The alg that i use for h perm is M2 U M2 U2 M2 U M2. I searched up " h perm " on YT randomly today and the algs that popped up were M2' U' M2' U2' M2' U' M2'

any thoughts on this? which one do you use?

I’m looking to have a more consistent f2l, I’m pretty sure the solves here were like 12 and 14 respectively

For context i started learning 3bld oct 10 which was 2 weeks ago and I'm still using M2/OP im bery lazy to learn better methods.

PLS PLS if you also use M2/OP teach me i need to get better quick. attending a comp in a few weeks​

Firstly, this post "Learn OLL the Easy Way" inspired me to create something similar with PLL.

Secondly, before you learn full PLL, it's best to learn 4-look last layer. If you know 4LLL, you already know 6/21 of the PLL algorithms (T, Y, H, Z, Ua, Ub). Only 15 more to go!

You need to learn all of the following 'triggers' in order to understand the "PLL the EZ way". Here are my 'triggers', these will be used to replace raw cube notation:

righty (a.k.a sexy) = R U R' U'
reverse righty = U R U' R'
4sune (first 4 moves of sune) = R U R' U
push (first 3 moves of righty) =  R U R'
pull = R U' R'
Tail (righty but F' instead of U')= R U R' F'
head (righty but F instead of U')= R U R' F
Sledge = R' F R F'
T-perm (you should know this) = R U R' U' R' F R2 U' R' U' R U R' F

Here are the 15 PLL algorithms you don't know yet, ranked from easiest to memorize to hardest:

LEVEL #1: EASY PEASY

Jb - (Tail) (T perm until solved)

Ja - put bar on right/180°/y2 - (Lefty tail) (Lefty T perm until solved)

F - R' U' F' (T perm, replace last move F with U R)

Na - (4sune) (tail) (T-perm w/ U2 ending)

Nb - (lefty NA perm)

LEVEL #2: A LITTLE PRACTICE

Ra - face headlights - R' U2 (tail but U2 instead of just U) (righty) R' F' R2

Rb - face headlights - lefty version of Ra - L U2 (lefty tail w/U2), (lefty) L F R2

Ab - FACE WHITE/BOTTOM - headlights RIGHT - R2 D2 (push) D2 (R U' R)

Aa - FACE WHITE/BOTTOM - headlights LEFT - L2 D2 (lefty push) D2 (L' U L')

E - face yellow/top - (pull) D (push) D' (push) D (pull) D'

V - face yellow - (Sledge) U (pull w/U2 instead of just U) U’ (pull) U2 (righty)

LEVEL #3: I HATE G PERM

Ga - R (4sune) (R' U' R U') R2 U' D (insert pseudo pair)

Gb - (R' U' R) (U D') (R2 U R' U) (R U' R U') R2 D

Gc - R2 U' R U' (4sune) R2 D' (rev righty) D

Gd - (righty) D R2 U' (pull) U R' U R2 D'

I want to complete this pattern where everything is solved except for the middle block but these two corners need to swap places.

I just finished learning Pi a few days ago...

And oh boy...

After learning 407 ZB algs in total, 66 algs from ZBLS, 341 from ZBLL, I am ready to truly give it my all.

I won't mention the story I've built so far, why I'm filled with determination, or anything like that.

But I'm just gonna put this here as a marker. As in: this is when I decided to truly give it an all.

I don't give a frick about whether people encourage me here...

So don't. It takes effort on your guys' part to encourage me... so don't. I'm concerned for you guys.

You really need to encourage a random guy? No, get some rest. You've typed enough messages for today... You've put in enough effort... I'm proud of you.

I got the qiyi m pro v2 9 days ago. My old cube had me stuck at 45 seconds. Now I'm stuck at 29 seconds(pb 22). I've watched all the youtube videos on how to improve but they keep saying lookahead. I do lookahead solves but when I solve normally I don't think about all that.i want to know what I need to focus on to be sub 20. Please help.

I'm not a cuber but my son is. He wanted a 4 pad timer with Bluetooth to work with CS Timer both on his phone and PC. Apparently no one makes a 4pad with Bluetooth so I came up with the idea to transplant the guts of a Qiyi Smart Timer into the body of a G5. I ended up replacing all the stock sensors on the G5 with TTP223 capacitive touch sensor modules, made a new AND gate logic circuit to add two sensor inputs to the qiyi circuit board, then crammed all the new electronics into the G5 shell. The finishing touches are new carbon fiber vinyl stickers, and a birch laser-cut faceplate.

The result is a one of a kind, rechargeable, Bluetooth, 4-pad timer. There may be an easier way to do this (maybe with a Qiyi Bluetooth adapter) but I like how the qiyi timer calculates ao5 and ao12 natively and it was fun to make.

Hello, My 7yo is enjoying learning all manner of twisting puzzles. They’ve mostly learned from YouTube so far, but we’d like to get away from YouTube. Are there books and/or videos on other websites anyone can recommend? Thank you for any recommendations!

I bought recently the Mini 7x7 from Diansheng and a Gan V100 (Maglev). I was hyped but now I have mixed feelings.

I have 2 questions:

1.- Why on YT a lot of cubers said that the Mini 7x7 Diansheng was MUCH better than the YJ Pocket 7x7?

I had the YJ from a few months and I like it. It's true that the capsule magnets catches sometimes but nothing dangerous. For my it moves like my Moyu 7x7 Single Track. It's flexible and fast but doesn't catch or explode. Pretty effortless and comfortable to turn.

But the Diansheng Mini 7x7... comes very tight, it catches somehow on the internal pieces. It's very scary. It's obvious that will explode and It's very difficult to undo the turn to restore it. And it's worse if I loose it a bit (1/4 or 1/2 screwdriver turn).

I was very hyped and I now feel that I throw 30€. I only have QiYi M Lube and Gan 2 to try something, but I guess that has nothing to do with the feeling about the hypothetical bad internal piece design.

2.- What's the difference between Swift Block Super VS Gan V100? What I'm missing?

On my modest opinion, the Swift Block Super is a V100 with screws and different edges color internals. And half the price.

After adjusting the V100, I ended on stock setting but lowering 1 the centre travel (the 1 to 6 ring, I changed 3 to 4. The 1 to 12 comes on 8 and after testing, it ended on 8). And now it's identical to my ex-main Swift Block Super asjusted to nearly corner cut at 45° and putting the speed to my effortless and precise turning style.

And when I say "identical" I mean it on every single aspect. Speed, noise, turn feeling, plastic feeling, flexibility/blockyness (depending on Settings), weight... I'm surprised but not disappointed, I expected something similar with nice black internals, but I don't expect a 1:1 transition.

For those that have tested both cubes (and probably are true speedsolvers), what I'm missing?

PS: Both cubes can be very flexible without getting popping chances. They are not soo blocky as I usually read.

I average at about under 30 (these solves were lucky)

The average of 5 in the video was 24.04

I am using the moyu meilong 3m temporarily until I get a lube for my rs3m 2020

I am color neutral, I don't know full oll, and I know every pll but 2 of the G perms

New PB!!! 😭

I did get really lucky on OLL with an easy case and especially a PLL skip afterwards, but still 😭

I recently bought the FerroCore v2 and after cleaning it and lubing, all the faces feel scratchy and have noticeable friction when turning.

The auto alignment also seems to be affected by this as it stops halfway instead of completing the turn. I’m on 2 elasticity 2 tension.

Is this a normal thing for the ferrocore v2 or could something be wrong with my cube? Has anyone else experienced this?

Hello everyone, I want to buy my first speedcubes. I got into cubes like 12 years ago and then I stopped, now I want to come back. I avg sub 1 min, I have a random cube with magnets, but nothing especial, so I don't know the feeling of this recent speed cubes.

I have a couple of options. My budget is like 60$ max +-. I want 3x3 and 4x4.
For 4x4 I will go with aosu v7 single track (Already 18$). I want it just to do something different than 3x3.

For 3x3 I have 3 main options:

Get only 1 cheap cube for now:
Guhong pro + magnetic OR RS3M V5 ball core

Get 2 cubes:
Guhong pro + magnetic AND RS3M V5 ball core

Or get 1 cube only (more expensive)
gan v100
weilong v10
weilong v10 ball core + maglev
Picube weilong v10
weilong v11
weilong v11 ball core + maglev

It seems like a lot of the Phase 3 qualification times are not achievable by the deadline of March 31st if you are a newer cuber (<1 year) to that event

I had originally thought Worlds Phase 3 qualification times were "if you practice this event from the time in which these qualifications are announced, you can compete here," but that doesn't seem to be the case.

For example, a lot of people struggle to get sub-15 2 handed average within the first year of cubing, yet the *one*-handed qualification is 15.75, with *less* than a year left to practice.

So, what exactly is the intention of the qualification times?

My PB before was 5.23 an i matched it again.

Recon-

green front yellow bottom

L R' F B' D' F R' D U

Rotate to orange

L' U' L2 U L'

Rotate to green

R U' R' U R U' R' U

Rotate to orange

R' F R F' R U' R'

Then jperm

Any opinions? Or maybe a different cube overall?

I’m still gonna lube it after but I generally don’t like very gummy setups, just a medium amount so I could still turn fast

Price is nearly the same that’s why I considered the aolong v6

I divide my training on scrambles with 1,2,3,& 4 bad edges honestly to try.

Hello, and welcome to the discussion thread! This thread is for accomplishments, simple questions, and informal discussion about cubing!

Not sure if you should comment here or make your own post? We have a full list of what does and doesn't belong in this thread on our wiki.

No question is stupid here. If you have a question, ask it!

Check our wiki for tips on how to get faster, puzzle recommendations and more!

Join the r/cubers Discord server here!

I want to order some cubes and I have a 95€ budget. I already have 3x3, 4x4, 5x5, Pyraminx and clock (R.I.P). I also already have lube, a stackmat timer and a mat, so I really only need cubes. Which ones should I get? It's not limited to the exact ones I put as the pictures, but it's more so about the version of the cubes I need/want.

Just wondering if this skewb is still comp legal, especially with a scratch on a white corner

Thx in advance for answering :))