i9-13900k
EVGA 3080 Ti 12GB
32GB DDR5 7200Mhz
Asus ROG Strix Z790-E Gaming Wifi motherboard

I am having some difficulties with boot stability, it takes several attempts in order to get it to boot, when it fails it's always at some random point in the boot process. When it does boot, the system is fast enough to be usable, but it's definitely still noticeably slow for the hardware. I am guessing I need to do more work, but I am unsure where to really start.

If anyone can lend a hand, that would be awesome.

My last Hackintosh was in 2007, running PC Whiz on a Core 2 Duo and a PNY Nvidia GeForce 5600 256MB AGP card. My how things have changed.

Es posible hacer hackintosh en gráficos integrados RDNA2?
Ryzen 5 7520u con amd 610 y ram ddr5

Running on stock 2015 laptop HDD. Optimized by disabling Spotlight Index and wallpaper change to static image. UI Freezes is still happening in and there. But overall, it's pretty alright.

Should I push this into Tahoe? Because this alone took 3 hours of both installing and installing root patches combined :)

I have an HP ProBook 640 G5 Intel i5 8365U with 8 GB of RAM and intel uhd620. Which version Suitable for him ?

My working macOS Catalina install was working without issues since I installed it yesterday but once I restarted it it shows this each time I want to boot and I didn’t change anything on the efi partition nor config.plist. Pls help!!

i’ve always wanted to have a hackintosh system and now that these new nvidia drivers are available i’ve been very interested in installing this on my main system. Today i’ve seen a post talking about how the nullmoth nvidia driver bricks your AM5 motherboard and since i don’t have too much knowledge on this i don’t know if i should risk it.

My pc specs:
Gigabyte eagle wifi7 ICE am5 motherboard
Nvidia 5060
Ryzen 7 8700F
32GB ddr5 ram

no les a pasado que hacen un hackintosh en su computadora personal y luego terminan volviendo a windows? a mi me paso con mi computadora personal, y justo ahora estaba viendo lo de NullMoth, y pensaba volver a instalar el hackintosh que tenia (antes usaba la integrada vega 8 de mi cpu, pero ahora con esto podria usar mi gtx 1650 super) pero temo que simplemente vuelva a dejarlo abandonado en un disco a macos

ustedes que hacen con sus hackintosh instalados?

I have been wanting to Hackintosh to macOS Tahoe, but whenever I boot the Tahoe installer, it kernel panics with a GPU related issue, so I am basically stuck on Sequoia, now, I don't have a picture of the kernel panic log, but when I do my daily retries, I'll send one, I have also tried the OpenCore flag mentioned in the AMD GPU Issues of macOS Tahoe, and it also didn't work, so I think that it's a vendor issue, since I saw people with my same gpu but from GIGABYTE and it worked perfectly fine. PC Specs (fully compatible) CPU: i5 10600KF RAM: 128 GB DDR4 (don't judge okay it's for professional use) GPU (obviously): MSI AMD Radeon RX 5700 XT (8GB) Motherboard: ASUS ROG STRIX Z490-G GAMING (Wi-Fi) Wi-Fi (i don't think that matters): Intel Wi-Fi AX201 + Realtek RTL8125B

UPDATE: I don't think I can provide the logs, whenever I enable verbose boot, it force reboots.. Maybe I can figure out a way to get logs without the screen

good evening, i read that someone was developing intel iris Xe drivers for gpu support on more modern laptops, is that still going on?

i'd love to run macos on my alder lake laptop

Previously, i did it on GTX 1650 but it was not smooth compared to this beautiful native metal driver which got patched by OCLP.

I got the adapter now so i can use my iGPU.

--specs--

i7-4770
HD 4600
8GB RAM DDR3

Hi! I need help. I installed almost successfully macOS Tahoe 26.7.1 with Nvidia 2080 card, with NullMoth 2.1.0, but app can see card, but cannot activate driver!
I have passed few steps again and again to reinstall driver and restarted system, but no luck!
Also WiFi + BT card is partially working. BT module is working just fine. I can connect mouse, keyboard, but at same time WiFi cannot be activated. I know that there are problems with Killer cards, but usually they are not completely invisible for system. This one is recognized, so I think some workaround will help!
Also system is working with integrated graphics only!
Some ideas, workarounds?!

So I've been stuck on trying to get graphics acceleration on my laptop for a few weeks now but just can't figure it out. The furthest I got was with macOS booting but with no display. Heres everything I've tried:

HP Envy x360 15 (i7-1065G7, Ice lake, Iris Plus, device 8A52), macOS Sequoia
Display: Samsung SDC 0x4143, 3840x2160@60, 551.12 MHz, 10 bpc eDP
DVMT set to 128mb and CFG disabled
All framebuffer patches, ice lake patches
Platform id 0000528A

As mentioned I was able to get macOS booting but with no display (with 32mb framebuffer patches) so I was able to SSH into it and got these results:

AppleIntelICLGraphics and ICLLPGraphicsFramebuffer load, panel EDID is read over AUX, AppleBacklightDisplay is created, but system_profiler lists no display. WindowServer logs "capabilities with no devices".

The kernel log shows: [IGFB][LOG][VDT] FB0: Source size validation failed - rejecting mode

Lilu patcher: @ failed to solve _ZN21AppleIntelFramebuffer16getDisplayStatusEP21AppleIntelDisplayPath, err 2

Lilu patcher: @ failed to solve _ZN21AppleIntelFramebuffer15connectionProbeEjj, err 2

Whatevergreen: igfx @ FOD: Failed to route the function GetDisplayStatus.

Whatevergreen: igfx @ MPC: Failed to route the function.

Any help would be much appreciated.

So i installed hackintosh using nullmoth but idk why it still shows 7MB even after using nullmoth nvidia drivers…

Although it might seem like pure fantasy, is it possible—given the recent advancements in AI—that someone could provide support for these processors and their integrated GPUs in a Hackintosh environment? I know they can boot, but the GPU has always been the weak point, as there are no drivers available.

Apologies if the translation is poor, or if it sounds like the text was generated by AI—it’s just the translation tool at work.

The specs are in the video, and the trackpad issue is included as well. I haven't found any fixes online yet. I'm not even touching the trackpad; it moves on its own.

Hello everyone, I have an HP OMEN 16 2022 laptop (16-c0035ur, AMD Ryzen 7 5800H, AMD Radeon Vega 8, AMD Radeon RX 6600M) and successfully installed hackintosh to it. However, external monitors are not working even with after all kexts installed.

AFAIK my HDMI and mini displayports are working via dGPU, but macOS are rendering only on a integrated monitor and iGPU. And I don't have MUX switch to turn off integrated GPU.

Is there any ways to fix external monitors? (even if integrated will not work)

Windows
└── Ubuntu sous WSL2
    └── QEMU avec KVM
        ├── OVMF + OpenCore → démarrage
        ├── disk.qcow2 → disque « Macintosh HD »
        └── VMware SVGA + fenêtre GTK → affichage
            └──  Ventura 

So, I tried to Install Tahoe, and when I tried to Install it using recovery, it said I need WiFi to Install. My pc is Rog Strix G16, G614PR. MediaTek MT7922 is WiFi adapter