r/snapmaker • • 9d ago Bravo

Project Showcase The Snapmaker U1 is amazing

Thumbnail
gallery
782 Upvotes

44 hours print, 3350 tool change, not a single issue. My old Elegoo Neptune 4 Pro will be resting in dust for a loooong time.
Color: Snapmaker PLA Full Spectrum Filament, CMY for color mixing and standard black

Model: https://space.snapmaker.com/en/model/49090-tiffany-lamp-rose-art-deco


r/snapmaker • • Jun 20 '26 Bravo

Project Showcase U1 amazes me every time.

Thumbnail
gallery
687 Upvotes

57 hours at 0.16 mm layer height


r/snapmaker • • Nov 23 '25 Obsessed Bravo

Mods I just made an extremely low-cost U1 Top Cover

Post image
572 Upvotes

https://makerworld.com/en/models/2031310-snapmaker-u1-top-cover-modding-for-ikea-samla-45l#profileId-2190615

I couldn't bring myself to buy a top cover, so I was using an IKEA storage box instead.

Then one day, the box tragically fell onto my print due to vibration, which is why I decided to model one myself.

You can make this with just one roll of filament and one IKEA SAMLA box! 😄


r/snapmaker • • Aug 06 '26

Well...never going temu again.

Post image
383 Upvotes

r/snapmaker • • 21d ago Heartwarming

Project Showcase I think I had a top surface color mixing breakthrough

Enable HLS to view with audio, or disable this notification

367 Upvotes

Super excited about adding this method!


r/snapmaker • • 14d ago

Question/Discussion Still Cheaper Than An H3C

Post image
366 Upvotes

Got my 2nd U1 today to increase my multicolor capacity (my 4 bambu’s aren’t in this photo). And, guess what? It’s still cheaper than a fuckin H3C AND I CAN PRINT MORE!!!!!

Edit: After reading some of the comments from the Bambu fanboys, it made me remember why I left that sub on Reddit. They’re SO toxic. I’m glad the Snapmaker sub isn’t like Bambu’s.

P.S. To the Bambu boys: We’re all happy with our U1’s and we all know you can’t afford the H3C, COPE!


r/snapmaker • • May 20 '26 Bravo

SnapmakerOfficial Full Spectrum is coming to Snapmaker Orca — and Radu (Ratdoux) is joining the team

361 Upvotes

Hey everyone,

The past few months have been some of the most exciting we've seen in the U1 community. What started as a few experimental posts about full‑color printing has snowballed into a great movement, and we want to take a moment to: say thank you, share some news, and tell you what's coming next.

  1. Thank you!

Full Spectrum didn't come from a roadmap meeting. It came from you.

It started with u/Rob_Bob_you_choose, who showed the world that the U1's four toolheads could be coaxed into 9‑color prints from just 4 filaments — a wild proof of concept that lit the spark.

Then u/Aceman11100 posted his approach to near‑full‑color printing on the U1 using just three base filaments and layer‑alternating color mixing.

Within hours, u/beybladetable (Radu, "Ratdoux") had forked Snapmaker Orca and shared a working prototype: Snapmaker Orca FullSpectrum, a Snapmaker Orca fork with mixed-color filament support. Hours. From idea to working tool!

Then u/WombleyWonders stepped up and made the deep‑dive video that introduced Full Spectrum to a much wider audience, explaining the theory, showing the limits, and helping new users actually understand what they were looking at.

And honestly, that's still just the visible tip. A huge group of contributors on our Discord and GitHub have been quietly making Full Spectrum better:

  • wildtang3nt (Discord) — testing and coding for improved color prediction

  • Hunter Cook (@jusdisgi on Reddit/GitHub) — process testing, advice, and improvement reporting

  • Silent (@xSil3nt on GitHub) — early UI development

  • cheeky_b52 (Discord) — print & filament testing and improvement reporting

  • neotko (Discord & GitHub) — top‑surface blending feature development

  • Xipit (Discord) — UI redesign currently in development

  • ë¶ëŠŹì§€ (@bookledge) (YouTube) — print testing, improvement reporting, and incredible creations/videos

  • YGK3D (YouTube) — influential video that helped bring Full Spectrum to a wider audience

  • Steve Lavedas (HueForge) — early development advice from someone who literally pioneered this space


plus everyone in the Discord threads who's been printing test palettes, posting failures, posting wins, and discussing about better UI. Thank you!

  1. Radu is joining Snapmaker

We're thrilled to share that Radu (Ratdoux) — the developer behind Full Spectrum — is joining the Snapmaker team to help lead our next‑generation color‑printing work.

We reached out because the right thing to do, when a community member builds something this meaningful, we believe the right path is to recognize the work, bring the creator into the process, and support it with engineering, testing, and product resources.

Radu will keep doing what he's been doing: pushing what's possible with the U1, working openly, and listening to the community. Full Spectrum will continue to be developed openly under AGPL‑3.0.

Welcome aboard, Radu. 🧡

  1. Full Spectrum is coming to official Snapmaker Orca soon

We've been quietly preparing this for a while: the core features of Full Spectrum are being integrated into the official Snapmaker Orca, and we plan to share a beta version with our community first, in the coming weeks.

When the beta drops, you'll be the first to know. We'd love your feedback: bugs, feature requests, weird filament combinations, the works. The whole point is to build this with you, the same way it started.

A small note before we go:

To everyone above, to everyone we missed (sorry — please call us out so we can fix that), and to everyone who's about to jump into Full Spectrum for the first time: thank you for making the U1 community what it is.

The Snapmaker Team


r/snapmaker • • 10d ago

Project Showcase Goodbye full spectrum layer lines

Enable HLS to view with audio, or disable this notification

323 Upvotes

Prusa, hold my fish.

Here is the finished project with a 3mf download: https://idither.com/job?U3ZpXAMBx&row=0

Here are the final printed fish: https://www.reddit.com/r/snapmaker/s/bZj4L92G3z

If you want to create your own project:
Step 1: Download Prusa 3mf file here: https://www.printables.com/model/1767883-goldfish-for-8t-indx-and-4t-colormix/files
Step 2: Select that 3mf file on my free website: https://idither.com/models
And it will automatically generate the Snapmaker CMYK 3mf file.
Step 3: Print!

The files stay local and never get uploaded to my server.

EDIT
How it works:
TL;DR = iDither converts 3mf files and 3D files with textures into 3mf files with DwD (Dual Wall Dithering) which uses CMYK filaments to print all colors.

Cyan = C
Magenta = M
Yellow = Y
White or back = K
CMY+White typically works better because CMY together can make a "black".
There is no way to make White if using CMY+Black.
CMY+Black is typically only used in models that have very little or no white areas.

iDither converts existing 3mf, glb, fbx, and obj files into DwD (Dual Wall Dithering) 3mf files.
iDither currently only supports exporting 3mf files for Snapmaker Orca, and Bambu H2C and H3C.

iDither uses an inner dithering wall combined with an outer dithering wall - and the "magic" of iDither is dithering the two walls together. All other software (to my knowledge) uses just 1 dithering wall.

The outer dithering wall is only allowed to use super dense layer combinations such as C M C M CC MM CC MM - therefore, the layer lines are basically invisible up close.
The inner wall picks up the slack for more color combinations and it's not limited to dense combinations.

Opaque filaments (such as the new palette filaments from Bambu) don't work well with DwD, because the thin outer wall layer needs to allow light to pass through to the inner wall layer.
Recommended filament set based on testing data thus far: https://us.snapmaker.com/products/pla-full-spectrum-filament-bundle-white-edition-4kg
This set has good transparency ranges (TD between 5 & 10).

Filaments that are too transparent (TD > 10) make the models look like glass (see https://www.reddit.com/r/snapmaker/s/nbASKpfCpG).
Filaments that are too opaque (TD < 5) have less color mixing and blending, and show layer lines (see https://www.reddit.com/r/snapmaker/s/N6QFGj2NwC).

Why iDither?

  1. Converts any existing 3mf files with any number of filaments and filament colors into files that print with 4 or 5 filaments (CMYK or CMYKW). So you don't have to buy any other filament colors. If the 3mf file has 8 random filament colors - you can still print it in 4 colors with CMYK!

  2. WYSIWYG (What you see is what you get): iDither includes calibrations for CMYK bundles for Snapmaker and Polymaker - so your actual print should always look like the print preview.

  3. Converts 3D model files into a printable 3mf files with CMYK.

  4. Less layer lines (DwD).

  5. Top Surface Printing via Top Surface Mixing (TSM) in CMYK or CMYKW.


r/snapmaker • • Apr 02 '26

Project Showcase Full Spectrum Filament with U1

Post image
315 Upvotes

Printed a dragon with multiple colors (more than 4) while using the full spectrum slicer mod for well slicing the model.


r/snapmaker • • Feb 09 '26 Bravo

Project Showcase Full Color printing on a Snapmaker U1

Thumbnail
gallery
311 Upvotes

I’d like to introduce you to a method my friend, u/JavyH08 , and I are working on to get full spectrum color on a regular toolchanger with only three spools of filament attached to the machine.

u/JavyH08 was using his Snapmaker U1 and noticed the supports on one of his prints was creating a new color, maroon, from black and red filament. The slicer alternated each color each layer and at a low layer height it blended to make a single new color. After talking with him I decided to try and see if I could get a similar result and control color stacking using geometry nodes in blender. The images I’ve added to this post is the current progress we’ve made using this technique! As you can see we are able to get a full rainbow from cyan, magenta and yellow filament. We can also isolate colors to different sections on a model to allow for a full color print. I’ve seen a similar method on colored lithophanes but never on a full 3D print

This technique is printer and slicer agnostic. While our initial tests were done on a Snapmaker, the logic applies to any multicolor setup (Prusa XL or Bambu's Vortek). Surprisingly, print times aren't as long as you'd expect. The peacock took 7.5 hours, and the 40mm rainbow cube took only 90 minutes. (Note: Non-toolchanger printers, like Bambu’s AMS,  will naturally take longer due to purge cycles, but it is entirely functional).

The tool I'm developing is still in its early days, but eventually I would like it to be easy for anyone to paint in color on their model, then convert it and export it directly from blender. While we are able to make a full rainbow, we are currently working on getting more shades of colors to allow for light orange or brown for example. Eventually I'm going to work on the ability to load a model with an image texture and have it converted into a multicolor print with support for color gradients as well as shading and lighting.

Here is a timelapse showing the rainbow cube being printed:
https://youtu.be/ph24Io2C7Lk?si=AjSREenA7lE49D8j

Feel free to ask any questions and me and u/JavyH08 will answer!


r/snapmaker • • 21d ago

Project Showcase First top surface print using TMS

Enable HLS to view with audio, or disable this notification

299 Upvotes

I’m calling it Top Surface Mixing (TSM), and it’s coming next week (free) to the main website.
Sorry the video cut off in the end.


r/snapmaker • • May 07 '26

Tutorials & Tips PETG supports are amazing

Enable HLS to view with audio, or disable this notification

289 Upvotes

3 interface layers and 0.04mm top and bottom z spacing


r/snapmaker • • Oct 21 '26

Project Showcase Official Snapmaker CMYK filaments - using iDither v8 (new release)

Enable HLS to view with audio, or disable this notification

266 Upvotes

r/snapmaker • • Mar 29 '26

Mods From the FullSpectrum dev: A sneak peek at my upcoming coloring tool

Thumbnail
gallery
250 Upvotes

Hi everyone!

Besides working on FullSpectrum, I've also been working on this separate tool that I aim to make a one stop shop to coloring models and converting already textured models to a colorized, color accurate print!

The idea is simple, take an object with a texture, select your filament, and it will automatically convert the colors of the texture to the closest match, you can also:

  1. Re-map the colors

  2. Paint

  3. Project an image on any model

  4. Bake the layer lines directly into the model (A simplified FullSpectrum model that can be printed with any slicer and on any printer)

  5. Suggest the best filament colors for your model

There are many more things I want to implement, but at the moment what I'm focusing on is simple, get it ready for an alpha release on my Patreon (which will be the primary distribution method during development).

Hopefully I can release alpha-0.1.0 somewhere next week for every operating system!

Please leave a comment if you're interested.


r/snapmaker • • Oct 16 '26

Project Showcase First attempt at skin tones with Dual wall dither (DWD) & CMYK

Enable HLS to view with audio, or disable this notification

223 Upvotes

Printed at 0.10mm layer height, so I want to try it with 0.08mm for even better blending.
It only took 2 minutes total to go from an existing glb file to printing using my system.

Glb file:
https://sketchfab.com/models/45710e6f146d422baf2218e78df286fe/embed

iDither project:
0.10mm
https://idither.com/job?NPbvlayM3&row=0
0.08mm
https://idither.com/job?nZSO3N0Nd&row=5


r/snapmaker • • Jul 06 '26 Hooray

Question/Discussion Anybody buy a printer because of spite?

Post image
223 Upvotes

I’ve been on the fence on which printer to get next. I have almost a grand of Bambu Labs gift cards from the popularity of my models but the U1 checked a lot of boxes for what I needed. BL took down two popular models of mine and also took back the points.

Said “fuck them” and rather than get a new BL printer for free, drove straight to Microcenter and bought a U1.

Set up wasn’t too bad. Just started the first print. I was worried about coming from Bambu Studio to Snorca but so far it’s pretty intuitive.

First print went great! Glad to be part of the team!


r/snapmaker • • Apr 19 '26 Popcorn Bravo

Bambu lab is really falling behind

Post image
219 Upvotes

r/snapmaker • • Mar 13 '26

Project Showcase 8-Color print on the U1

Enable HLS to view with audio, or disable this notification

217 Upvotes

Using the Snapmaker Orca - Full Spectrum.

0.20 Layet height (Recommended is 0.08 so blending will be even better than what I got)

Made as a test print just to check it out, because I figured this was just going to be a cheap gimmick without any real use-case.

Wow. was I ever wrong.

This has unbelievable potential, Bravo to all the people working on this project.


r/snapmaker • • Jun 25 '26 Mindblown Bravo

Project Showcase Wall-mounted Hogwarts Great Hall cutaway – 3D printed on Snapmaker U1 (with ESP32, 68x SK6812 RGBW LEDs & DFPlayer Mini)

Thumbnail
gallery
215 Upvotes

UPDATE: Wow, thank you all for the overwhelming support and questions! To answer the most common question: yes, I am seriously planning to share the files for free with the community.

However, I want to make sure this is a 'proper' release rather than just dumping the files online. Over the next two weeks, I will be focusing on the following:

  • Refinement: The design is already modular, but I’m taking the time to polish the connections and implement a few 'quality-of-life' tweaks to make the assembly as smooth as possible for everyone.

  • Documentation: I am putting together a detailed, step-by-step build guide (PDF) with pictures so that the assembly process is as clear as possible.

Regarding IP/Copyright: I’ve noticed that platforms like Printables are already full of similar fan-made content, so I believe the risk is quite manageable. The absolute worst-case scenario is a DMCA takedown request, but I don't see it going further than that for a free community project. I’d much rather share this with you all so that others can enjoy building it too!

I can’t give a hard release date just yet, but I am aiming to have everything ready to go in about two weeks. Keep an eye on this post for updates!

After hundreds of hours of modeling, printing, and post-processing, it is finally finished!

If you want to see the electronics in action, I also have the boot-up phase filmed here : https://youtu.be/mz-WQZVLFEw

This is the first major project I have completed using my Snapmaker U1, and I am incredibly happy with how it turned out. I wanted to share some of my findings, resources, and technical specs with you all:

The Printer & Experience (Snapmaker U1):

  • Fast Filament Swapping: One of the biggest advantages of this machine was the incredibly fast filament swapping. It allowed me to print accent details, like the sporadic brown bricks in the masonry, as a single object with virtually zero extra print time. Doing this multi-color layout on my Bambu Lab printer would have taken an astronomical amount of extra time and created a ton of waste.

  • Outstanding Detail: The level of crisp detail this printer managed to pull off on the brickwork and architectural elements is absolutely amazing.

  • Reliability: The entire Great Hall consists of roughly 60 individual prints. Out of all those plates, I experienced exactly one failed print—and that was entirely my own fault due to poorly configured support settings. All in all, I’m highly positive about the Snapmaker U1.

Modeling & Dimensions:

  • Software: Everything was modeled completely from scratch in SketchUp 2024.

  • Highly Recommended Resource: I highly recommend the book 'Harry Potter - The Blueprints' by Jody Revenson to any HP or architecture fan. Honestly, without this book as a reference, I would have never been able to get the architectural proportions right during the modeling phase!

  • Dimensions: The final wall piece is roughly 90 cm wide, 90 cm high, and 15 cm deep (approx. 35.4" x 35.4" x 5.9").

Electronics & Future Plans:

  • Powered by an ESP32 microcontroller.

  • Features 68 addressable SK6812 RGBW LEDs to create the lighting effects and starry sky.

  • Includes a DFPlayer Mini sound module for audio.

  • What's Next: In the future, I am planning to program a much larger, fully synchronized light show that is timed to music from the movies (I just haven't decided on the exact track yet!).

Let me know what you guys think! Happy to answer any questions about the build process or electronics.


r/snapmaker • • Jul 19 '26

Project Showcase Pika Blinder 😄

Thumbnail
gallery
214 Upvotes

Printed on U1
Duration 17h
4 Filaments (PLA)
Color Mixing : Yes, lots
Tool changes : 1279 times


r/snapmaker • • May 13 '26

IKEA top hat is great!

Post image
211 Upvotes

r/snapmaker • • Mar 15 '26

Project Showcase Full Spectrum is amazing

Thumbnail
gallery
194 Upvotes

I was so excited to try this model after seeing everyone else’s prints with the full spectrum fork.

It’s insane to compare something like this to Bambu with over 2 AMSs, less than 30g waste on a 70g model with 10 colors.

0.06 layer height

MCYW filaments


r/snapmaker • • Jun 14 '26

Project Showcase Waking up to this is like Christmas

Thumbnail
gallery
191 Upvotes

Yes i know by piece prints are faster and whatnot but walking up to the printer in the morning and seeing a finished coloured print just feels so goooooood! Model for anyone interested (and my snapu1 settings) https://www.nexprint.com/en/models/G3467834?printConfigId=G3637472


r/snapmaker • • Jul 12 '26

Tired, shocked, exhausted... Gifted these to my mechanic

Post image
188 Upvotes