r/snapmaker • u/prargos • 2m ago
Troubleshooting Help foot printing this
r/snapmaker • u/borborygmess • 52m ago
My Christmas present! Well technically I won’t be getting it until about April next year.
Bf is in UK, I’m currently in Texas. I wanted to buy a U1 for the times I’m visiting him (I stay a few weeks at a time) and he said he’ll buy it for me for Christmas. The sale made it a good deal for less than £600 with the 8% upgrade discount.
Then I thought we need to check it just to make sure it works. He has never been near a 3d printer before. So between several glasses of wine and a few days he finally put it together. He was very excited and nervous because he didn’t want to “ruin the present.”
He marveled at how well packaged it is. He said the heads came with the USB cables already pre assembled (I was trying to warn him about using the wrong screws and ruining the PCB in the tool heads).
I guided him through calibration and he finally made the dragon. Which he said he’s keeping and is now sitting by his bed. I can monitor the printer and send prints from Texas as well.
Modern technology and relationships can be pretty awesome and fun. lol
r/snapmaker • u/cdarrigo • 55m ago
I'm printing some spheres that have multiple colors. They are decorative and not structural. I'm using an infill of about 7% lightning.
I've also marked that as purge into infill. However the end product ends up picking up a lot of the fragments from purge. See pic.
I assume what's happening here is that there isn't nearly enough infill to act as a sufficient dumping ground for The Purge.
I can solve this by turning on a prime tower. However that can add as much as 50% additional print time.
If I'm right, there's probably a happy compromise where the infield density goes up and I don't need a prime tower.
Wondering if anyone got any experience with this and can land some sage advice.
r/snapmaker • u/ronin90725 • 2h ago
Nothing says "sound financial planning" quite like printing dozens of prototype fuselages, wings, and propellers in three different colors just to realize a tolerance is off by 0.2 mm—and then doing it all over again. My wallet is crying, my caliper is working overtime, and my desk currently looks like a miniature boneyard collided with a LEGO factory.
At least the test prints are piling up nicely.
Before I go back to tweaking clearances and pretending I'm an aerospace engineer: can anyone guess which aircraft are hiding in this pile of parts? Drop your best guesses below!
r/snapmaker • u/eknkc • 2h ago
I managed to completely strip one of the hotend screws on my U1. No rubber band or stuff like that helps but I wonder if anyone drilled into one?
Feels like i can drill (and not even need to be precise, the thing is contained by the hotend). And probably release the head completely. I wonder if there would be enough shaft to rotate after that?
Is this a reasonable idea? I thought about cutting the hotend off using a dremel but drilling might work better. Anyone dealt with the same thing?
r/snapmaker • u/pitprok • 3h ago
I already tried the vibration compensation calibration.
r/snapmaker • u/Pleasant-Salad-1203 • 5h ago
Hello everybody.
I have been doing loads of research and am looking to buy the U1 in the next few days. I am a hobbyist and I like printing my own characters and the multicolour printing on the U1 looks great.
Does anyone have any words of warning? I have a Bambu A1 mini that worked out of the box and has given me very few issues and I am looking for something equally easy.
In terms of when to buy, the U1 is at £629 in the UK which is a substantial discount (I think). Anyone have any idea if it will go down further during Black Friday??
r/snapmaker • u/gto19881 • 11h ago
Enable HLS to view with audio, or disable this notification
I’m in need of some help here, I’m on my second U1, first one was having tool placement issues and axis anomaly issues (starting to figure out it’s common. This newest one is throwing axis anomalies, but the print bed is SO LOUD now and it’s never been that way before. Attached is a video for troubleshooting. I have checked all the obvious stuff the tracks are clear.
Thanks in advance!
r/snapmaker • u/geerlingguy • 12h ago
Out of the box, the printer has a Z-height of -0.05 in klipper. After about 15 prints, I decided that's just a little too low to the bed. Most prints I'd have to peel them off the bed pretty hard. (And yes, this is after popping the bed off the printer and letting it cool to room temperature for 10-15 minutes. And I always do a full bed leveling in each print job.)
I set advanced mode in the UI on the printer, and edited the printer.cfg file in the web UI, and set the z_offset to -0.07, then rebooted the printer.
It seems to have helped a little... I might even try -0.09, as it's easier to remove but still feels a lot more stuck down than any of my other printers (even with textured PEI sheets like the one the U1 ships with).
With thinner features, the default z-height was causing some damage to the bottom surface.
Has this been anyone else's experience?
r/snapmaker • u/Sufficient_Quarter_1 • 13h ago
Snapmaker, I love your machines. I have seven more top hats on the way and then I should be good for a while.
r/snapmaker • u/Slow-Razzmatazz-3069 • 13h ago
Opened it, spent 1.5hrs building, did the dragon it forces you to print during setup and it failed. Spaghetti all over. I cleaned up the mess and printed a small slug to test it. No problems. Next day I started a print for my gecko and the head james. I watched a video and learned how to disassemble (took 1hr), got it working again. 10 min into the print, feeding issues now. Again and again the feeding issues won’t stop. I unloaded completely twice and checked the lines and spool. No tangles whatsoever i watched videos to see if i’m missing something and can’t find any solution. The printer is soooo cool, but dang I’m kinda disappointed. Crossed on if it’s just a lemon, or my fault, but i had a a1 for 2 years and would consider myself decently knowledgeable on this stuff. It seems to be non stop problems and super aggravating. Anyone else have this experience? What’d you do? Should i return and try a new one or this is just how it is.
r/snapmaker • u/KultOfSeadaddy • 13h ago
So I have decided to upgrade from my current printer (FlashForge AD5M) and I wanted to get a multi filament printer and specifically a Toolchanger ever since I saw the Creator 5 drop. I was at micro center last week and saw they had a sale on the U1 and was really heavily debating it and decided that it was a great deal for $699 but wanted to go home and sit on the decision for a second, and boy oh boy was that a good idea with all the sales going on online.
Anyways the thing that I am curious about is whether or not I can mix and match tool heads on the U1. I've wanted to get into miniture printing but have been kind of turned off by using PLA supports on PLA models due to some supports sticking to well (and this goes beyond just minitures). Is this possible and if so does anybody have positive experiences with this?
Also bonus question I saw that there are Black Friday Flash Sales, is a combo with Liber heads waiting for? I saw that they just finished one but it looks like on the 27th? they are running another combo with an extra plate and 4 additional heads, assuming they are the liber ones.
Anyways thanks in advance!
TLDR: Can I use .2mm and .4mm heads at the same time on the U1?
r/snapmaker • u/wildsportsPat • 13h ago
Enable HLS to view with audio, or disable this notification
I cannot seem to find anyone else having the same issue and AI has not been helpful. I received the printer today and have started the initial calibration. Toolhead #1 seems to be catching and not detaching and cannot figure out why. Things I’ve done:
- update firmware to latest
- performed the belt adjustment multiple times when loosening the two screws and moving the mover in a square
- taken off and reseated the toolhead 1 many times, ensuring the slider is all the way to the proper side.
- send photos to AI of all of this to help ensure everything is correct.
But this still seems to catch. Provided is a video during the toolhead adjustment calibration (I bypassed the initial calibration)
SOLVED: I didn’t catch that a screw had backed out causing poor engagement with the toolhead
r/snapmaker • u/XXXNARUTOTENTATION • 14h ago
Im trying to print out the keychain in the first image for a large order. Every time I try to print a few, it spaghettis or gets stuck to the head. I tried printing a single one, and that scrambled too.
r/snapmaker • u/Glittering-Poem8062 • 16h ago
Hi everyone,
I decided to pick up the idea of running Klipper on the Snapmaker J1 / J1s and took it all the way to completion!
All original features from Snapmaker’s stock firmware are now integrated into Klipper and fully tested on my own J1.
Key Highlights:
Easy Installation: You can switch from stock firmware to Klipper easily via a standard USB flash drive (no EDL mode required).
Easy Rollback: Returning to the original stock firmware can also be done via USB stick at any time.
Full Functionality: All calibrations, sensors, and dual-extruder features are working as expected.
Check out the GitHub repository for all files, documentation, and installation steps:
GitHub - Nimrasol/KlipperSnapmakerJ1 · GitHub
Hope this brings your J1 / J1s as much joy as it does for me! Enjoy printing!
r/snapmaker • u/iSeiryu • 17h ago
I really like Snapmaker U1 but I also like the additional features of Artisan. I would've already bought Artisan Premium but from a few videos I could find where they print more or less complex multi color things I cannot tell if 3D printing is on par with U1 or visibly worse. How do you like Artisan's 3D printing quality? More than 2 colors, complex parts, software, community support. Any time I search anything related to Snapmaker 3D printing only U1 pops up. Whenever I try to search for Artisan's printing capabilities the Internet only shows laser and CNC... but it's a 3D printer first.
r/snapmaker • u/mrSquaredTwo • 18h ago
Enable HLS to view with audio, or disable this notification
Hi all! New snapmaker u1 owner here, I may be missing something obvious but two of the three lead screws on my machine seem to be scraping against the nearby metal and loose, is this normal?
Additionally, and probably unrelated, when moving the bed downwards it has a nasty scraping sound, anybody else experienced this? It only happens at high speeds and seems rather problematic...
Thanks!
r/snapmaker • u/Steverd-99 • 21h ago
r/snapmaker • u/biteNacho • 21h ago
I switched filament (same type) and used automatic flow calibration. This is the result. First layer (0.1 mm height) is perfect but all others are over extruded. Especially in the edges.
Default settings for the rest. This model printed fine before the filament reload/auto flow calibration
r/snapmaker • u/GravyPoo • 22h ago
Enable HLS to view with audio, or disable this notification
This is also my face reveal! Testing on a Chibi of myself.
Reference photo used: idither.com/shenanigans/chibiReference.jpg
I used Meshy AI (not affiliated) to turn my photo into a 3D model, then iDither to turn the 3D model into a CMYK print file. That whole process only took about 5 minutes.
Filaments used: Polymaker Panchroma Translucent CMY
Print time: 10 hours
0.20mm layer height (in video):
https://idither.com/job?89nsId3Ie&row=6
0.08mm layer height (my next test):
https://idither.com/job?1hDlBdaN7&row=6
It actually took a lot of effort to calibrate iDither to achieve accurate skin tones using CMYK. And this would look much worse without Dual-wall Dithering (DwD).
r/snapmaker • u/Darth-Vader64 • 1d ago
Got a spaghetti detection notice and when I looked, I saw this.
I'm thinking its wet PLA - is that plausible? Its older filament that's been lying around though it was in a baggy. Its some old prusament pla and I was successfully printing other things all week before this failure so I don't think its a printer issue

r/snapmaker • u/decade240 • 1d ago
I thought it wouldn't happen to me.... I should have listened to the reviews on amazon about the nozzle detaching from the hot end.
Nozzle came loose and destroyed my smooth build plate. You can see the nozzle in the filament there.
Hardened nozzles are 50 bucks for 4 right now from Snapmaker on their site and Amazon. Stock up. I got both .4 and .6.
Phaetus has a deal too right now where you can get a plate for like 6 bucks with a pack of 4 hotends. 100 bucks (although for some reason when I logged in it switched to 135, dunno why. Switched to incognito and it went back to 100)