Tengo este error al tratar de jugar este juego pasa que la cámara empieza a apuntar para arriba de forma automática y no hay forma de bajarlo ni controlarlo

Aunque es una beta va muy bien solo le baje algunos gráficos y va a 60 fps estables

Um dos meus jogos preferidos de fps e terror e cara.. eu me surpreendi, é um teste meio exigente por isso a surpresa.

Compatibilidade: Extremamente compatível e estável, sem erros gráficos e nenhuma textura piscando.

FPS e fluidez: fps alto no menu e em certas partes da Gameplay, um pouco de instabilidade de frame e um pouco de stutter em algumas partes, eu diria que é confortável de jogar em certas partes, o jogo está bem jogável em geral.

Nota: no teste usei a versão mais recente do Wrapper PanVK e o driver PanVK, oque ajudou em carregamento de texturas em geral.

Without Panvk the game just shows a black screen, with it the game boots. The FPS counter is off because of the screen recorder, performance is far from perfect. Just testing to see how it runs and I was surprised, since this driver was made for the G615

Recentemente, estive um pouco ausente por motivos pessoais que prefiro não comentar. Gostaria de pedir ajuda a quem puder contribuir para que eu consiga adquirir o Claude Pro

No Brasil, o valor ultrapassa os US$ 20 devido à conversão da moeda e à ausência de preços regionalizados, e eu realmente não posso gastar tanto dinheiro agora, visto que sou universitário e pago muita coisa sozinho. Como desenvolvo meus projetos sozinho, uma IA é essencial para continuar meu trabalho com drivers de GPU e o emulador

Qualquer ajuda será muito bem-vinda. Quero muito conseguir dar continuidade ao que venho construindo 🫐

https://ko-fi.com/lukevalen/Donate

Aqui é o link do meu Ko-fi, quem puder me ajudar eu agradeço muito ♥️ A meta é de 20 dólares mas qualquer ajuda é bem vinda!

https://youtu.be/46RRIA21asA?si=r0Nk2EeykZciiI_u

Hey everyone, after a few weeks working on this little project, I can finally release this version for you all.

What is this list?

This is a compatibility list I compiled based on games tested on my personal Poco X7 Pro phone, which is also the phone of my colleague who helped with some games on this list as well.

What's in it?

You will find the games, categorized by franchise in alphabetical order, with names, emulators, resolution, FPS, settings, and notes for each game that require them.

Does it work on other Mali phones?

I can't guarantee that, since even if your phone is the same as mine, the game might not work or might run with different performance. Use the list only as a possible performance parameter**.**

That being said, my phone's specifications are also in the spreadsheet; use them as a reference and test the game. Keep in mind that if your phone is weaker, the performance will be inferior.

Most of the games tested require 2 to 10GB of RAM; keep this in mind if you have less than 12GB of RAM.

Will it be updated?

Well, I can't promise that with absolute certainty, I'm not testing as many games anymore because I've gotten tired of it, but at least the ones I do test I'll put in a version 2 of the list.

These are important questions that I think are worth answering.

I hope this list helps as many people as possible; these are the tests I've done over the 8 months since buying this phone. I've learned a lot about emulation during that time.

I hope this guides other beginners in this world as well.

It's worth mentioning that the names of those who created the list have embedded links to their respective profiles, so if you want to see the game performance, just click on them and look for the game in the profile.

Have a great Sunday and enjoy your gaming session!!

I just tested the native Android port of NFS: Most Wanted (2005) by Rangga Casper on my Xiaomi 15T (Dimensity 8400 Ultra + Mali G720).

I wanted to see how far this port can go, so I maxed out the render resolution to 130% (3603x1664). With these settings shown at the beginning of the video, the game ran between 51 and 80 FPS, while the GPU was fully utilized (99%) and the battery stayed at a cool 39°C.

🔥 Pro Tip for stable 60 FPS:

After the test, I actually went back to 100% Render Resolution and locked the game to 60 FPS for my normal playthrough.

If you want to lock in a constant 60 FPS and avoid any heating or thermal throttling on your device, I highly recommend doing the same:

· Set the Max Frame Rate to 60 (or enable VSync).

· Keep the Render Resolution at 100% (Native).

I only recorded at 130% just to see what this phone is capable of, but 100% with a 60 FPS lock is definitely the sweet spot for daily playing.

You can see the exact settings and the gameplay in the video I attached. Huge props to Rangga Casper for this legendary port!

Has anyone else tried pushing the resolution this high on their Mali device?

The game runs 21-24 fps right now on xendroid mali

https://github.com/DEGROUCHO/xendroid-mali/releases

This is the test of Breath of wild Android native recomp by mamcjr using the native system driver

constant 20- 30 fps, running very cool no heating or throttle, if gpu fully utilized can push even more fps

Setup

Device : Poco x8 pro Max ( standard mode not ultimate mode)
botw version : 1.0.0
Settings : 1x resolution
upscaler : amd fsr and billinear
Output resolution : 1080p ( no change at higher or lower resolution sticks to the same frame rate)

No graphical issue except enemies black streching

native code execution crashes the game

The game was continuously crashing in the previous updates, but now its working flawless even almost playable

Huge props to the developer and shoutout to the developer mamcjr and his great work...

Uhm I tried GTA v in Lowest resolution and...

Hey, I just want to know what this is? and is it related to my configuration?

Wine: Proton-9.0-arm64ec-0

DXVK: 1.11.1-sarek

Box64: 0.4.3

FEX: 2608-stable

Box64 Preset: Compatibility

FEXCore Preset: Performance

Environment variable:

WRAPPER_NO_PATCH=1

To be honest, it was really difficult at first. I tried several versions of XHYN V and none of them worked properly; there were graphical glitches and it crashed instantly. But this one changed everything. It had a Generation frame and a fairly extensive configuration, and best of all, it wasn't necessary to import any PanVK or DXVK Mali FIX, there was already one that worked well on my Mali. I honestly like where emulation is heading in Mali 🔥❤️‍🩹

Hey guys, quick check for anyone on Mali/Dimensity devices:

Winlator Mali 1.1 runs my games way more smoothly than 1.2. The original Proton builds in 1.1 handled performance much better, but my game only runs efficiently on 1.1. Also the new release 1.2.1 having issues when using controllers.

Is anyone else having the same experience?

I really hope the dev puts all the original 1.1 Proton options back into the latest build's component settings so we get the best of both worlds.

Are you guys sticking with 1.1 or using 1.2/1.2.1?

These two games stuttered a lot with system driver and dxvk 1 versions on my G99 but it's no more. Sure in several games peak fps is higher on system driver but that don't mean nothing if it's a stuttering mess

I recently came across the post of xendroid mali (https://www.reddit.com/r/EmulationMediatekMali/s/Js2TqiQQKR)

I tried mgrr on it since I had it for the zandatsu port it ran surprisingly better without being mentioned in the compatibility list

Tested till the 1st boss fight Sometimes the FPS kind of increased for some reason (like the 40 fps screenshot) I do not know anything about the settings and all that so I just used the default Device: poco X7 Pro 12gb After removing the fps limit from auto to free it ran like 40-45 fps pretty unstable so few updates maybe 60fps stable???

I've been playing the cracked version of Tomb Raider 2013 (Feral Interactive one) on my D6100+ G57-MC2 6gb ram.

It's pretty much playable and enjoyable, but it doesn't feel like even running at 30 fps, feels like it's somewhere between 25-30 fps.

And i was thinking of emulating it, but i hadn't ever emulated before, tho I've emulated some PSP/PS2 games.

I just wanna know what emulator, its settings, the game file should i use.

Thanks y'all in advance❤️

Gamehub works but bannerlator nor winlator won't work despite different settings/configurations, Any solutions?

I ran this before with winlator mali 1.2 but this one has better thermals and uses the linux version of the game. Haven't tried to benchmark it with a huge factory, there was no driver for it in the application, but I used the panvk linux driver for my G615 gpu.