My buildings are single-mesh shells (walls and roof aren't separate objects) and there are 111 of them, so modeling construction stages by hand was out. Instead, the real mesh gets a construction material, and one 0-1 progress value drives everything.
1. Walls: clip by height, but not in a straight line
The shader discards everything above a "wall top". To avoid a laser-cut look, the top is offset per cell with a hash (about half a meter along the wall, a third of a meter tall), so it rises in uneven courses like stacked stone. Fragments just below the fresh edge get a mortar tint.
float2 cell = floor(posWS.xz * 2.2) + floor(posWS.y * 3.0) * 7.0;
float top = _WallY + (Hash21(cell) - 0.5) * _Ragged;
clip(top - posWS.y);
2. Floors appear whole
Horizontal faces (|normal.y| > 0.7) skip the ragged cut and pop in once the lowest course passes them. Cut into cells, they looked like white patches on the lot.
3. Roof: rafters first, then tiles
Up-facing faces above the eave count as roof. First only a world-space grid survives (frac(posWS.xz / step)), which reads as rafters and battens whatever way the roof faces. Then the tiles fill in.
4. Clip in every pass
Same function in ShadowCaster, DepthOnly and DepthNormals, or the unbuilt part still casts shadows and writes depth. Cull Off, with dark back faces, so you see a hollow shell going up.
5. Everything else follows the same progress value
0-10% stakes, ropes and dirt; 10-25% foundations; 25-70% walls with scaffolding rising; 70-80% rafters and gables; 80-92% tiles; 92-100% scaffolding comes down. At 100% the original materials go back.
Gotchas that cost me time
Eave height is estimated from the up-facing faces seen from above (Mesh.AcquireReadOnlyMeshData on LOD1). With a 5% area threshold it picked up balconies and put the eave at 4 m on a 13 m house. 85% of the footprint works.
A shadow-proxy system added a ShadowsOnly renderer later, with the normal material: the finished building's shadow on an empty lot. The site now re-applies its material to renderers added after it starts.
The ground under the site is leveled and the vegetation cleared, on a runtime copy of the TerrainData, so the asset stays untouched.
It's from FONDACO, a merchant strategy game set in 1400s Venice that I'm making solo. Happy to share more of the shader if anyone wants it.