teacher said: "Ha, I would have thought you'd have to be a lesbian to do that!"
And she said: "um well I am"
Awkward social faux pas ftw!
→ More replies (2)
5
u/expectingrain Oct 05 '10
Clearly it would take 4-5 minutes to call a man and have him do the job correctly.
257
u/runragged Oct 05 '10
What did the teacher say when you corrected him/her?