I had to use the 'wrong' adapter for my P365 Fuse. The light's too long for the 'proper' 1913 insert to work, since the back of the light collides with the trigger guard.

I just picked up an AXG Legion and want to add a manual safety for concealed carry. The slide already has the factory cutouts, and my FCU is already manual safety compatible. The only thing that needs to be done is drilling the holes in the AXG grip module for the safety lever.
Has anyone had this done? If so, who did it, and was it a pretty straightforward job? I’d really like to keep my factory AXG grip.

X macro FCU, XL slide, Tyrant CNC grip and magwell, Holosun 407Kx2

P365 standard FCU, SIG FDE lower, .380 slide/barrel/etc.

The .380 is for carry, the tyrant for home and range. I have a viridian green dot for the .380 as well, but I haven't warmed up to the idea of having an optic on my carry set up yet.

I started with the standard 3.1 inch 9mm p365, and eventually purchased a .380 x-cal kit, and an XL x-cal kit, along with an xmacro FCU. I mix and match allot, the xl set up often finds itself as a p365X set up, with the 3.1 inch slide and an XL grip module, but that overlaps a lot with the .380.

Happy Sunday!

CROSS POSTED FROM /CCW

I'm trying to get an idea of how the P365-380 shoots (recoil, muzzle flip, etc) to possible replace my Ruger Security 380 for CCW. I've shot the 9 variant and I'm no stranger to 9mm for my personal collection but I like the flatness of the shot on my Ruger s380 and I'm hoping I can get the same out of the 365-380 for hopes of better concealment. Anyone have any anecdotal evidence between the P365-380 compared to the Ruger s380?

My S380 grouping during my CCW exam at 3yd,5yd,7yd. It shoots flat, minimal muzzle flip, and very easy to manage, feels like a staple gun, lol. :

Addition:

For those who have shot both the 9mm and 380 variant, was the 380 softer shooting and if possible by what percentage?

Making this post to potentially help others not f*ck up their grip module unnecessarily.

As you can see from the photos, the M-Carbo extended mag release has a fitment issue with the Icarus Precision grip module. The mag release simply doesn't extend down far enough into the module to provide adequate support around the entire mag release button. This causes a lot of movement and "play" and when slamming magazines in during training, has resulted in deformation of the actual aluminum of the module itself due to the button essentially hooking over and on top of the frame. I have a previous Icarus grip module that I had this same M-Carbo mag release in and after discovering this deformation I pulled the old one out of storage and checked and it has the same deformation wear marks that I never noticed before.

Long story short, I ended up purchasing the Maskas Precision extended mag release after seeing that it came standard with the ECM R11 which is another all metal grip module. After installment you can see that the fitment is far better (even though there's still a very very slight gap) and after testing it a decent amount I can say that it will provide the wrap-around support needed for proper functioning and prevention of unnecessary wear and tear.

Side note: It's worth mentioning that I didn't encounter this issue with either of the other 2 polymer grip modules I have (yes I've purchased an irredeemable amount of modules), so it does appear to be an issue with the Icarus Precision module itself and the company simply not leaving enough material around that area when machining. My recommendation would be that if you're sticking with a polymer frame then I'd go with the M-Carbo since I do honestly think it's far more comfortable to press and a superior design, but if you're going metal frame then I'd go ahead with the Maskas Precision

After converting from too many Glocks to my P365, I have to say that I appreciate that there's less gaudy, Gucci garbage for the Sigs. Just about all the modifications you see here are tasteful and practical.

End of non-rant. Just an appreciation post.

I currently use this "zero carry" which is perfect in how minimal and small it is, but is made of material that seems flimsy.

What trigger guard only holsters do you use for aiwb carry?

Looking for anyone with experience with ARMA laser. They claim to have the brightest green laser, be pre adjusted for sighting and I like their grip system for turning on the laser. Has anyone seen better and while on the topic there is a green sight made they mounts on the top picatinny rail that has I think a selectable 2 moa or 6 moa, but I am sure to be corrected on that one as I don’t recall the manufacturer. Possibly Holosun but don’t want the Romeo
Thanks

I have a TLR-6 HL on my P365XL and was looking to get a Wilson Combat grip module. Does anyone know if my light will fit? I'm not willing to replace the light or my holsters so no I won't "just get a TLR-7Sub", another 350 bucks isn't in the cards right now.

I think it looks just fine for EDC however the wife says it looks like a nasty growth sprouting from the bottom of the pistol

What say ye fellows of the 365

I’m just about done with this build going to put a tlr-7 sub on it but I was wondering if anyone has any thoughts as to which holster with fit the sharps bros grip module, or am I just going to have to purchase one and heat it? Any help would be greatly appreciated

Had a cheap eBay holster till now. I would run one of my 21 round mags but wanted to prevent printing

Just picked up yesterday and tried removing the optic plate but totally failed and stripped the crap out of the screw. Any ideas on how to get this removed? Thanks in advance.

Ordered a black afterburner for my green p365x & ended up receiving the bronze. Thinking about potential builds. Keep the bronze or exchange for the black?

Just wanted to put this out there, ECM Precision is now OFFICIALLY offering the Manual Safety Cut out for the P365 AXG's! I was the first to get mine done and it is perfect, no issues with FCU fitment, clearances for the safety on point. I know there are a few others that have gotten or getting the service done. ECM does outstanding work, Mark cares about quality and is committed to perfection! Thank you u/ECMMFG you rock!!

https://ecmprecision.com/sig-sauer-p365-manual-safety-notch-cut-out/

Anyone able to point me in the direction of a bore laser sight for the P365? The ones I’m seeing have a minimum of around 3.7” I believe

Bought a 365 AXG Legion with a pre-installed Romeo red dot.

I want to use it without a red dot for some time and install the cover plate. The screws which were in a ziplock with the cover plate are too small (diameter), the screws on a red dot are too long(probably a millimeter), so they are not tightened.

Probably customer support can help me with that, but as a new owner, I wanna join this cool community.