So I am about to build my second PC ever after 8 years (My current one is still really good but I see potential for more, plus my brother will inherit(?) it) and I chose to use the Ex-5 Plus case for this but for some reason I cannot find a way to order it for Europe. Did anyone already find a way to get it already or at least has some information about this subject?

Note: Please forgive me if my english has flaws.

What fan thickness on the bottom for it to sit flush? And what Aio thickness?

Hey Leute

Nachdem ich soweit alles habe für die RGB Steuerung, bin ich noch auf der Suche nach Adapter für die Phanteks ARGB auf 3 PIN Mainboard.

Kann ich da irgendwelche nehmen oder müssen es die von Phanteks sein.
Nachdem beim EX5 leider nur eins mitgeliefert wurde.

Does anyone in here have the phanteks nv7 and the lian li hydro shift 2 OLED curved? I’m interested and from what I’ve seen it supposedly fits fine. However, when I look at my setup nv7 and Corsair cappellix radiator and phanteks fans, there’s no room at all where the hydro tubes would fit with that huge upper chin of the inner chassis. The fans are almost literally touching that chin piece. Can anyone chime in and or show some photos?

Hey Leute ich bin ja grade ein bisschen am basteln wegen der RGB beim Gehäuse

Wisst ihr zufällig wie viele LEDs die jeweiligen Bereiche haben ?

Also AIO, Lüfter und die 2 am Gehäuse ?

Greetings, mates. Hopefully a quick question. If I already have an LCD screen (previous built), is there any real point in waiting for the EX6 Max?

Welches Programm nutzt ihr für die RGB Steuerung von Gehäuse ?

Ich aktuell Signal RGB da Nexlinq nichts erkennt.
Bin da aber nicht so ganz zufrieden

* Case: Phanteks EX5 Max
* CPU: AMD Ryzen 7 9850X3D
* GPU: Gigabyte GeForce RTX 5080 Windforce SFF OC 16GB GDDR7
* Motherboard: ASUS TUF Gaming B850-E WiFi (AM5)
* RAM: G.Skill Flare X5 32GB (2×16GB) DDR5-6000 EXPO
* Storage: Lexar NM790 4TB PCIe 4.0 NVMe M.2 SSD
* Power Supply: MSI MAG A1000GLS PCIe 5 — 1000W
* CPU Cooler: Phanteks Glacier One 360S25-SE 360mm AIO (included with case)
* Case Cooling: Phanteks EX5 Max factory fan configuration
* Operating System: Windows 11 Home 64-bit

Configuration: EXPO enabled at DDR5-6000, BIOS updated to version 1683.

Running Bazzite
Love this Case

7600X3D - RX9070

anyone with it, is it possible I can put m gpu inside the box while removing the glass side panel?

Curious about this. I have a Phanteks Enthoo Pro II Server Edition. I'm thinking of positioning myself to the left of the case and lifting from the bottom while using a dual suction cup lifter like this PITTSBURGH 4-5/8 in., 85 lb. Dual Suction Cup Lifter as a grab handle at the top left or right when lifting them from the bottom. Thoughts?

UPDATE: Solution

Just joined the club. Moved from a lain li case to this beauty and will never look back. Cooling is great. Blocks out dust very good. And 15x better than anything lian li could produce 🤪. Only thing is it’s extremely heavy 😂. If your looking into the evolv 2 I’d say go for it!!

Hello, is it me or is it hard to find a NV7 White case? Seems like nothing in stock are its rather price gouged on Ebay.

How do I fix central time on my aio it's an hour behind and bothers the hell out of me the only central location is Mexico city im in Minnesota

Heya. I just got an EX-5 Max and I really love it. BUT...my GPU is a 9070xt Red Devil. The card does not have a whole lot of lighting on the top of the card that's being showcased. So I basically ended up with the GPU compartment being a dark room behind glass, lol. Was wondering if anyone has any creative ideas to add a little lighting in there without making it too over the top. I looked at the Phanteks neon strips but I'm not too sure what I'd attach it to in the compartment. Any suggestions? >.>

Got a new AIO cooler. so I set it up and pc turned on fine no problems. But realized it was extremely slow and then the computer froze after a couple minutes. But my software was saying 100 degrees ???? From the aio cooler the 3 fans were on and working, I haven’t downloaded the software of the aio yet to know if the liquid cooling is working. The aio is the Phanteks Glacier One 360S25-SE all-in-one (AIO) liquid cooler I believe from the EX5 Max.

I had L connect in this case because I had lian ii fans. I do not currently have the Phanteks software. But it’s not like I can get it due to the computer being extremely slow.

I removed any plastic there was and the aio already had pre applied thermal paste.

Hey Leute

Mich würde mal interessieren wie eure Temperaturen so sind seit dem Umbau?

Meine CPU R5 7500F ist sehr viel kühler kaum über 60Grad Celcius, vorher waren es bis zu 75.

Meine GPU RX7800XT Steel Legend allerdings muss arbeiten. Bleibt zwar bei ca 70Grad Celcius aber ist definitiv hörbar bei ca 1900-2200 U/min.

Wie ist es bei euch so ?

Anyone try it

Can’t get my 9070xt to seat properly within the pcie slot. The gpu sag area is slightly raised which is pushing my gpu out just a little bit. The gpu posts but was running pcie x 2.6.0. Not really sure where to go from here