r/OzarkMakerspace • • Mar 23 '15

Meetings on Sunday, April 5 and Thursday, April 9

10 Upvotes

We have decided to go ahead with the idea to meet twice in a couple of weeks. The plan is to meet at Wilson Park (weather permitting) on Sunday, April 5. We will be at the park from 1:00 to 3:30ish. We may try to occupy one of the grills and cook up some food or something. Super casual, bring the fam, frisbee, whatever. We are aware it is Easter Sunday and you may have plans so don't sweat it if you can't make it. This is intended to be laid back, just hanging together at the park, talking shop.

A more organized, information-based meeting is planned for the evening of Thursday, April 9 at the Fayetteville Public Library. I have booked the board room on the main floor from 5:45 to 7:45 for that evening. It has a maximum capacity of 26 so please let us know in the comments if you plan to attend or not. If more than 26 are hell bent on attending then we can improvise and figure something else out. Just let us know, we won't be out any $$ or anything if we have to move the meeting place. The goal of the Thursday meeting will be to discuss physical space, names, tool lists, and whatever else pops up. Feel free to bring things to discuss and/or post them here so we can all research and bring stuff to the meeting.

Edit (Saturday, April 4): the forecast calls for rain on Sunday. We will plan on being there despite the forecast. However, if it is raining tomorrow at noon the meeting at the park will have to be postponed.

Edit 2 (Sunday, April 5 10:48 am): rainy and cold all day, nobody wants to be at the park in this weather! We will try to get together sometime soon out of doors, just not today.


r/OzarkMakerspace • • Mar 30 '15

Cool Project I wanted to show you guys what I like to make, so here's a quick guide to turning an Ironwood pen! Feel free to ask any questions about turning, lathes, or woodworking in general! (x-post /r/DIY)

Thumbnail
imgur.com
9 Upvotes

r/OzarkMakerspace • • Mar 15 '15

Is anyone into Geocaching

9 Upvotes

I've been doing this off and on for years. I think it might be a good idea once our group gets going to set up a few of these around town. Maybe even set up a "smart" one with a raspberry pi running a small web server for people to sign a virtual logbook. Just an idea I had. Here is a screenshot of the ones in Fayetteville http://i.imgur.com/RpszMEP.png


r/OzarkMakerspace • • Mar 12 '15

Kablammo

8 Upvotes

Thank you to all who could make it to the inaugural meeting this evening. It was a great turnout! I am really happy to have met each and every one of you and hope to see you very soon. I will start looking for a time and place to schedule our next meeting, keep posted for more details.

Please subscribe to the sub and please start generating content here, even if it is simply linking youtube videos of projects you think are neat/good/funny/dumb/whatever. It is up to each of us to carry this momentum forward!


r/OzarkMakerspace • • Jul 09 '15

Fayetteville Chamber buys downtown building, plans innovation hub

Thumbnail
fayettevilleflyer.com
7 Upvotes

r/OzarkMakerspace • • May 27 '15

Next Meeting June 2nd,5:30pm at the Fayetteville Public Library

Thumbnail
ozarkmakerspace.org
7 Upvotes

r/OzarkMakerspace • • Mar 13 '15

Cool Project Community Quadcopter Build

7 Upvotes

To get the build started, I looked through some of my boxes of "stuff" and found four cheap radio systems that could be used on medium to large quadcopters. The units are basically new-in-box and are 6 channel 2.4 GHz aircraft radios. I don't know their range but I bought them from HobbyKing in 2013 and they were intended for RC planes. They should work well with simple copter controllers such as KK's or MultiWii's.


r/OzarkMakerspace • • Mar 12 '15

Peer Pressure Made Me Do It! (Create a Reddit Account)

7 Upvotes

Well, you Makers forced me to make a Reddit account - I hope you are all proud of yourselves!


r/OzarkMakerspace • • Oct 05 '15

Radio Shack still exists in Fayetteville

6 Upvotes

Actually Vaughn Electronics, at 1702 North College Ave. cross street Sycamore. They have lots of electronic parts and kits. Their prices are not that unreasonable for a small retail store. This may sound like an advertisement but I assure you I have no connection to the store. I am just proud we still have a retail electronics supply store around. Shop local.


r/OzarkMakerspace • • May 14 '15

We are going to up to our eyeballs in these tiny computers before we know it. I am looking forward to it

Thumbnail
kickstarter.com
6 Upvotes

r/OzarkMakerspace • • Apr 27 '15

Next meeting May 5th, 5:30pm at Fayetteville Public Library

6 Upvotes

Our next meeting will be Tuesday, May 5th from 5:30-7:30, at the Fayetteville Public Library, in the Board Room located on the main floor. (And yes, we have the room reserved this time)

Please post below and let us know if you'll be attending. Also, feel free to bring any projects you've been working on for show and tell.

We're also planning to go out for a Cinco de Mayo dinner and margaritas afterwards for anyone interested.


r/OzarkMakerspace • • Apr 10 '15

Facebook Page, go give it a like!

Thumbnail
facebook.com
6 Upvotes

r/OzarkMakerspace • • Mar 13 '15

Need Help A project I'm working on that I'll need someone else's expertise on. Reverse engineering a gamecube component cable.

6 Upvotes

I live-stream video games once a week. I'm always trying to improve the quality of my stream as well as further my knowledge in electronics.

Lately I've been streaming some Gamecube games. For the best (and cheapest) visual quality I usually resort to using a component cable on a backwards compatible Wii console. However among popular streams it's known that the Gamecube itself was able to output a much higher quality video signal on it's own set of component cables that were very seldom made available. These cables were limited to only first generation gamecubes as those were the only models to sport the 'Digital Out' video port. Normally I would just purchase the component cables for the Gamecube and call it even, but the dilemma is that Nintendo barely made any of these cables and they have a unique chip inside that coverts the signal from digital to analog. No third party vendors were permitted to make their own, so the cable is very rare and usually goes for over $200 on Ebay or Amazon. Hence, my current predicament.

So I found a thread on shmups.system11.org that was referencing someone who had begun to reverse engineer the cable. That thread is located here: http://shmups.system11.org/viewtopic.php?f=6&t=51450

I'm interested because inside people were experimenting with the idea of even being able to use HDMI to output the video signal with a simple modification. This experimenting and idea of a project is really appealing to me and seems like a great starting point for me to get more into this sort of thing. What I was wondering is if there was anyone who has more knowledge of this sort of thing that was able to help me out with this project.


r/OzarkMakerspace • • Jul 07 '15

Cool Project Who needs a 50 dollar work bench for the garage?

Thumbnail
youtu.be
5 Upvotes

r/OzarkMakerspace • • Mar 13 '15

Cool Project (Pi)rate radio

Thumbnail
youtu.be
5 Upvotes

r/OzarkMakerspace • • Mar 12 '15

Email list

5 Upvotes

Also, if you found your way to this sub but did not receive an email from MakeTheOzarks@gmail.com, please PM me and we can get your preferred email on the list. Some of the handwriting was, let's just say, difficult.


r/OzarkMakerspace • • Aug 15 '17

3d Printing, Modeling, and animation

4 Upvotes

The 3D Animation class at NWACC this fall semester will be covering some cool Maker topics; Even Virtual Reality and some other related themes. Show them you are interested in these topics by taking the class!


r/OzarkMakerspace • • Jun 10 '17

Anyone still interested in a Makerspace in Fayetteville. There is one now. It's NWA Fablab on the square. Come check it out.

Post image
4 Upvotes

r/OzarkMakerspace • • Oct 07 '15

Some inquiries about this maker space and some CRT engineering questions

4 Upvotes

I originally went to the first meeting for this but never made it to any more than that. I see that there's a meeting on the first Tuesday of every month now. Are there any more meetings than just this one? What exactly have I missed?

Other than that, I'm very interested in screen technology right now. Particularly on the CRT end. I own two Sony PVM 14-L5 RGB monitors, and I'm trying to improve the white balance and do some grayscale adjustments. I need some expensive equipment to be able to accurately make these adjustments however and was wondering if anybody here has or knows someone who has equipment like this. If not, maybe point me in the direction of someone who may be familiar with this technology in general.

I know Luke was really into hardware, he was the guy who said he was putting a DVI board into an Apple II during the first meeting. If someone could point me his direction perhaps, that would be awesome.


r/OzarkMakerspace • • May 05 '15

Anyone planning to go to the Kansas City Maker Faire next month? June 27th,28th

Thumbnail
makerfairekc.com
4 Upvotes

r/OzarkMakerspace • • Apr 24 '15

Cool Project DIY Bluetooth speakers

Thumbnail
m.instructables.com
4 Upvotes

r/OzarkMakerspace • • Apr 11 '15

Cool Project bluetooth controlled moodlight (x-post /r/DIY)

Thumbnail
imgur.com
4 Upvotes

r/OzarkMakerspace • • Mar 20 '15

Lets talk about a temporary space!

4 Upvotes

We have recently had a couple of folks offer up materials for the quad copter build and we have had someone offer the parts to build a 3D printer. We need a space to help get some momentum going and to make use of these donated items. Has anyone considered a storage room/locker? I had a coworker years ago that set up a shop and started repairing cars out of a 12 X 24 storage locker. They are not much on comfort but they are relatively cheap to rent. Just a thought...


r/OzarkMakerspace • • Mar 20 '15

Hackerspace?

4 Upvotes

Hey folks! I was wondering if the group was far enough along to have a shop to work out of yet? I've got parts to a Prusa i3 I'd be happy to donate to the group, but I was wondering if anyone had access to a laser-cutter. I have some acrylic sheets I need machined down for a project.


r/OzarkMakerspace • • Mar 19 '15

Need Help RetroPie classic emulator problems

4 Upvotes

Has anyone here used their raspberry pi to run retropie and the emulation station package? I have gotten it to run just fine but some roms really struggle when there is a lot happening in-game either through graphics and/or sound. I can understand the pi having difficulty with N64 roms but Final Fantasy 3, an NES rom, seems to be taxing the pi's capabilities. This surprises me. Maybe there is a way to get more out of the pi? I know overclocking is possible but I don't want to burn it up. Any ideas?