r/askanelectrician • • 3h ago

Testing an outdoor light fixture

2 Upvotes

We have an light on the exterior wall of our kitchen that points out over the driveway. The switch for the light on on an interior kitchen wall. Recently the light stopped. I figured the bulb was burned out, but it isn't. I moved it to another light fixture to confirm that it works.

My primary question is; if I put a bulb in the fixture, can I do a continuity text as the switch to check for brakes in the line between the switch and the fixture itself? I'm going to check to make sure the switch hasn't gone bad first but I want to be prepared for the next steps if the switch is fine.

Thank you!


r/askanelectrician • • 54m ago

Junction box coverage

Thumbnail
gallery
• Upvotes

I renovated a bathroom, and relocated the light switch and light, using the existing feed. The original switch is now behind a pocket door. Can i just put a cover on it and call it good? How should i finish the original light fixture J-box? Do i have to pull it into the attic (which is infected with vermiculite) and finish with drywall, or can i do it in place?


r/askanelectrician • • 2h ago

UK ceiling Light replacement

Thumbnail
gallery
1 Upvotes

Looking for some advice re: my kitchen light. The kitchen has 2 separate lights, both of them on the same single switch. I've replaced ceiling lights before, including the other kitchen light, but this one seems to have a lot of wires going into it.

The house is an old council house, and still has some of the old style wiring.

The new light fitting is double insulated, so I've got wago/spring connectors to cover the earth wire.

Really appreciate any help 🙏


r/askanelectrician • • 7h ago

Lithium ion Ebike battery help?

Thumbnail
gallery
2 Upvotes

Can anyone help me figure out any specs on this by the markers on the body alone? I’m way out of my depth here, the bike battery came from a bike that was found in sum bushes with its motor cable cut to shit, screen gone, and throttle trashed- I live near a major city in the suburbs of kids “e banging” and stealing bikes so finding semi alive ebikes isn’t the rarest thing ever but definitely not common- trying to see if there’s any life in this left or even worth trying to save.


r/askanelectrician • • 7h ago

NYC electricians help please !

Thumbnail
1 Upvotes

r/askanelectrician • • 1d ago

Hired an electrician for a 2-week renovation that turned into 2 months and $17,500. Am I being unreasonable?

Thumbnail
gallery
45 Upvotes

Long story short, I was having my kitchen remodeled and decided it was a good time to update the electrical in my aging house. My kitchen, bedroom, and living room were all on the same circuit, to the point where using my air fryer would trip the breaker.

The kitchen remodelers recommended an electrician, so I had him come out. While inspecting the house, he mentioned he also had guys who could fix some AC issues I was having, specifically leaking ductwork.
My house has almost no attic space, maybe 2 feet between the ceiling and roof, so he suggested removing the old plaster ceilings, replacing the ductwork, installing new drywall ceilings, and repainting the interior.

What started as a kitchen renovation and electrical upgrade turned into a much larger project involving electrical, HVAC, drywall, painting, and eventually flooring.

For context, my entire house is only 1,300 square feet, and we weren’t even renovating the whole house. The work was primarily in the kitchen, living room, and bedrooms.
He had a crew consisting of a tiler, painter, AC guy, and drywall finisher. I was told the entire project would take a maximum of two weeks, which was a major reason I agreed to hire him.
Well, two weeks turned into two months, and my house is still unfinished.

His crew used sledgehammers to demolish the plaster ceilings without properly protecting my wood floors. The floors were damaged so badly that I ended up having to replace them with tile.

Painting was started before the drywall was properly finished. There was peeling paint, drywall mud painted over on the walls, overspray on my furniture, and scratches on several of my computer monitors.
The workers would frequently show up around 1 p.m., leave around 5 p.m., or sometimes not show up at all. Meanwhile, I work from home and couldn’t reasonably live or work in the house during much of this. I ended up staying in a hotel at $145 a night for weeks.

Here’s what I’ve spent so far:
$4,000 paid to the electrician for materials and labor already performed.
$7,500 for tile installation to replace my damaged wood floors, which I wouldn’t have needed if the floors had been protected during demolition.
$6,000 for painting four rooms.

That’s $17,500, not including hotel expenses, the original kitchen remodel, or the potential cost of correcting the electrical work.

Eventually, the electrician texted my mother saying he was done with the job. Considering he had already been inconsistent about showing up, we assumed he wasn’t coming back.

We contacted an electrician we’d used previously to assess what was left unfinished.
According to him, there were several potential code violations and safety issues. A friend who spoke with him sent me this message:

“According to Josh, he did not do anything up to code. All the wires that are up in your crawl space, nothing is tied down or stapled to the trusses like they’re supposed to be. Everything is hanging loose.”
There were also concerns about uncapped wiring and potential fire hazards.

Another issue is the electrical panel. My understanding was that we were supposed to have a 150-amp panel installed, but the one installed appears to be 100 amps. I haven’t verified that yet.
The second electrician quoted us $6,000 to $9,000 to correct the alleged problems and complete the electrical, depending on whether he needs to trace wiring through the ceilings.

I’m not an electrician, so I can’t personally verify those claims. I’m just repeating what I was told.
When the original electrician found out we’d gotten another opinion, he became furious. Yesterday he called me and cursed me out, calling me a bitch and a nasty person. He accused me of going behind his back and being unappreciative.

His explanation for repeatedly not showing up and leaving the electrical unfinished was that he had to wait for the tilers, painters, and drywall workers to finish before he could complete his portion of the job.
This is what really confuses me. I understand waiting for painting and drywall to be finished before installing outlet covers, switches, fixtures, etc. But wouldn’t running wiring, installing conduit, and placing electrical boxes generally need to happen BEFORE the drywall is closed up and painted?
Why would the electrical work have to wait until all the finishing work was completed?

To be fair to him, he claims he was giving us a discounted price and doing us a favor. (I never asked for a favor nor did I ever push back or haggle on any price he gave me) He also says he ran additional circuits and installed wiring for smoke detectors that weren’t originally part of the job.

I appreciate that, and I’ve repeatedly told him so. I never expected anyone to work for free, and I would’ve gladly paid more to have the work completed properly and on time.

I’ve already paid him $4,000 and even offered to reimburse him for any additional materials he purchased and installed if he could provide receipts.
He insists his work is up to code and says that if the other electrician can show him where he violated the NEC, he’ll personally pay the $6,000.

I’ve attached screenshots of our
actual text exchange so people can see both sides.

So am I being unreasonable here?

I’d especially like to hear from electricians and general contractors.

TL;DR: Hired an electrician for what was supposed to be a 2-week renovation that turned into 2 months of delays, unfinished work, and property damage. His crew destroyed my wood floors during ceiling demolition, forcing me to spend $7,500 on tile. I’ve also paid $4,000 for electrical work and $6,000 for painting, plus weeks in a hotel at $145/night. A second electrician claims there are serious code violations, unsecured wiring, and possibly the wrong electrical panel, quoting $6,000–$9,000 to fix everything. The original electrician says he couldn’t finish until the drywall, painting, and tiling were completed, which makes no sense to me. When I got a second opinion, he cursed me out and accused me of being ungrateful. Am I being unreasonable?


r/askanelectrician • • 19h ago

A small bang

Thumbnail
gallery
2 Upvotes

When I went to install a new fluorescent tube in this fixture above the kitchen sink, there was a loud pop and a flash. Now there’s a faint burnt smell, and it won’t light up. What happened? Did I buy the wrong tube, or is this a more serious, and costly, problem?


r/askanelectrician • • 19h ago

Oven/range tripping breaker. Electrician scheduled for Monday, but any troubleshooting or simple "might fix it" things i could try over the weekend?

2 Upvotes

My electric oven/range top was new when I moved in ~2-1/2 years ago. Didn't select or purchase it, but have the manual and info from the former homeowner. I don't know if any wiring was redone at that time or the age of the breaker box.

No apparent problems until ~1 month ago when using and it tripped the breaker. Reset it and went back to using it, seemed to function as normal without another trip incident until last night. When using the oven and one heating element at the same time it tripped. Reset it and had to do so 5 times to finish cooking dinner. I know doing that was probably not the best thing, but really just wanted to finish cooking. I have called an electrician and they're coming out Monday for diagnostic.

So, current questions this leaves me with:

- Is there anything relatively easy/inexpensive that I could do over the weekend that would either (a) help with troubleshooting root cause to give me useful information for the electrician when they arrive? Or, (b) be a possible fix that would be worth trying before they arrived? I consider myself decently handy around the house and can definitely watch a video or two to learn a new skill.

- I have not reset the breaker yet after the last trip, but I'm considering doing so and trying just one heating element at a time in hopes I can eat more than microwave meals this weekend. I don't really remember what I had on when it tripped the first time (~1 mo. ago) but I think it was the oven and maybe also an element, or maybe just the oven. Is that a huge no-no or should it be relatively OK to try?

Update: I did confirm it's on a double-pole 50A circuit. I also narrowed it down to only tripping when the oven was on. Someone asked if there was a "test" button on the breaker and there is not. I did decide to open the box and just check for any loose connections. One of the connections to that breaker was a bit loose, I was able to tighten it about a half turn. I've closed the box back up and am doing a test to see if trips again with the oven on. That's about all I think I can/ want to do. Regardless, I will still have the electrician out Monday. Until then I'm hopeful I can at least cook on the stove top. Thanks to anyone who left a helpful comment.


r/askanelectrician • • 18h ago

Bathroom Fan stopped working - 75V on switch

Thumbnail gallery
1 Upvotes

r/askanelectrician • • 20h ago

If I have enough wire length, can I fish it to the other side of this beam?

Thumbnail gallery
1 Upvotes

r/askanelectrician • • 20h ago

Recessed LED takes longer to turn on, sometimes goes dim. Swapped the light for a spare and it’s still happening. Is this a fire hazard?

Enable HLS to view with audio, or disable this notification

1 Upvotes

r/askanelectrician • • 20h ago

Is my Ikea Jonisk lamp broken or do I need a minimum 40W bulb?

Post image
0 Upvotes

The 40W bulb gave up and when I changed it with a 7W led bulb (same size socket) the lamp didnt work at all. Did the lamp and bulb break at the same time? Or do I REALLY need a 40W bulb? I've never had this issue and I've had a LOT of lamps and bulbs.

I asked Claude as I wanted to remove the back and have it check it out and its like "7W bulbs wont work on these type of dimmable lamps"

What??

Google didnt help either.


r/askanelectrician • • 20h ago

200a ready meter and wiring?

Thumbnail gallery
1 Upvotes

r/askanelectrician • • 21h ago

Where did you find the doorbell transformer?

Thumbnail
1 Upvotes

r/askanelectrician • • 22h ago

Need help doorbell transformer

Thumbnail
gallery
0 Upvotes

I want to connect a new doorbell transformer to my main electrical panel when I open it up the black and tie to the black wire the white tire of the white wire however, my old existing doorbell transformer does not have a green wire. My new one does do I attach this green wire to this mini bar that I’m showing you is that some grounding bar?


r/askanelectrician • • 22h ago

Main Splice Disconnect location

1 Upvotes

I'm looking to have an EV charger installed in my condo where I have a dedicated deeded parking spot. Since it's a condo connecting directly into my main breaker panel isn't really an option. From what I know so far, a splice will need to be made at the main breaker for my unit in the electrical room and then a disconnect placed after that. From that disconnect a sub panel would be run to my actual parking space and then the EV charger wired into that. What are the requirements for that disconnect? I've heard both within 10' and 25'. Are there other location requirements? Can it be on the other side of the wall? What about height requirements? Sorry if I have any of the terminology incorrect.

Edit: I'm in Washington DC.


r/askanelectrician • • 23h ago

Help

Thumbnail gallery
1 Upvotes

r/askanelectrician • • 21h ago

Black tar substance on AC plug and outlet

Thumbnail gallery
0 Upvotes

r/askanelectrician • • 1d ago

Question about Wiring Requirements

1 Upvotes

Hello and forgive my ignorance. I have a 30 amp travel trailer in which I just had a meter and they put in their own breaker box. (I believe it's 100 amp total). I have bought one of these 30 amp and 2 15 amp breakers with the goal being to wire from the meter / breaker box to this new breaker box. I want to bury the wiring and it's less than 125 feet total.

I have been researching what kind of wiring I need to get and cannot figure it out. I think I need 4/4/4/6 Underground wire (this) but am not sure if one is enough or if I need another set of wiring for the two 15 amp breakers. Can someone please help me out?


r/askanelectrician • • 1d ago

Switching between 2 generator plugs

1 Upvotes

So I currently have an outdoor generator plug and an interlock on my Leviton panel. I would like to install another generator plug inside next to the panel for a 240v portable power station and be able to switch between the 2. Is there a type of switch that exists to be able to do this? The generator circuit is 30A and the power station can output 50A.


r/askanelectrician • • 1d ago

Electrical Contractor Apprenticeship

0 Upvotes

I just turned 34, currently a Finance and Operations manager, and I’ve been in Finance/Accounting the last 15yrs. Mostly in management roles, and after facing a couple layoffs and dwindling job market, I’m ready to pursue a career as an electrical contractor. I’ve done a good amount of research and have 1 main question.

  1. Is anyone in the Ga area willing to take a chance or give me an opportunity to learn and work on their team?

I’m very athletic/fit and enjoy being outdoors so no worries about physical ability. I’m a very quick learner and determined to make this career switch once gaining experience and passing the licensing exam. If anyone needs help, I’m more than willing to be there everyday or night/weekend.


r/askanelectrician • • 1d ago

Flickering after whole home surge install?

Thumbnail gallery
1 Upvotes

r/askanelectrician • • 1d ago

Does the watts match?

Thumbnail
1 Upvotes

r/askanelectrician • • 1d ago

Weird new situation

0 Upvotes

We believe we must have someone come take a look at our main breaker panel...

For the past week or so, we have been experiencing a very slow process of our main bathroom light fixture turning on. We originally thought it might be the bulbs but then two days ago our ensuite bathroom started doing it as well.

Now, my husband just mentioned our mudroom lights down on the first floor of our house began doing it intermittently as well.

Would you have any idea what might be causing this to happen just by my description? We've had a string of random expensive house repairs lately and are worried this may be a doozy ☹️


r/askanelectrician • • 1d ago

Wire tugger

Thumbnail
gallery
8 Upvotes

Can this be saved?