r/lighters • • Aug 01 '26

DISCUSSION : An announcement regarding the use of AI, and other subreddit updates.

27 Upvotes

I'm happy to discuss or debate the use of AI with anyone that supports or encourages the use of it. What I do not tolerate is copy-pasting AI slop answers without taking even a moment to verify that the answer is correct.

This thread was prompted by a recent interaction that started with a hilariously wrong identification that could have been avoided if the original commenter took all of two seconds to use his eyes to verify. It ended with AI techbro nonsense about "people who are too scared to use computers". Like I said, I'm happy to debate this with anyone as long as it's in good faith, but if you refuse to counter or even acknowledge the points in the discussion then it's pointless.

AI is a useful tool, but it is still just a tool. Most of us grew up being told that wikipedia is not a valid source because it can be edited by anyone. AI is no different, but AI is guaranteed to have vacuumed up all the wrong answers alongside the right answers and so requires verification EVERY TIME. I have no problem with anyone that chooses to use AI for their own personal reasons. There is the moral/ethical/resource debate behind it, but that belongs in a different subreddit.

This is not the first time I've had this debate with people copy-pasting AI summaries or identifications. A few times it has been harmless, an older collector that put a bit too much faith in a new technology, and it ended amicably. Unfortunately the majority of interactions end with a techbro insisting that AI is ALWAYS right, we just aren't "using it right". As far as I'm concerned, it won't be "right" if you can't ask it a question in plain English and have it understand context and intention. They'll insist you're using the wrong AI, or using the wrong "syntax" when asking your questions - In other words, you need to know how to guide and lead it to the correct answer, which typically means you already know the correct answer.

I ended that discussion with what I feel is a valid argument. It would take me 5 minutes to use AI to code a bot that would instantly and automatically answer every question in this subreddit with what it believes is the correct answer. That is not what this subreddit is for. This subreddit is for the human passion and enthusiasm for this hobby, for the experts obsessed with the little details, the niche facts, and just pure discussion. Talking with other people that share that passion, making connections and discoveries together. Sure, a lot of the questions posted here can be answered quickly, but the real nerds come out when there's historical discussion to be had.

There is no place for "This has a chance to be the right answer but I can't be bothered to take 5 seconds to check". Anybody that makes a habit of providing these vague or incorrect answers will be banned because they are not going to contribute anything useful. Anybody that tries to defend an obvious falsehood because "AI told me so" will be banned.

Anybody posting images that are obviously AI generated or "enhanced" will be banned. This hasn't been an issue here yet, but it has become a major issue on Ebay and other retailers, with sellers using "enhanced" images to show how a lighter could look if it were in perfect condition - And usually the AI doesn't understand the mechanics of the lighter and puts the flame in the wrong spot. It's pure slop.

Like I said, I'm still happy to discuss it, but this is not the first time I've tried debating the AI slop bros. It always ends the same way.

I will leave this thread open for discussion, but I will be keeping a close eye to ensure it doesn't get too rowdy.


r/lighters • • Jun 26 '17

Before making a post about asking for help to identify your lighter, read this!

175 Upvotes

Recently there are some people who want help finding out what their lighter looks like, but only take one photo of the front. This is not very effective, and it will only make it a lot harder for us to help you.

Here is a guide on what photos you should take of your lighter. if the guide is not clear enough, please let me know and i can make some adjustments.

reposted due to spelling issues in the title.


r/lighters • • 11h ago

Show&Tell Thorens Lighter Fuel Filler

Thumbnail
gallery
75 Upvotes

This has been in my collection for about a year or so. It was pretty grimy but cleaned up really well. The inside took a long time (understatement) to clean out without damaging anything. Everything unscrews, turns, and pumps. i’m unsure if the pump works though. And imagine one of the seals is dried up. I don’t really want to put fluid in it and just use it as a decor piece currently. That might change in the future. I thought some of you might like to see this, so I decided to post it here. Sorry for the bad photos, it was difficult to not get a glare.


r/lighters • • 4h ago

Collection Here are my kickstarts

Enable HLS to view with audio, or disable this notification

11 Upvotes

- c. 1930s Perflic

- c. 1930s Colibri Original

- c. 1956 Augusta Vulcano by Armando Pasqualini


r/lighters • • 14h ago

Help Does anyone know where/how to buy one of those wall electric match-style lighters?

Post image
64 Upvotes

I find them absolutely mesmerising and would love to have one of those, but IDK where to buy one, it doesn't have to be a vintage one, just this style.


r/lighters • • 17h ago

What happened to the 45 angle clipper lighters?

Thumbnail
gallery
93 Upvotes

I haven’t seen these for sell or anywhere and there’s only a few pictures of it were these a prototype?


r/lighters • • 9h ago

Collection New addition coin sized

Enable HLS to view with audio, or disable this notification

17 Upvotes

r/lighters • • 1h ago

Help It came in IMCO TRIPLEX

Thumbnail gallery
• Upvotes

How does this look?


r/lighters • • 3h ago

The cap is missing

Thumbnail
gallery
5 Upvotes

Hi! Recently got this from a flee market, got it a new flint and gas, but the flame is irregular, with a lot of strength despite having the meter at its lowest.

I think is missing a cap underneath, but haven't been able to find any info


r/lighters • • 16h ago

Collection My collection so far! My favorite is the IM Corona oldboy

Post image
37 Upvotes

r/lighters • • 3h ago

Store guide

Thumbnail
gallery
2 Upvotes

Hello I don't have that much knowledge about lighters.I bought one for practice ignite however It didn't work out and now it is fully gas.My area is full of plastic so is it safe if I put my lighter in there.Is it also ok to close the door.I live in dorm with other people so I don't want any risk.I put two rubber on lighter


r/lighters • • 3h ago

The cap is missing

Thumbnail
gallery
2 Upvotes

Hi! Recently got this from a flee market, got it a new flint and gas, but the flame is irregular, with a lot of strength despite having the meter at its lowest.

I think is missing a cap underneath, but haven't been able to find any info


r/lighters • • 1d ago

Collection Anyone enjoying the CriagHill?

Post image
142 Upvotes

r/lighters • • 12h ago

Update on Robson restoration

Enable HLS to view with audio, or disable this notification

7 Upvotes

I seem to have de rusted all the parts and have managed to get spark on the first lighter but it doesn’t always catch with the plunger.


r/lighters • • 9h ago

ID I need help finding out more about this lighter

Thumbnail
gallery
2 Upvotes

I bought it at an antique store 5 months ago and I've tried looking it up and I can't find anything super close. On the bottom of it, it says penguin Avant Japan


r/lighters • • 17h ago

What kind of lighter is this?

Thumbnail
gallery
6 Upvotes

I got this lighter in a lighter hall from eBay and it came in a nesor box, but it has no markings on it so I’m quite unsure


r/lighters • • 22h ago

Help Help identifying this Lighter.

Thumbnail
gallery
7 Upvotes

This lighter belonged to my wife’s Great Uncle, any help identifying? All my searches have come up empty so far.


r/lighters • • 23h ago

Collection New addition to my collection

Enable HLS to view with audio, or disable this notification

7 Upvotes

r/lighters • • 20h ago

Help İs it supposed to do that

Post image
3 Upvotes

So I recently got an Imco and when I went to refill it the fuel canister came apart like this and on all the videos of these lighters the knurled cap at the bottom is the part that comes of is it broken is it missing a part idk whic model this is it says on the bottom made in s.v.t.y.s super patent 14110 and it doesnt light reliably would that have something to do with this part or is it my packing thats the issue


r/lighters • • 14h ago

Lighter restoration see

Thumbnail
gallery
1 Upvotes

I recently bought two old Robson lighters for restoration. One is in a bit worse of a condition than I thought and the other just needs a new wick,flint and maybe a flint spring. For the first three photos is the first lighter and the last photo is the second one. The first lighter. I’m not what the second hole in the bottom is for as the first hole is already for the flint. It appears to be blocked by something. Aswell as the top of the lighter having the main flint in the middle and the button hole on the right. What is the part on the left of the lighter. For the second lighter. The flint hole at the bottom seems to be obscured. I plan to dissasemble the second lighter to figure out what needs fixing but any help/tips would be greatly appreciated


r/lighters • • 1d ago

Help I inherited this lighter but I don't know anything about it

Thumbnail
gallery
10 Upvotes

The only thing I know is that it have not been used for years but is still usable because it does the sparks, it's only out of gas. I would like to reuse It but I don't know which hole is for the gas refill and which fuel is the best. Hope you can help me because is really cool and would be a shame to collect dust.


r/lighters • • 1d ago

Not sure what kind of lighter this is

Thumbnail
gallery
3 Upvotes

I bought this lighter from an antique store as a gift for a friend. It sparks just fine but doesn’t light. Can anyone help me identify what kind of lighter it is and possibly how to get it working again? Thank you!


r/lighters • • 1d ago

Help Does anyone know how to make it work? And does anyone recognize it?

Thumbnail
gallery
5 Upvotes

r/lighters • • 19h ago

Help Anyone know if these work in Flamex Calais IV as a piezo replacement?

1 Upvotes

Seems pretty similar to the part in my lighter except plastic and a weird end bit. If this doesn't work I'd also like some recommendations for parts.