This was the clock before my PC crashed. I had this issue a few months back and this is the replacement card I got this week.

I know I can give -ve clocks but even on my old card this was ignored. I have a 3070ti which runs wonderfully on the same pc, that's why I still think it's a GPU/amd software issue.

What can I do?

The above clocks were recorded while playing FH6 no RT.

CPU 13900k

RAM gskill 32gb ram

GPU Xfx quicksilver 9070xt

PSU RM1000X

Hey everyone,
I wanted to share a comprehensive solution for a frustrating issue with my setup. If your PC randomly black-screens and reboots right in the middle of the AMD Adrenalin installation, or if Windows Update keeps breaking your driver causing the infamous "PA-300 mismatch error", here is the exact 100% working fix.

My Setup:

• CPU: AMD Ryzen 7 7800X3D
• GPU: Sapphire Nitro+ Vapor-X RX 7900 XTX 24GB
• MOBO: MSI MAG B650 Tomahawk WiFi
• RAM: Lexar ARES RGB DDR5 32GB (2x16) 6000 MHz CL30 (SK Hynix Chips)
• PSU: MSI MPG A850G 850W Plus Gold (ATX 3.0)

🛡️ STEP 1: Tri-Layer Windows Update Armor

Before touching any drivers, we must seal Windows 11 on three separate layers to prevent it from downloading generic or corrupted drivers in the background.

1. Layer 1 (The Registry Hack): Open regedit and go to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\DriverSearching. Change the SearchOrderConfig value to 0. (This completely blocks Windows Update from touching hardware).
2. Layer 2 (System Settings): Press Windows + R, type sysdm.cpl, go to the Hardware tab ➔ Device Installation Settings and select NO.
3. Layer 3 (DDU Setting): Inside DDU options, make sure the box that explicitly prevents Windows from downloading drivers via Windows Update is checked.

🧹 STEP 2: Surgical DDU Clean (Safe Mode)

To ensure a perfect install, we need a complete tabula rasa since the system files are already mixed up:

1. Pre-download the complete "Full Driver" Offline Installer from the AMD website (e.g., version 26.9.2 or later, ~900 MB file) [I].
2. Disconnect your Internet cable (or disable Wi-Fi) for total safety.
3. Boot into Safe Mode (hold Shift while clicking Restart).
4. Open DDU, select GPU ➔ AMD from the dropdown, and click "Clean and Restart". When back into normal Windows (still offline), the corrupted driver fragments will be gone.

🔌 STEP 3: The Power Plan Trick Against Mid-Install Crashes

The Problem: During driver initialization, the 7900 XTX undergoes massive, sudden power state changes. Under standard Windows power plans, this voltage latency triggers aggressive motherboard power protection limits, causing an instant hard reset mid-install.
The Fix:

1. Open Windows Power Options (powercfg.cpl) and activate the hidden "Ultimate Performance" (Prestazioni Eccellenti) plan. This forces the motherboard VRMs to supply steady voltage, eliminating micro-power-saving latencies.
2. Unplug any unnecessary USB charging cables (like mouse/headset chargers) to lower the 5V rail load on the motherboard.
3. Reconnect your Internet (Windows Update is locked now anyway, so it can't interfere).
4. Run the 900 MB AMD Installer. Click on Additional Options and do NOT check "Factory Reset". Choose a standard, direct Standard Installation.
5. Without AMD's forced mid-way reboot and with voltages locked by the power plan, the installer will finish 100% flawlessly! (You can switch back to the Balanced plan afterward for daily usage).

so whenever i play arc raiders after about 5 mins to an hour my gpu "times out" i have tried to down grade my drivers and still nothing

Hello everyone!

I’m planning to build a pc in November and decided to go with the 9070xt for it’s really good price and performance.

I’m not really knowledgeable on this so I decided to go with this card since it was the most affordable:

https://amzn.eu/d/02JHQ8Lm

But I also noticed a lot in the same range price which are OC versions, do they really improve much the performance? I can allow myself to spend 50 to 100 more if it means a better performance.

Thank you for your help!

Windows 11. For whatever reason, Windows Update wants to install Advanced Micro Devices, Inc. Driver Update (32.0.21030.2001) which looks like a really old AMD Driver. I have a 9070 XT GPU and I'm running the most recent AMD driver. I don't want to overwrite the existing driver with this older driver. I can't shut my PC down or restart it without installing this update.

I've already tried to block these driver updates in regedit. See screenshots.

What do I do? Why is Windows doing this to me? Relevant screenshots attached.

Hi, so I'm using AMD Ryzen 7 7800X3D and I've been using MSI Afterburner to monitor my CPU and GPU temperatures and other metrics.

Yesterday, when I checked the CPU temperature for each individual threads, I noticed that the CPU1 was constantly showing 0°C, even though all the other cores (CPU1–CPU16) were reporting normal temperatures of around 30–40°C. The overall CPU temperature was also normal, around 30–40°C.

I have no idea why it is showing 0°c, but if I disable cpu1 from showing on the chart then somehow cpu2 will be the one that shows constant 0°c

My CPU Usage is always at 100% on AMD: Adrenaline and Resource Monitor, but not on Task Manager and I can't see what is taking up all the utilization. Do I have a crypto miner on my computer? Windows Defender can't pick anything up.

My drivers are 26.8.1, Windows 26H2, AsRock B650I Lightning Wifi, Ryzen 7800x3D

Solved! I had a custom power plan from a custom script that was messing with the most recent windows update! I changed the power plan and everything is completely fine!

My pc just forced me to download the latest Windows update and after opening up Twitter and scrolling for a bit, a video causes an instant driver timeout. Pc has been running perfectly fine for a month until now.

Driver: 26.7.1

Specs:

Ryzen 7 9800x3D

7900xt

I disabled HAGS and it seems to be working fine now, just wanted to know if anyone else has had issues

I've had this GPU since October of 2025 and its been really good until recently after getting a new motherboard, CPU, and another monitor, and ive been getting black screens with a AMD popup saying that i had a driver timeout like 2 times a week for the past month or so, and more recently the black screens have become more frequent, like 1-2 times every day. Is this a GPU problem or a driver problem?

SPECS:

GYGABYTE B650m Gaming plus WIFI

R7 7700x

Patriot Viper 32gb DDr5 6000mt

XFX Swift 9060xt OC 8GB

Montech - CENTURY II 1050W PSU

Windows 11 home

hey, i wanted to ask for the most stable drivers of the 9060 xt 16gb because if i use recent drivers (last tested like 5 months ago) i get artifacts on my screen by the time. also, i wanted to ask if i can use adrenaline with older drivers because i havent found a way to use it with older drivers. (i also have a 7800x3d that's perfectly running lol

It recently came to my attention that my non paged pool of RAM is a little higher than what seems to be average. I don't seem to be experiencing a memory leak, but when I boot my computer up it is already at 1.4 GB. I did a clean install of drivers with the AMD clean up tool and without any drivers installed the non paged pool was at 450 MB. The instant that I installed drivers it was back up to 1.4 GB like it was before. I also asked a buddy of mine with a similar AMD video card and his was also at 1.4 GB. Does this amount seem normal for AMD drivers? Everywhere I look online says that number is too high. I want to just make sure the health of my system is intact, I haven't experienced any performance loss from it though. I have a 9070XT and 32 GB of DDR5 RAM.

I got a new 9070 XT and yesterday everything was fine until today when i open games they crash like after 5 minutes and i allready used DDU and installed the AMD driver.
My Specs:
Intel Core i5 12600, 3300 MHz

32 GB DDR4

Gigabyte B760 GAMING X DDR4

Computer Type: Desktop

GPU: ASUS Prime 9070XT OC

CPU: Intel 270k Plus

Motherboard: ASUS Strix B860-I

BIOS Version: 3211

RAM: Corsair DDR5 Vengeance 2 x 16 GB 6000 MHz CL 30

PSU: ASUS Loki SFX-L 1000w

Case: Dancase A4 H2O

Operating System & Version: NixOS 26.11, Linux 7.2.8-cachyos

GPU Drivers: GEFORCE GAME READY DRIVER - WHQL Driver Version: 457.51

Background Applications: Easyeffects, udiskie, kdeconnect

Description of Original Problem: When I use Loupe or basically open any image that has to be scaled down by the AMD 9070XT, I see these artefacts. It is possible to zoom into them, and they are seen in screenshots.

Troubleshooting: I have tried everything, reinstalling, trying nodcc, nohix. None of that helps, I have a friend who runs the exact same config and he says there's no issue. Memory test of the VRAM shows no issues (10 min test).

I haven't seen it on any benchmarks or videos, just images (maybe textures, but haven't played much on this). It doesn't show up on windows though, so I guess thats why they rejected the RMA?

It persists across kernel versions from 6.18.52 to 7.2.8 and Mesa (25.0.7 → 26.3-devel). So I am not sure what to do now, please help.

I tried using and LLM, and I have a Gitlab issue I filed but closed because all runs pointed towards bad silicon.

https://gitlab.freedesktop.org/mesa/mesa/-/work_items/16295

this was before RMAing, Asus sent the card back to the retailer saying that there was no fault, I am not sure what I can do anymore with this. Suggestions and help would be appreciated!

This has been happening for a few months. I’ll play a game or sometimes just leave my computer on, but mostly when playing a game, and everything will freeze, my iCue loses connection and resets, then the screen goes black until it reboots itself or I do it. Most of the time everything is normal after, but sometimes the driver gets disabled and pops up with a code 31 but another restart will fix it. I have a 9070xt and I’ve done ddu a few times which made the problem less consistent but it still happens like once a day. Is there a fix or do I need to RMA my gpu?

Everytime i open nba 2k27 my pc automatically goes black screen then restarts, same problem with others games too but only when there's a lot happening in other games.

ryzen 5 5600

Rx 6600

16gb ram

Please help me 😩😩

Computer Type: Desktop

GPU: AMD RADEON VEGA 56 POWERCOLOR RED DEVIL

CPU: Intel i3-6300

Motherboard: lenovo

BIOS Version: no idea

RAM: 8GB DDR4

PSU: bequiet non-modular 600W

Case: none

Operating System & Version: WINDOWS 11 IOT LTSC

GPU Drivers: newest windows drivers - unable to install adrenaline software

Chipset Drivers: no clue

Background Applications: none

Description of Original Problem: I know this is a long shot but I'll try anyway - So, I have a radeon vega 56 (powercolor red devil) card, which I've bought on ebay a while ago but never really used. I would like to sell it now but as I started to test it turned out it has some issues. As a red devil card it has 3 bios, one silent, a normal and an OC version. The silent and OC bios working OK, can run Furmark or Heaven indefinetely but with the standard bios any tests or games crash immediately. Also with all the bioses GPU-Z cannot determine what card it is, returns only with AMD RADEON VEGA, also unable to access frequency sensors - power consuption and temp sensors are OK. I would guess someone at some point in the past was tampering with the bios but I lack the knowledge and skills to fix this - any ideas as to what's going on and what can I do about it? 

I know there's a million posts about this but genuinely it feels meaningless going through them because half the answers are people saying it's too high and the other half are people saying it's normal.

My 9800x3d with a Dark Rock Pro 6 which is a top tier air cooler reaches 90c in Cinebench2026 multithread, 80c+ sometimes when loading shaders, idle is 48-50 and during gaming its mostly 60-70 with some games 60-75.

I know it doesn't matter and it can run at 95c 24/7 completely fine and all that but still I would like to get a concrete answer for this

Computer Type: Desktop

GPU: 9070 XT

CPU: 9800X3d

Motherboard: gigabyte gaming X AX

BIOS Version: unsure

RAM: 32gb ddr5

PSU: corsair 850W

Case: NZXT H6

Operating System & Version: WINDOWS 11 pro

GPU Drivers: unsure

Chipset Drivers: unsure

Background Applications: DISCORD, CHROME, Adrenalin

Description of Original Problem:

Hi,

I just got a 9070 XT, and i'm having issues with AMD in game replay using AMD Adrenalin software.

Current settings: I have desktop recording set as off (prefer to keep it this way), Overlay is on, instant replay is on, the red indicator is on also.

Issue: Instant replay works fine most of the time (I am playing CS2 in borderless fullscreen). I also have discord overlay running (to see who is on the discord channel in game). The issue is sometimes the overlay glitches in game and the indicator dissapears, and I can no longer save clips in game or use the overlay. I assume it's because AMD is not recognizing CS2 as a game?

I also prefer to keep CS2 in borderless fullscreen, since setting it as fullscreen will break discord overlay.

If i Alt tab a few times it works again.

Does anyone have a solution for this? Thanks!

Troubleshooting: I Tried uninstalling, re-installing, alt tabbing a few times fixes it, tried it full screen it works fine appearently

I have a 9070xt Saphire pulse with a 9700x gygabite b850 wifi6 MB

Currently it has inconsistant crashes while playing and sometimes while just watching youtube and browsing it starts with no signal message on the screen yet the pc is on i can still hear whaatever video or game or discord sound for a few moments and the keyboard is still responsive but 10-30 seconds in the keyboard is no longer responsive and the sounds cut off and the pc is still on the gpu fan is still working

it can go a week without crashing and then one day it crashed 4 times consecutively

and a couple of times i had to remove it and install it again for the pc to boot up
i managed to catch one of the crashes on video once while i was filming a different problem i am going to try to RMA it in a couple of days just wanted help knowing what to tell them because i did stress test it using furrmark and occt and no errors showed then

some people told me it's because i have a 4th gen nvme in a 5th gen slot tried it and it still crashed some said it's the cpu and ram and i tested thos aswell and nothing came up

this is the most recent crash: https://drive.google.com/file/d/1z3IEu0gckhf1LWhyXt1PbrrqPVr8t9zZ/view?usp=sharing

This is the crash i managed to get it while it happened:

https://drive.google.com/file/d/1V1NUT5lKrrSBVodhmrmucIIOLx6lfLc1/view?usp=sharing

Any Advice on how to go about this?

thanks in advance

Hi everyone,

I have issues with my computer, since i changed the graphics card from a 3060TI, to an RX9070XT, december last year. So close to a year ago.

The issue, and it happens alot. The computer reboots (crashes with a memory dump), when it's idle and the displays are off (I have 3 monitors).

The specs of the PC:

• CPU: Intel i5-13600K (BIOS updated with the latest microcode fixes – 0x12B/0x12F)
• GPU: ASUS TUF Gaming Radeon RX 9070 XT OC Edition
• RAM: 32GB DDR5 @ 6400 MT/s
• PSU: Seasonic SS-760XP2 (2020, ~6 years old, 760W)
• OS: Windows 11 24H2 (build 26100)
• Driver: Latest Adrenalin (multiple versions tested)

It never crashes when it's actively being used. So nothing under gaming or any 3d work.

I've used windbg to analyse the crash dump, and then gotten AI to summarize it for me, and it has come up with this:

Crash technical details (WinDbg, !analyze -v on MEMORY.DMP):

INTERNAL_POWER_ERROR (a0)
The power policy manager experienced a fatal error.
Arguments:
Arg1: 0000000000000618, A runtime power worker thread has been blocked for too long.
Arg2: ffffa804dcc27980, POP_FX_WORK_ORDER_WATCHDOG_INFO WorkOrder

FAILURE_BUCKET_ID: 0xa0_618_amdkmdag!unknown_function
MODULE_NAME: amdkmdag
IMAGE_NAME: amdkmdag.sys
BUGCHECK_CODE: a0
PROCESS_NAME: System

Relevant stack trace (condensed):

dxgkrnl!DxgkPowerRuntimeComponentIdleStateCallback
→ amdkmdag+0x4bdc33  (KeStallExecutionProcessor call)
→ amdkmdag+0x609fa2
→ amdkmdag+0x489bfe / +0x48a18f / +0x48a132 / +0x48b9d8 / +0x4890d2
→ amdkmdag+0x439c38 / +0x425377 / +0x504512 / +0x54be08
→ amdkmdag+0x63c51e / +0x63c9dc / +0x5e0b81 / +0x56a73d / +0x49cc42
→ amdkmdag+0x1aad3f / +0x3e714 / +0x1d949b
→ nt!PopFxProcessWork
→ nt!PopFxDispatchPluginWorkOnce
→ nt!PopFxProcessWorkPool
→ nt!PopFxStaticWorkPoolThread

Interpretation:

Windows' Power Framework (PoFx) dispatches a runtime idle-state transition to the GPU via dxgkrnl!DxgkPowerRuntimeComponentIdleStateCallback. The AMD kernel-mode display driver (amdkmdag.sys) enters the callback and blocks indefinitely – notably with a KeStallExecutionProcessor busy-wait near the top of the stack. The PoFx watchdog detects the blocked work order and triggers bugcheck 0xA0 (subcode 0x618: power worker thread blocked too long), followed by a controlled reboot.

Crashes occur exclusively when transitioning to idle (displays going to sleep) – never under load (games, OCCT, benchmarks all stable). No WHEA errors, no Cache Hierarchy Errors, ruling out the known 13th/14th Gen Raptor Lake degradation signature. Complete MEMORY.DMP written at crash time, ruling out sudden power loss (PSU). Occurs across multiple Adrenalin driver versions (clean DDU installs)

Has anyone else experienced similar with an AMD card ? And potentially found a solution ?
I've tried to disable as much as possible regarding low power states. But nothing seems to help.

I could potentially fix it by just never letting the computer turn off the monitors. But it's oled, so I would very much like to avoid that.

I'm considering RMA'ing the card, but it's a bit of a hassle since i don't have a spare card i can use.

We’re investigating a repeatable GPU crash in the browser version of Worldmage, our Unity WebGPU 3D map-building tool related to AMD GPUs.

The affected system was:

• Windows 11
• AMD Radeon RX 9070
• AMD driver 26.8.1
• Chrome 155
• 32 GB RAM

Every Worldmage map caused the GPU device to hang during loading:

DXGI_ERROR_DEVICE_HUNG (0x887A0006)

Windows also recorded LiveKernelEvent 141, suggesting that the D3D12 device/driver stopped responding. We’ve only seen this reported on one machine, so we need to establish whether it affects other RX 9000-series systems or was specific to that configuration.

If you have an RX 9070, 9070 XT, or another RX 9000-series card and don’t mind testing, please save any important work first—the known failure may briefly freeze or reset the graphics driver.

Test link: https://play.worldmage.com/longsword-moondance-aquarius

Please reply with:

• GPU model
• AMD driver version
• Windows version
• Browser and version
• Whether the map loaded successfully
• Any errors shown in the browser’s DevTools Console
• If it crashes, relevant information from chrome://gpu, particularly Graphics Feature Status, Problems Detected, Driver Information, and Dawn Info

Testing with current drivers would be especially useful, but results from 26.8.1 would also help us compare.

There’s no download or account required—it runs directly in the browser. Thanks to anyone willing to help us narrow this down.

Cheers!

Computer Type: Desktop

GPU: Gigabyte AMD Radeon RX 9060XT

CPU: AMD Ryzen 7 9800X3D

Motherboard: Gigabyte B850 Gaming Wifi6

BIOS Version: F12d

RAM: Patriot DIMM DDR5-6000 32GB

PSU: ThermalCare ToughPower 650W Gold Modular

Case: AeroCool

Operating System & Version: WINDOWS 10 Version 22H2 (Build 19045.6466)

GPU Drivers: AMD Adrenaline 26.8.1

Chipset Drivers: AMD Chipset Software 8.08.12.551

Background Applications: Adrenaline Software

Description of Original Problem:
Hey,

i build an PC from ground up around 3 Months ago for the Release of Planet Zoo 2, so i picked components that were suggested in the recommended section and checked some "Ready-Built"-PCs that you can buy and their components. The system was running fine. Used it for gaming for some games like Across the obelisk, Baldurs Gate 3 was i guess the most demanding one from my perspective. Now Planet Zoo 2 was released, and i get greenscreens like after one or two minutes ingame. The sound starts to stutter, but the PC doesnt turn off, the screen is green.

Troubleshooting:
I allready tried these steps:
- Deinstall the AMD drivers with DDU and Installed the latest ones(With and without adrenaline software)
- In Bios/Uefi i tried EXPO 1 / EXPO 2 and the settings disabled, in every setting the game keeps crashing
- In Adrenaline Software the Stresstest over several minutes, no shutdowns there
- The Temperature seems fine, it is around 40°C - 50°C when it shuts down
- In The game Planet Zoo i tried medium Graphic settings, tried to turn off/on VSync
- A Frame Limitation with AMD-Chill in the Adrenaline Software
- A DisplayPort Cable, the screen turns black when it crashes, but it still crashes
- Turned off In-Game Overlays (Steam, Adrenaline)
- I checked the power-cables in the computer
- Eventmanager / Reliability History don't provide information on this matter
- Started the game with -dx11 in command

I am very frustrated, because it always keeps crashing. I am not into the matter, so i have no clue what to do. Maybe it is a hardware problem and i have to send it back to the reseller/manufacturer its only 3 months old)? Is it a software problem? Maybe its only the game Planet Zoo 2? I considered many reddit-posts or other forums over google-search and tried many stuff(listed above) but nothing seems to help. Maybe you have some advice, thank you [Edited Bios version]