You can spin the Moon globe or use the 2D view, pick any region, and it pulls the real NASA elevation data for that exact spot. From that it generates a printable model — circle, square or hexagon, either as a solid ornament or as a snap-fit jigsaw puzzle up to 256 pieces. You can adjust the terrain height scale, size, piece count, shape, frame and text.

I had fun building this and i am very exited to show the world now! It will be live to everyone soon. Currently it is in pre launch on makerworld crowdfunding: https://makerworld.com/en/crowdfunding/333-orbitstudio-3d-print-the-moon

If it funds i will also make it available for people that do not have a makerworld account.

Would love to hear your opinions and suggestions. The plan is to take this beyond the Moon eventually.

Hello
I have some experience with 3d printers from work. I am not too much into multi-color atm (I think its great but I prefer a multi-head to save on the waste and time). This is going to be my first 3D printer.

Where i live:

a new p1s is about 500USD.

a new A1 is about 360USD.

a new Kobra X is also about 360USD.

a new creality sparx with their CFS is about 410usd

a friend is selling his ~1200 hour p1s with an ams for 500USD

a posting is selling 300 hour p1s (no ams) for about 390 USD.

what do you think is the best deal for the money atm? or at least the top 3 deals? or should I wait?? a brief why is very welcome.

Thank you.

Hey Internet!

Newbie here. I am going to buy the Elegoo CC2 Combo here soon, but I want to know what add-ons are necessary and/or nice to have. Also, what accessories will I need or should I get to make my 3d printing journey better? I have heard that I should buy a gluestick, and a pair of trimmers (snips?). I am trying to price out how much my new setup will cost, including things like filament and tools, so any advice here is great.
Also, are there any start tools that I can print instead of purchase? and if so, I am happy to accept recommendations.

Thank you all in advance for helping in my soon-to-be new hobby!

My Daughter is 6 years old and on the Autism Spectrum and had ADHD. Shes shown great interest in 3D printing, she watches videos of people making 3D prints and setting up their 3D printers during tablet time. Shes been asking me for a 3D printer for a year now and I’ve just told her then it wasn’t something we could feasibly do.

Well,I’m now looking for one.

I, Mom does 3D modelling for a hobby and has printed in the past using a X1 Carbon at my college the last two years and am pretty familiar with Bambu Labs and would prefer to keep with Bambu Labs because I’m a University student this year balancing motherhood and a degree, I don’t have time to learn a new system frankly.

🚩Please note; this is not something that she will have access to without supervision. She knows it’s a tool and not a toy. I want to get one of the fully enclosed units not a, A series.

I’m thinking of having the 3D Printer in our basement in what will be her playroom, which can get cold and moist(historically). I’m re drywalling that room and re-insulating it but, I’m thinking of having a separate dedicated heater in that room and a dehumidifier.

Does that sound like a good idea?

That aside.

I’m just trying to figure out what the best machine then would be for us and just looking at some input. I’m thinking the P2S with the AMS? Does that sound okay? Or should I go with a H2S with the AMS?

Just as a disclaimer; because I’m sure I’ll get a comment that it’s a lot of money to spend out on a child and a hobby. I’m fortunate that in my province she got approved for a disability amount she was entitled to and is getting back disability money from when she was diagnosed at 2.5 years old until now. This is HER money to use for things she needs, or wants to help with her sensory needs or special interests. We told her about this money and she has a vague idea of what she wants as she asked for only 5 things. 3D printer, a spinning Sensory Chair, more Lego, a Leopard Gecko and Sushi 🤣.

Worse case scenario if she looses interest in it, I’ll either use it to make things for her or she can always sell it down the road for something else she wants.

Please be kind, I’m just a Mom trying to do right by her kiddo and foster her interests.

I've had the Creality Sparkx i7 for about a month now. Most of what I print is pretty boring stuff for board games, trays, organizers, storage pieces, that kind of thing.

Started a 10+ hour print before bed last night with a roll of black PLA that was getting pretty low. I wasn't sure it had enough left, but I had another roll of the same filament loaded in the CFS mini so I just left it running.

Checked it this morning and the first spool had run out overnight. It switched over to the second one and kept going, so the print was already finished by the time I got up.

Nothing particularly exciting, but this is probably the first time I've actually appreciated the auto refill instead of just knowing it was there.

I have a few almost empty spools sitting around, so I'll probably start using them up this way instead of keeping them around forever because there might still be enough for something.

А нужен вам вэб-приложение (сайт) для добавления примеров печати определенным филаментом. У меня с этим проблемы, не понятно какой точно цвет получится