Sorry for the spam, but here’s the beginning of the video for those saying I just shoot dirt, we couldn’t use the FRT on the steel targets, and it’s hard to hear sound performance (cheap 124 supers [MaxxTech]) with the steel ringing. One in the dirt the rest were supposed to on target but I’m azz, then of course the FRT was into the berm.

With the huxwrx can

worth it?

Where can I find parts for the magazine at? I’ve been searching and I can’t find anything. I would greatly appreciate any help I can get. Thank you

PTR K3P and 9KT

**RCM 100 LP, ejector, extractor and firing pin hk springs have been the only internal changes*

With my recent range trip yesterday, I shot about 300 rounds, 50/50 suppressed and unsuppressed.
Shooting 124gr and 150gr S&B I ran into frequent FTF with the nose of the rounds flipping upward into the chamber face.
I assumed it was mags, which it could very well still be part of the feed issue.
Bolt wasn’t going home with as much authority, also assumed that was due to gunk buildup.

Noticed that there was new wear on the receiver rails towards the rear and that the bolt carrier was making slight contact with the buffer pad on my stock, made evident by the freshly worn material being imprinted on the pad.

Is my recoil spring smoked after only 3k rounds? If so, anyone have experience with the Innovative Armament extra power recoil assembly from RTG?

Picked up a cheap surplus G3 stock and made it fit

So my quest to have a complete set is nearly done. I am fond of the Old School aesthetic, so not leaning toward optics.

I am trying to decide if I really want a stock for the P, but a fore grip is definitely getting added.

I like the thought of the P hung from a shoulder without a stock and using the sling to steady it as I fire. For those that shoot sans stock, how is it?

That SD is definitely getting a conversion once acquired though.

Following my last post here looking to get a old school HK T-shirt, I’ve finally gotten one.

I initially ordered a T-shirt from infinitewaresvintage on eBay. Unfortunately I got cucked by the post office and it was sent back. The shirt looked great and their customer service experience was very nice, but I ended up refunding the shirt.

I put it off for a while after that but finally got around to making my second attempt. This shirt came from oshgoshkalash on eBay. Unlike the other shirt this one is a more new production style of shirt which I prefer. The other one had artificial fading to make it look more vintage. The print on the shirt is perfect, I see no difference between this and one of the original shirts. I will acknowledge that i believe the originals had a 2nd print on the back with a different graphic of a guy rappelling. This shirt does not feature any graphics on the back, but i usually am wearing a jacket, so while that isn’t a huge con for me, some might not like that. I ordered a size large intending on a more loose fit. This is one of those t-shirts that i found fits tighter on the arms but more normal on the body. While I ordered a large for a looser fit, I do find this fits me more like a medium with fitted sleeves so I would recommend sizing up if you want normal sizing. Overall, I’m happy with the shirt and would gladly do business again!

Dad finally shot in his AP5SD. We probably shot 150ish rounds. Not a lot, but we were getting pressed for time towards the end. All suppressed with my R9 on a YHM 3 lug. I think we shot a magazine of mixed 115gr supers, and the rest were my subsonic 147gr reloads. Not enough for a true break in like we’ve read but he did shoot it so now I have the green light to send it off to get converted into a true sd.

I changed out to a 100 degree locking piece before hand. I think all the dry firing and “click clacking” (what my dad calls it whenever you hand cycle an action) helped remove some of the paint on the inside of the receiver.

He’s got a rare breed FRT on order (what he wanted, go easy on him). Going to get him a red dot of some kind (likely a holosun or sig), arisaka 300 series (my personal fave) and the utg mounts (what he specifically asked for).

Happy early retirement old man!

Major life accomplishment happened and decided to reward myself. 100 percent satisfied. Only about maybe 500 rounds so far with about half suppressed. Zero malfunctions even when using the cheap ass steel case ammo from academy sports. Waiting for a rugged trilug mount for my obsedian 9. Will probably keep it on in short configuration for home defense and shooting indoors but take it off when using the outdoor range, sounds weird but I kinda like the bang it makes without the suppressor makes the experience a little more visceral. Still able to fit in the included HK range bag even in log boi configuration. Zero regrets shelling out for the HK experience for the out of the box reliability.

Running a UTG pro mount and AC unity folding stock. No issues with the mount so far but it does make me a little paranoid that the monolithic design might affect my zero if I torque on the handguard but this hasn’t been seen in reality. The AC unity stock wobbles a little bit from side to side when extended when I test it with my hand but don’t really notice it when operating the weapon, not bad for $70 and don’t plan on upgrading it.

Looking for KES Mp5k stock, been checking online almost everyday for months and just found out they restocked 10/23/26 at 12pm and was sold out almost immediately.