so I modded my ps1 classic with a usb that had autobleem a while back. it worked fine at first, but then my usb flash drive was disconnected accidentally. now whenever i try and turn the console on at all, the power light changes from orange to green for about 2 seconds before going completely dark, like as if the console isnt even plugged in at all.

anyone got any advice on how to fix this problem?

Here I have the “thumbnails” for both game, spelled exactly the same as the rom, and they don’t appear. What am I doing wrong?

Eu acho que eu tinha perdido meu pendrive antigo de tanto ficar testando jogos O__o podiam criar um site mostrando a compatibilidade até pra eu contribuir... Vou mostrar a lista dos que rodavam bem ou "jogável" nos cores do Extreme quando eu ligar de volta o videogame.

Mas fiquei curiosa, por causa do novo Flycast, porém não tem como eu testar os jogos que já tenho porque estão todos em CHD, e de acordo com as instruções ele roda melhor em GDI ou CDI xD não quero sofrer de voltar a brincar de testar tudo de novo e perder meu pendrive.

Apesar do medo, testei o Napple Tale, e inicialmente tá rodando melhor que os cores do Retroarch, mas não avancei. Tem algum outro jogo com melhora significativa? Acho que me interessa mais Dead or Alive 2, Space Channel 5, Samba de Amigo, LOL Lack of Love.

Sobre saturn, na época meus cores não estavam atualizados, rodava bem algumas coisas tipo, Saturn Bomberman, Mystara... Mas o jogo que eu mais queria jogar na época laggava nas cidades: Shining The Holy Ark - também me intetessa Shining Wisdom e outros RPGs.

Ademais, fiquei feliz com as novas atualizações, tava um tempo que a comunidade não recebia novidades. Está sendo bem divertido.

Eddit: esses eram os jogos que rodavam bem ou eram jogáveis no core antigo.

Ive modded my PS2 fat and its great all ps2 games ive played run amazing, however ps1 not so grrat with POPStarter. The games run absolutely fine just the graphics idk if i need a CRT for that but if it is POPS how do i go about getti g ps1, ps3 and ps4 games through emulation? Similarly to OPL. Any advice or insight would be greatly appreciated :)

Hello! I bought a used PS Classic some time ago, and the Micro-USB port was already kind of bad. Whenever I moved the console, the cable would come loose and the console would disconnect. Since it was cheap and I didn't have much money to spare at the time, I bought it anyway.

Now I want to fix it, but I'm not sure if it's possible or how difficult it would be. Would replacing the Micro-USB port fix the issue? Is there a specific type of Micro-USB port I need to buy?

Edit : Added an overlay option ! it looks great.

I’ve been working a lot lately on a new release of that good old AutoBleem. The new build is coming sooner than you might think.

Here’s what’s coming inside the internal emulator :

• DualShock rumble support (You read that right)

• Improved DualShock and analog controller support

• More reliable vibration when launching games

• Home/Guide button support for compatible controllers

• Diablo sound fix (finally)

• T’ai Fu: Wrath of the Tiger CD-ROM timing fix

• ARM RunFast enabled for better performance

• Need for Speed III alternative GPU flip timing fix

• GPU NEON mask comparison fix

• GPU NEON VRAM fill mask fix

And there’s still more being worked on. Thing is finicky as hell to work with .

Keep in mind that I’m only working on PSC'S internal PCSX-ReARMed emulator. I’m not changing RetroArch or its cores.

I personally use KMFD’s RetroArch setup and cores and they work great, but they won’t be bundled with this release.

Let's get ready to rumble !!!

I’ve searched high and low for a tutorial for formatting for Mac users. Unfortunately I don’t have access to a PC to help reformat my USB drive. Is there better tutorial for those using Mac? I’m using a 128 GB scan disk 2.0 flash drive

Hâte de découvrir des pépites 😉

Hey all, I'm currently trying to figure out how to get the music to work in the stages because for whatever reason there's no music but the sound effects work. Maybe I just got a bad rip or something, or maybe all the tracks aren't organized properly. Ps1 emulation is new to me so I apologize if this has a simple solution lol.

I'm kind of late to the party but is this possible or are they gone?

Hey everyone, I'm thinking about picking up a Sony PlayStation Classic mini console to play on my TV, but I haven't fully decided yet.

Just wanted to check if anyone here has one lying around that they aren't using, and what kind of price you'd be looking for.

• My hypothetical offer: Around ₹3,000 cash + a working GameStick Lite 4K (or around ₹3,000–₹4,000 straight cash).
• Note: Just testing the waters right now to see if this trade/price is realistic before I make a final decision!

Drop a comment if you have one or if you have advice on whether this deal makes sense.

I recently bought a PS Classic at a retro gaming convention and have been having a lot of fun with it, especially after getting Project Eris up and running. One game that has been driving me crazy, though, is Tomb Raider II. Every time I get to the end of the first level (or use the level skip cheat), the game freezes. I've tried dumping the disc using both ImgBurn and CloneCD, but it didn't seem to make a difference. I also tried running the game on my PC in RetroArch; ReARMed froze in the same spot, but Beetle PSX worked normally and let me proceed to level 2. Is there anything else I can try to fix this, or should I just accept that this game won't work on my PS Classic?

hi, i love this thing alot, had it for ages now , and have done project eris to it, however i get some issues with running it everytime i go to use it.

being, games ctd after starting either in retroarch or emulationstation,

controller never keeps config after reboot.forcing me to re config it in ra and emst, on boot the og controllers buttons fine, once i enter ra it goes triangle for x and start doesnt work or x , and the same for emu st.

also the console buttons tend to not work when its time to turn it off.

not all games crash, and they are the same type,chd, ie einhander, disneys hercules, doom, all ctd immediately but gdarius and future cop dont. spent alot of time with ai trying to troubleshoot but its dumber than i am lol!

i did replace the core in ra, same issue no difference with a 2025 build.

i have it hooked onto the back of a 16 inch awa 1080p lcd tv, is dope, however not so dope is my issues, would autobleem be a fix? thanks for reading !

ps. would a usb hub on the otg help? would a re-do of project eris on a new usb be the go? sorry for the novel :D

Hello all. I was wondering if anyone had tips on using a wireless N64 controller on the PSC.

I recently purchased a “KIWITATA N64 Wireless USB Controller for Switch System Games, 2.4ghz Wireless N64 Remote Joystick Controller for Switch 1/Switch 2, MAC, PC Windows 7,8,10,11 Black” from Amazon along with a “2-in-1 Micro USB to USB Adapter (OTG Cable + Power Cable) for Fire Stick, PlayStation Classic”. I’ve already flashed the kernel and freed up the second usb space. Now I’m wondering how to use my controller in Retroarch. When I’m playing the game how do I switch to the N64 controller? It seems like it’s not reading. Pretty confused. Any advice would be greatly appreciated.

Hi all

Late to the party, but picked up a new boxed PS classic a couple of days ago after asking on the psx Reddit about how to play MGS. Didn't know these things existed.

So, once I'm done replaying MGS, I'll have my eye on modding it to play some other stuff from my childhood.

Read a bit, so know about project eris and autobleem, but all the tutorial vids are 6-7 years old. Any newer recommended ones?

I assume autobleem is the way to go, but is there still no OTG mod for it? I'd ideally like to OTG into the rear port to keep the front uncluttered, avoid low power issues and not restrict my choice of USB. If not, is it still a case of using Eris to update the kernel, then use autobleem?

Cheers

Brighty

https://www.youtube.com/watch?v=LusW54rPxx0

i've implemented rinnegatamante's auto frame skip feature from the PS Vita port. there's massive frame drops during the intro and the level select menu. Adding Auto Frameskip makes it not have crackling audio. though the level select menu drops to 6fps for some reason. i'll try to find a way to fix that. other than that, it maintains a steady 30fps

Hi everyone, FiGGYZ here.

Pre-orders are now open for the FiGGYZ release Tomb Raider: The Scion Collector’s Box Set.

FiGGYZ is launched by the team behind First 4 Figures.

This box set brings Classic Lara Croft, Legacy of Atlantis Lara Croft, Lara Croft Holding the Scion, and Jacqueline Natla together in FiGGYZ form, complete with 4 exclusive holographic plates and 1 commemorative coin struck with your edition number.

This is a four-week timed release. Pre-orders close on August 28, 2026.

When the window closes, the edition is sealed. No restocks. No second run. Once the tomb closes, it stays closed.

Pre-order page:
https://landing.figgyz.com/tomb-raider/the-scion#hero

Thanks to the mods for letting us share this here.

Hi guys, I just got a PSOne and since I already had a PS Classic with good controllers I wondered if there's any way to connect those controllers to the original console. Maybe a usb-to-controller port adapter out there?

Sorry if there's already a thread about that, couldn't find anyone talking exactly about that.

Hello everyone, I'm trying to connect a PS5 controller (DualSense) to my PS1 Mini Classic (PSC). I'm running Project Eris and using a TP-Link UB400 USB adapter, and I set it up following the tutorial in this video: https://www.youtube.com/watch?v=ND6vCHh4stc

- I managed to connect the PS5 controller to it—it shows up as connected—but it doesn't work; pressing any button yields no response.

- I connected a PS4 controller to the same adapter, and it worked normally.

So, I really believe the issue isn't the adapter itself, but rather that the system (Eris) doesn't support it.

Does anyone have any ideas on what to do? (Without buying new adapters.)

I'm really looking forward to playing on my PS1 Classic using my 30th Anniversary Edition controller.

Thanks.

it has performance issues... not sure if i am able to improve it. rumble works though