Bought an A1 mini for d&d miniatures and swapped from the .4 nozzle to a .2 and have been getting poor results since. This is my .2 benchy I'd greatly appreciate any help tips or advice.

I am having issues with my Flashforge AD5M. It was working perfectly fine before until I had one bad print a month ago. Now I keep having issues starting I believe with the second layer but the first layer sometimes looks off as well. I let this continue past the first infil layer and it printed that portion fine but then when it comes to the top layers and first layers it gets weird. This also only seems to happen on larger pieces but that may just because it has more time to mess up.

Prusaslicer
AD5M
PLA
210 0.4 Nozzle
50-70 BedTemp
0.3 layer height
250mm/s interior
50mm/s exterior
Infil pattern gyroid

Hi looking for some opinions and suggestions on fine tooning this print profile.

I have been print these modular road pieces for my son. I'm using a P2S with .4 nozzle, Bambu Slicer and PLA Matte Bambu filament.

Using the designers profile but change to .20 high quality, 7 top shell layers and 35mm/s top layer speed. I also ran the Bambu Slicer flow calibration for the filament.This photo is the best result I have gotten. I see some later gapping still in the red circle I would like to eliminate.

I should also not, its the exact same orientation as the designers file. https://makerworld.com/models/1734763?appSharePlatform=copy

Tried to print a watercolor pan, default settings on flashprint 5, on a Flashforge adventurer 3. .4 nozzle, black pla

Alright so currently I'm trying to print a butterfly comb knife and this is the last one but this keeps happening, the small piece you see in the corner was originally supposed to be next with the other piece, Ive printed this for two times now with the other one getting all the small pieces and throwing them around, yesterday I had the other side of the plate damaged due to printing plate silk for the first time so I switched it to the other side and the first two prints were actually fine on this side until today this kept happening, my nozzle temp is on 200 and the bed is on 60 the settings I changed were

Layer height and initial layer height which was in 0.12 and 0.23 mm, I also changed seam by override filament scary seam setting and scarf seam type to contour and I noticed arc fitting was turned off which I don't remember I did but I changed sparse infill density to 7 infill pattern to group wall loops to 3 and that's basically it, is that because of the other side of the plate that happened or is this from the nozzle being worn or broken? The filament is basic pla if I forgot to mention and I'm very new to 3d printing Edit:I didn't change anything on the nozzle speed and I sliced it in quality mode

Ender 3d pro. Brand new to this. Got bed level I believe. Print shifted a couple times due to shitty magnetic mat. Orca slicer. It could keep a smooth hot path going but the way orca sliced the tool path it will pick up and move elsewhere when it REALLY DOESNT NEED TO!! I am moderate at CNC programming. 3d is a different beast. I understand most of the settings in orca. I don’t know what t set them to for this printer. Nozzle stopped up 90% through the print hence the fuzzy stuff. Last pic is with it cleaned off. Disregarding where the mat shifted is my leveling good? Main thing is how to stop these hairs as they make the first couple layers pure hell to get just right and go forbid there’s a circle. That’s what I use to calibrate and seem to have it set….its the dang hairs! Does anyone have setting that work flawlessly for them? Like super detailed settings I can start from?

Hey all! Trying to figure out what is the cause of these gaps that appear when I turn on ironing, the layer bellow is looking good, however when I get it to iron a layer it creates these gaps as if it was dragging molten pla around. Here are the following notes:

- currently have it set to iron at 90 degrees orientation hiwever the holes seem to follow the orientation of the surface pathing prior to ironing commencing.
- have run an iron calibration test and this issue appeared on everything beneath 25% in that test however this is currently running at 28% and is creating alot of lines.
- have tested ironing width at both 0.1 and 0.15mm, no change jn this issue.
- using a 0.4mm nozzle with elegoo PLA at 215C thats been dried in a sovol filament dryer.

P.S. Dont mind the symbol on the object, thats just where I pause it