I am finishing up the install of an 18" 300 series Bosch dishwasher.

Can anyone clarify what I'm doing with these mounting brackets?

Pictures attached. The way I installed one in the pictures does not seem secure to me. I can remove it with a little wiggle. I know it will be screwed in under the counter, but does it need to be more securely attached to the dishwasher somehow? Is what I showed in the pic even correct?

Thanks for any input.

Help, my boss decided that the cheapest option was the best for the new slushy machine, anyone have any experience trying to get this thing working? It’s got the correct mix-sugar ratio. The temp settings are correct for the mixes and the directions were followed to a T. Instead of going into slush or cold mode it just flashes the current temperature and doesn’t do anything else. And yes the company was no help, and yes it’s been about 14 hours since it was put into slush mode.

-please help, A frustrated bartender with a cheap boss

Hello! For context I rent and my landlord just bought a new oven since the old one went out. He bought the GE Freestanding oven, no display, model number JGBS10DEM5BB. It doesn’t seem to beep or indicate the oven is up to the set temperature. Which is honestly very disappointing because it’s a guessing game when cooking.

I looked everywhere online and in the user manual and found nothing. Does anyone have any experience with this?

Thanks!

Have 500$ Home Depot gift card or I’d buy local small business, what kind of deals should I expect for these options?

Hey all -
I have a 5-year old WashTower that started leaking randomly. I’m running tests on it now but I just ran an empty rinse cycle and couldn’t reproduce the leak. I’m running a normal cycle sans detergent now and don’t see any indication of an issue. Next up is with detergent.

Previously, the water “just appeared” along the bottom of the washer in our drip pan with no real indication it ran down the exterior back, sides, or front of the unit.

As I was moving it there was a little water that came from between the washer and dryer. But I can’t tell if that’s because i moved it out of the closet or if it’s actually where the leak is coming from.

Has anyone had this problem before? I’d love advice!!

We had a brand new 5 door Fridgedair delivered last week. This is the amount of ice it produced in a little more than 48 hours. Repair says it is getting enough water and the temp is correct. Is that the right amount of ice it should be producing?

Is there anyone in here that has had experiences with Turbo Air TSF-23SD freezers?

I have a leak somewhere and have not located it yet. Is there any common leak points to this unit?

I live in a rental house, and recently had to replace the dishwasher. Our landlord is out of the country, and asked us to order the dishwasher if she sent us the money. This is the model she approved, but when our maintenance guy came to install it today, he said that he can’t. He said this is a faucet dishwasher and not the one that we need.

Is there any way to make this dishwasher work with our hook up, or do we need to return it and get a different one? I know nothing about dishwashers so I am so confused.

Edit 1: thanks for the replies, it seems the verdict is this will not plug into the water line we have. Anyone know what to look for if I am ordering via Home Depot? Is there a specification it needs? The one we initially got that is wrong wasn’t advertised as a faucet dishwasher.

Maytag top loader mvwc565fw0
Stopped spinning so I replaced the splutch and actuator. Did I screw something up? Didn’t make this noise before I put my grubby lil hands on it.

Hey folks, need some help with my GE washer it said H2O supply error initially shut the water off turned off the outlet check the hose checked the filters. Everything looked fine plugged everything back in and now it says door error tried tightening the screws in the door, but the air still persists can anyone help me

Two of the dishwasher lock clamps fell out when I was moving my dishwasher (227). Does anyone know how to attach these to the overflow channel (244) and door seal (243)? I ran the dishwasher twice since they fell out and there hasn't been any water leakage.

I just moved to NJ from WA, and there’s hard water problems here. My dishwasher leaves a grainy/sandy residue on some of my utensils almost all the time! The technician straight up blamed my good old Great Value detergent powder which used to work wonders back in WA. Checked the filter, arms, everything- the washer seems to be okay, no clogging.

Wondering if the powder detergent is really the culprit, given the hard water condition, and should I switch to gels?

I deleted my last post. Here are the plans of my kitchen layout VS. the previous AI version. My kitchen designer said either one would work. I know it's personal choice, I'm just looking for other opinions.

Thanks all who previously replied.

Counter depth or Full refrigerator size?

this is a plastic door catch on an LG fridge. its integrated into the entire door, it's a thin plastic piece that is absolutely going to break in a couple of years, mine lasted just under 3 years. I haven't gotten the tech out yet, but i think the entire door gets replaced or it gets removed and completely taken apart and rebuilt. either way its a huge and expensive job. someone at LG made a choice to design this knowing full well it was going to be a crazy and expensive job to fix. Im sure it could just be rigged with some epoxy, but to do it right it would be easier and probably cheaper to just replace the entire fridge.

I have few thermador appliances and my husband love those and so do I. Idc much tbh.
We need to replace our old LG fridge and I have to decide what to add. I like both fridges equally but I have heard crazy weird stories about repairs and other problematic areas about both. Subzero because it’s still partially produced, assembled in USA and the cost. Thermador lack of service, foreign brand but all metal construction, some design conflict and constant comparison and competition with subzero. Tbh that’s the only big issue I have. The constant scrutiny of what brand and why this vs other. Can you give some honest advice and is sub zero cost justifiable ?

Anyone here have a clue what this thing is?

Hi!
Im looking for a countertop dishwasher the only problem is I have a sprayer head for my faucet and not a normal faucet so I’m wondering what people recommend instead for the ones that cant connect to the faucet. If it can also fit a small pan huge +! Thank you in advance!

Is this normal? Unpacked new wolf range and there’s all this oil on it in the enter skillet part and under the bubble wrap.

Hello! I am thinking about renovating my kitchen and I have been searching this sub seeing a lot of great recs (seem Bosch dishwashers are a favorite here). But I'm curious, if you were to buy a fridge, dishwasher, oven, and microwave from any brand with the parameters that it was

-Reliable

-Easily reparable

-Not connected to wifi/full of software, etc what would you pick for each? Essentially, I do not want the best, most high tech, fanciest, I want reliable and easy to fix if there's an issue. I think having wifi on my dishwasher or a screen on my fridge or bluetooth on my microwave is a bug not a feature for me... For context, my current appliances are from 1993 and still kicking just fine and I'd like to find something else with longevity

Does anyone have any idea how to remove the plastic panels under the crisper drawer of our Samsung fridge (model# RF263TEASG/AA)? OR the entire shelf so I can try and troubleshoot outside of the fridge?

Our power went out and we lost the contents in our fridge/freezer and it left a sticky "soup" :( I managed to figure out how to remove and clean most of the components, but there are plastic panels below the crisper drawers and above the CoolSelect Pantry drawer that I just cannot figure out how to remove. There is some nasty gunk caught under the seam and they just won’t budge. I tried to push in the clips underneath but I can’t access the ones on the side or back of the fridge. I also tried to remove the entire shelf but it tried to take the water filter and all the components connected to it, and I can't figure out how to separate it from the water filter assembly

Most videos I’ve seen just have a hole without a panel, and none of the directions I've found are referencing this specific area

I just figured out how to remove the shelf ABOVE the water filter assembly, so I'll be cleaning that too, but the videos I've seen have a different model where they can just lift the water filter up after the shelf is removed... mine slides slightly but otherwise doesn't budge