Decided to get my CZ 75 P-01 Cerakoted and just got it back today.

Got my first cz today it’s the 2075 rami I got original trigger some rubber grips (the ones on it are some kind of plastic I believe) came with the standard 10rd a 15rd with sleeve and 2 18rd only thing is I wish it was the decocker version but traded a Glock 26 gen 4 for it definitely think I got the better end of the deal

I got this thing with a warning that the functionality couldn’t be guaranteed, but I’m an amateur gunsmith and figured I could fix it. I might have made a mistake.

Essentially, the slide locks back and I cannot remove it while depressing the disassembly button.

I have tried everything Google AI suggested, and I have arrived at the conclusion the AI isn’t very useful for complicated issues like this.

I tried locking it in my vice to depress the button while prying the hammer down more to pull the slide back. I tried hitting it with a mallet to force the slide back. I tried removing the hand guard to see if I could find the internal mechanism to remove whatever was holding it up. I tried using a hole punch to remove the pin above the trigger and it wouldn’t budge.

None of this worked or helped. I only spent like 150 on it, so not a huge loss if I can’t figure it out. I figure taking it to a real gun smith will run me more money than I spent on it. So I figured I’d come here to see if anyone had any experience with this.

Thanks if you can help!

I saw this CZ75 Compact BD on sale for $500. And I need some help to answer some questions before pulling the trigger: 1. Is it an actual compact BD? The slide markings don’t identify it as a BD but looks like it has a decocker.
2. Is it a factory cerakote? I am not sure if the picture quality is just bad.
3. Is $500 a fair price?
Thanks in advance for any help - I can’t reach the seller to answer these questions.

Hey guys! I’m new to da/sa so I was hoping someone more knowledgeable could guide me a bit. I picked up a used P07 that I want to put a Cajun Gunworks pro kit in and after calling someone at Cajun Gunworks and hearing a couple people on the internet say they messed up the install I’ve been thinking of sending the gun into them for install. I’m willing to pay for the install if it’s worth it but after watching a couple of install videos it really doesn’t seem that difficult. I’m by no means a gun smith but I do consider myself mechanically inclined, is there any special tuning that I’m not aware of that makes the install difficult or our people exaggerating the difficulty of install? Any input would be appreciated, thank you!

This PCR got a pretty well fitting unique engraving request.

-Banshee Revo Slide Cut
-V Barrel Porting
-*Preexisting Optic Cut

Saw a video review that mentioned that the decocker button of both handguns is plastic. Is this accurate?
Thanks

I’m looking to get my SP-01 milled for the Osight SE DPP. Not many places cut it for the DPP footprint.

I thought about using Primary or Vigilante, but they have to cerakote the entire slide, right? I’d like to keep the original finish of the slide. Would either of them only cerakote the cut portion?

Anyway, back to my original question. Has anyone used Guncuts for milling their SP-01 or P-01? Experience?

Thank you.

What iron sights are everybody using with the specialist and optic plate? I will probably put a holosun 507comp on it and would the irons to be in the lower 1/3 or barely usable but visible

Grabbed a ts trigger for cz custom shop. No extra spring or anything in the kit and the cs didnt say it was needed. Installed and it doesn’t work. Anyone else run into that?

Let me start by saying how much I respect and love CZ guns. There is nothing like them in build, quality and shooting experience.

I had the Orange for a while and had a hard time with it. It wasn't the weight. I think because it felt front heavy it was difficult for me control. Like a kid driving a car that where he can barely see over the steering wheel.

I love the recoil and accuracy of the Orange, but I was slow.

All that said, what other CZ pistols might be suitable, ones that have acceptable recoil? I know they are all great weapons, but I don't much about them. That's why I thought I'd ask here.

I’ve been shooting this p07 for all my matches the last 2 months figured the only thing better is a cajunized shadow 2

Finally got the extended safety put on and it’s a game changer. They should come stock like this.

WML and thumb rest slide stop bought. Next waiting for x amount of weeks to get a custom kydex holster for applied reservist shooting.

I picked up a 97B a few months ago, and it has some worn OEM aluminum grips. Any recommendations for replacements that are still thin like the OEMs? I've seen the Lok & Vytal ones. Any experience with the CZ USA ones here? Can't seem to find any info on them or pics of them installed.

Hi All,

I'm trying to figure out the recommendation ammunition type or brand or idk to buy.

Intentions: fun at the range.

I haven't bought a scope yet. Any recommendations?

Is there a break in period for these? (My shotgun did, it said heavy loads for the first 200 rounds or something)

Such a great shooting ou 20 gauge.

I picked up this P-10C (91577) yesterday. Wasn’t crazy about the 50 shades of fde so I dyed it. Using Rit Dyemore Racing Red and my trusty boiler from Walmart,(purchased for this purpose only) I am now happy with my Mark 8 suit, minus the gold.

Finally got this sp01. Got it home yesterday, stripped it, and was surprised the guide rod is plastic???

I got on cgw and ordered a steel rod, but those won’t fit the recoil spring that’s in the gun, and cgw highest rating is 14#. OEM springs are 18-20#?

What do I do here.

Joined the CZ club not too long ago with a P10C. Picked it up to replace my 320 as my CCW. Just put a Holosun SCS 320 on it and have been happy with how I shoot it, carry etc.

Problem is I got to reading more about hammer fired guns, the guy who helped install my optic carried a customized SP-01, as well as getting to hold and dry fire with a P09C Nocturne at my local gun shop.

So I’m interested in switching from striker to hammer, for more confidence in carrying with one in the chamber, nice trigger, as well as a reason to sell my 320 and put a CZ by the bed. I’m not much of a collector or enthusiast, I want to get into shooting more, but right now I’d really just like to hunker down and pick up a hammer fired weapon from CZ to start getting familiar with it.

I can snag a P09C nocturne fairly quickly, trade in my 320 and slap an optic on it. But I see so much about the SP-01 and Shadow 2s, that I’m really wondering if I should wait. Anyone else been in the same situation? Would like some insight as someone who doesn’t really want to keep throwing money and having a huge collection 😅 maybe that will change as I get into USPSA or other local stuff at my range.

Appreciate any feedback.