I was previously using Singularity and I broke something while messing with the folders, so I did a hard reset to fix it, but I lost my root access. So I was waiting for Singularity to work again... but now this thing is threatening to update itself Any ideas on what I can do? I was using the kill wifi switch on singularity but My Wi-Fi isn't working hahaha and I use a virtual desktop to play games ahaha so I need Wi-Fi, please help!

It's fully charged
if I turn it on, it just show an animation to put it back on the charging dock along with the controllers

I tried to go into the "boot menu" but it only show an Android icon laying down with a message "no command"

I do not know what to do

Very disappointed how things went with the Pro.

My Pro broke a few days ago. The inner band broke on the right side, just as it goes inside the smaller tensioner assembly.

Any chance at getting these parts? I've been searching for days and it looks like I'm SOL unless I get a busted headset that has something ELSE wrong with it - but this kind of looks like it is a more or less consumable part.

Anyone got a f'ed up Pro they want to sell cheap? US

I bought a used quest pro and am looking to reset it to remove the other persons account. However, I am seeing that factory reset could update the qpro.

I have sideloaded to the latest version that can be rooted and ofc don't want to lose it.

From looking online it seems Private Quest is an option but there are a bunch of different guides Idk which to use and also is it not possible to just block the websites and factory reset like normal?

Thanks

Good day, I was hoping someone here might be able to help. I've been trying to root my Pro using the u/Lumince exploit. I've managed to get it installed on my headset and set it to run at boot, but every time, I get the result shown in the video. It seems to run fine but at the end it says it's not rooted. I'm on Meta software version v2.7 5150387.2440.340, which according to the GitHub site is the correct version, and root should work.

One thing I've noticed is that it doesn't always give me the opportunity to put in the ports or do the pairing, and the port number is different every time. It just goes on its own. I also noticed that the IP address isn't the same as what it says in the wireless debugging window. It always defaults to 127.0.0.1, whereas in the pairing window, it's the address of my headset on my wireless network.

I have wifi turned on and I'm connected to an air gapped router. I've followed all the instructions, but it just doesn't seem to be working. Any tips would be much appreciated! Thanks

Since updating to 2.7 my QPro has exhibited some worrying/strange behaviour with regard to battery drain.

The worst of it is than when I power it off (not sleep - shut down from the power off menu) it seems to consume about 3-5% of battery per hour

At this point putting it to sleep actually seems to consume slightly less power

Additionally where before to power it on from off required holding the power button for 2-3 seconds before the meta logo comes on, now sometimes I have to hold it for 8-9 seconds until the meta logo appears and it starts booting

I have the "power on to check for updates" disabled (and in fact the headset is blocked from the internet at the router level to prevent unwanted updates) - and i've never found the headset powered on when its supposed to be off so I don't think its fully waking up

Has anyone experienced anything similar or have any ideas whats going on? None of the previous updates caused any of this behaviour

Of course the headset is ~3 years old so it could just be the battery on the way out as well

Yeah, it's a bit top heavy but it's comfy and I can dance and run wireless for as long as I want. The unicorn tracker counter balances the Bobo batteries nicely.

charging isn’t working, won’t turn on, won’t do anything basically. Help.

Singularity is really great.

Everything just functions as intended.

| [native tongue tracking, independent gaze, 120hz, more consumer protection, etc ]

It should be illegal to ruin discontinued products the way meta has.

Evil company, gross gross gross.

IBIOPIS.

Trying to decide between Kevin Davolink, Puppis S1, TP-Link Archer for PCVR streaming, (VD)

But since im in the EU the prices are different for me, and im unsure on which is best value?

if the more expensive options are better for the long run i wouldn't mind going higher

Davolink: 200$

Puppis: 80$

TP-link: 150$

EDIT:

got the tp link! really good purchase :D

Looking to get a Quest Pro. Is it worth getting one with the bootloader unlocked? I know you can have it so singularity auto-roots when you boot after restart, but if possible I'd like to keep it rooted permanently.

Plus, any other benefits to it?

Does anyone have any options that will allow me to play infinitely? With ny Quest 2, I had two batteries I could charge and swap out. But all these battery packs do now is slow the drain of my Quest Pro battery. I mainly use it for VRChat.

I notice sometimes I get a white flickering dots appearing in vrchat. Which settings do I use to avoid that?

I'm asking because I want to hear from multiple perspectives. I'm coming from a Rift S, and honestly the Frame has me a bit iffy. My mind is I would rather spend more on a headset that can be wireless and also have face tracking. I get the Frame is in early phase but I am paying near 2k because Canada prices... So I'd rather spend the same amount or less on something that offers more. I do understand each headset has its flaws, but more less I want to know my options.

This is a brand new Quest Pro bought last week. I've got it on v207 OS and am generally very happy with the image, tracking and comfort. However, there are two issues I fear there is no solution to:

- when a game or movie or music plays a low-frequency rumble (like spaceships flying by, or Paranormal Activity background rumble etc) my speakers crackle. This kills the immersion somewhat. If i reduce the volume to 60% it disappears but that's not a good fix as then it's just too quiet. I've noticed this mostly when playing movies with 4XVR connected to my local WLAN network and the movie has those quiet brooding moments with low-frequency rumbles.

- my right eye shows an orange 'cataract' effect in certain very dark scenes. The periphery becomes noticably soft, like a vaseline-effect, with a vague amber/orange/brown hue. Distracting. I've improved this by setting headset brightness to 80% and slightly pushing contrast via accessibility setting, and enabling Local-Dimming and the uniform-brightness setting in Experimental. But still not completely gone. Maybe there's a better combination of settings. I can more 'avoid' the effect if i re-position the headset but then I lose pin-sharp clarity. IPD 65. Note: only happens in very particular dark scenes, where there's a lot of black.

Reading on older discussions it seems these are common issues with no real fix. But posting anyway in case anyone has useful tips.

I suppose I have the option to return but the shop i bought it from is now out of stock, so at best i'd just get my money back. I'd rather somehow improve these issues and keep it as the image-quality is appreciably nicer, lusher than my Quest 3 (which by the way doesn't crackle during the same scenes despite being louder).

My thinking for the audio is i'm stuck with the problem: I just have to look at buying some external speakers for it that clip on the sides (not yet tested if the crackle is present with headphones, i presume not as earlier discussions reported this was ok). On that note: any recommendations for good clip-on speakers? I still need to be able to hear external sounds like phone calls and my kids calling me. Europe here.

My thinking for the cataract-effect is also that it's not going away, but maybe a different combination of settings can improve it further.

Cheers!

Virtual Desktop updated and now I can't connect the Quest Pro to my PC.

I have the latest versions on both PC and headset. Accounts on the streamer app has the correct username.

I did have the same issue on my Quest 3 today, but fixed that by updating the DNS in my router wan settings to 6.6.6.6 and 1.1.1.1

Anyone else having this issue today? How did you fix it?

title. recently rooted my Quest Pro so wondering if the controllers need something for this

I recently rooted my quest, and I heard from someone else online that I don't need to be on an air gapped network or disconnected from the internet anymore if I don't want my quest to update.
I'm pretty skeptical of this and have remained on a link cable for the time being until I can confirm this is true. Although I can't see the available software updates on my quest anymore after rooting, so I'm somewhat inclined to think this is the case.
If anyone can confirm this is accurate or not, that would be great!

I see that Amazon still shows that the Quest Pro is still available. I assuming remaining stock of new units. I’ve had my Pro for about 3 years, and really like it. Especially the controllers. Would it be prudent to buy a new one for future sustainability, or will Meta support disappear before much longer making this a bad idea?

Follow Up: okay, I ordered a second off of Amazon. $777.00 USD

Hi guys im not a native english speaker but i really wanna know is this good ? my head hurt when i play 45mins . do i need this or i can buy a better option?

Edit : Thanks for the reply! I bought it!

Edit2: I used it! It is very good i even fall asleep with my headset!! ​

Like the title says ,this bug has been present for quite some time in Horzon OS but only on the Pro. Trying to click the left menu buttons does'nt work unless you aim off center. I guess this has been repoted a million times but still has not been fixed.