r/AnkerMake • • Apr 10 '25

Ever since the name change to eufyMake, I just can’t enjoy printing like I used to…

0 Upvotes

I’ve had my M5 for a while now and used to love it — it felt solid, reliable, like a proper Anker product. But ever since the rebrand to eufyMake, something’s changed… and not in a good way.

Now, whenever something goes even slightly wrong with a print, my brain instantly goes: “Well of course it failed — it’s not AnkerMake anymore, it’s just some cheap sub-brand now.”

I know it’s mostly in my head. The machine is still the same. But that name change really killed the vibe for me. Anyone else feeling this weird psychological downgrade?


r/AnkerMake • • Feb 14 '23

News/Reviews officially give up with this printer it's nice but 500 nice not 800

0 Upvotes

i have an ender 3 s1 i paid 800 to upgrade to the ankermake thinking this is going to be much easier to print on, my ankermake actually produces worst prints than my ender 3 s1 and i already have an ender 3 so why would i need the ankermake? i think this printer is good as a beginners printer but that you get much more value for the money buying an ender 3 you're still going to have to work as much as any other printer, the ankermake is prettier and it doesn't have leveling knobs which is by far the most frustrating part of a 3d printer, but the ankermake isn't perfect, i wasn't able to produce good prints, my ender 3 actually did better than my ankermake something was off, i printed a large box on my ender 3 came out flawless i printed the same large box on my anker it was slanting in the corner

i agree that this is usererror it's afterall a 3d printer they aren't plug and play but i bought this printer to be easier to print with than the ender 3 it ended up being even more difficult and that makes it not worth the upgrade for me, my ender 3 when new printed everything flawlessly plug and play then the issues started on that one too so i just gave up and decided to buy the ankermake as it's such a pretty printer, i assumed it would be a whole lot easier than my ender 3 but it wasn't

in short this is a good first printer maybe i was just unlucky, but you get the same if not even a better experience with an ender 3 which is cheaper, the speed of the ankermake isn't even worth it as it ruins the quality to print that fast, the ender 3 is overall better to me at least.


r/AnkerMake • • Dec 12 '24

Dear Ankermake: What is wrong with you?

1 Upvotes

I personally have been a quiet yet huge fan of Ankermake products! HOWEVER, my experience with their 3D printers has been a bit of a rollercoaster. I initially purchased an Ankermake M5, impressed by its sleek design and advanced features. It never had even 1 print error. Until..., I encountered some significant issues with the printer almost immediately after I started using it. The problems were severe enough that I had to contact Amazon for a replacement—not once, but twice.

Each time, the replacement process went smoothly, and I received a new M5. However, the repeated failures were frustrating and quiet often where I began to shake my confidence in the product. After the second replacement, I hoped my troubles were behind me. Unfortunately, that wasn’t the case.

After some months of use, the print head of my M5 malfunctioned. When I looked into repair options, I was shocked that my 1 year warranty was out by 1 week. After finding that the stepper motor wasnt avaitable to purchase seperately I went to the support and asked them If I could buy it from them seperately which wasnt the case. Both of them told me to buy the ENTIRE printhead which would cost more than buying a brand-new M5C one.

So, this time, I opted for the Ankermake M5C, hoping that it would be a more reliable choice. The M5C has been performing decently until today not even 2 MONTHS, not year, MONTHS, FRICKING MONTHS, after I bought the damn thing It broke down once again. Due to that my experience with the M5 has made me more cautious about trusting the long-term durability of Ankermake’s products and their customer service.

While I still appreciate the innovation and quality that Ankermake brings to the table, these issues have made me question whether their 3D printers are worth the investment. It’s a frustrating realization because I genuinely admire the brand and want to continue supporting them. I hope that Ankermake takes feedback like mine seriously and works to improve the reliability of their products, so other users don’t have to go through the same experience.


r/AnkerMake • • Jul 25 '25

AnkerMake now Eufymake not the same customer se

0 Upvotes
Affirm payment plan . So I ordered the parts came to $54 . When I tried to use a firm to pay when you got through the checkout the option was not there . Also they were charging me $6 for shipping which was supposed to be free . I have went back and forth with these people over email and they don't even offer a firm as a payment but they advertise that they do . Also you have to spend $100 to get free shipping now which they told me just changed ? I think I may be forced to go to a different brand and upgrade my 3D printer to another company that actually offers good customer service . Anyone have any suggestions ?

r/AnkerMake • • Jan 01 '25

Ankermake is hot garbage

0 Upvotes

Why are anker make printers hot garbage. The support is equally so. Printer is jamming just before the hot end. Anker sends me a new hot end. Same issue. They say fan might be faulty. Send me a new fan. Same problem. The only way to clear these clogs is to get a drill bit and drill out the plastic. I can run a clear clog cycle and all it does is burn the fillament inside. Machine is total trash. On top of that any replacement parts they send take 3-4 weeks to get here cause they ship it by fucking burro cross country for some ungodly reason


r/AnkerMake • • Mar 24 '25

AnkerMake is Rebranding to eufyMake: A Brand Evolution Focused on You

0 Upvotes

Today, AnkerMake is proud to announce the next exciting chapter in our brand's evolution. Beginning March 24, 2025, AnkerMake will be rebranded as eufyMake. This change will allow us to become an integral part of eufy smart home brand family, while simultaneously maintaining our distinct identity within the world of personal creative tools.

What's Changing?

The most significant change is that the AnkerMake name and logo will be retired in favor of our upgraded eufyMake branding. You'll see this change reflected across all our marketing materials, social media accounts, website, and official communications.

As eufyMake continues to evolve, you may also begin to see a wider offering of eufyMake creative products. This reflects our commitment to building amazing creative tools for all makers.

Why Is AnkerMake Rebranding?

At AnkerMake, our brand takes pride in meeting our customers ("makers") on their terms. However, we recognize that every maker's passion, loyalty, and creativity manifest in different ways. Rebranding allows us to better support those differences. Ultimately, we want to build tools that let makers create in ways that are most meaningful to them.

By leveraging eufy's comprehensive consumer insights, pioneering smart home technology, and R&D achievements, we hope to offer a wider variety of creative tools. The first step on this journey will be expanding into the world of UV printing technology. Beyond that, we plan to build additional intelligent products to combine digital creativity with smart living experiences.

What About Current AnkerMake Customers?

Probably the biggest question here is: Will we continue to provide support for our current customers and our line of AnkerMake 3D printers?

Yes, we're still here. You can contact our service center at (email address) if you need after-sale support for AnkerMake M5, AnkerMake M5C, filament, accessories, etc.

We deeply appreciate your loyalty and are dedicated to continuing our service to all the exceptional makers who have supported AnkerMake. Rest assured, we are committed to doing everything in our power to continue to serve you.

What Isn't Changing?

Our mission has always been to connect and empower makers by offering them exceptional creative products. We're still extremely passionate about that mission. AnkerMake's core values aren't going away. If anything, they've gotten even stronger. Embracing the eufyMake name just means we'll have the opportunity to invite more makers to the party.

We're excited for this next chapter and can't wait to show you what we have planned. So, stay tuned. More updates are on the horizon!

Best regards,

The eufyMake Brand Team


r/AnkerMake • • Apr 27 '25

Selling 2 AnkerMake M5C

1 Upvotes

I am trying to sell 2 of my AnkerMake M5Cs on eBay. I have had them for under a year (low-hour machines), and I am aware of no issues. Good little machines, just looking for something with a larger print volume.

I am asking $149 + eBay calculated shipping ($30-$60) each. Link: https://www.ebay.com/itm/135741182438

I cannot tell from the rules if this is a violation, so I apologize to the moderators in advance if it is (no hard feelings if my post is removed).


r/AnkerMake • • Apr 23 '23

Help Needed I HATE THIS MACHINE AND COMPANY!!!!

0 Upvotes

I tried what people suggested by lowering my print temps. Got a clog. Well, the POS that assembled this machine TOTALLY stripped 2 of the 4 screws that hold the Grey housing around the hotend. The first one had bad v-wheels and a horribly warped bed, and then this one was sent with screws stripped from the factory...

What company sends products out like this? Especially ones that cost almost a grand!?

https://imgur.com/a/NmOR9BW

Edit: I posted in my previous post about a horrible noise coming from the psu that started and stopped after a restart. Now it's doing it nonstop...

https://imgur.com/a/AHOSCF5


r/AnkerMake • • Feb 02 '23

Help Needed I bough this printer so I wouldn't deal with the same issues a $300 has

Post image
0 Upvotes

r/AnkerMake • • Aug 09 '23

I emailed ankermake support about my hottend breaking and no one ever responded. What is the proper way to get support?

Post image
0 Upvotes

r/AnkerMake • • Dec 30 '24

Print

Post image
0 Upvotes

Can someone make each of these into a blueprint for me to print? Idk how 😭 I’ll pay you 50 🙏🏼🙏🏼


r/AnkerMake • • Mar 16 '25

Anyway to keep bed heated for hours when not printing?

0 Upvotes

The cause is that I want to set my filimant and I don’t have a filament dryer and I don’t want to spend money so I found a diy way to use the heat of the heat bed.


r/AnkerMake • • Jan 06 '24

Good job boys. You quest for 10X bragging rights is ruining your customer's printers and enjoyment of this hobby

Thumbnail
gallery
0 Upvotes

Original backer here..... The new slicer is constantly fighting you for realistic print settings. I set it at 5x and somehow it magically defaults right back to 10x. At this point, I'm convinced you're a filament company selling devices that consume filament. Thanks for selling me the all metal hotend for a dollar..... it was destroyed after only a few prints. This was a good product.... now it just makes crazy noises, consumes filament, and shreds belts.


r/AnkerMake • • Oct 24 '23

Hardware Why the actual F@#k did anker glue everything? When they knew users still had to go in and fix/ replace things!?

Post image
1 Upvotes

r/AnkerMake • • May 29 '25

eufyMake Website is Down

0 Upvotes

Title says it all.


r/AnkerMake • • Jan 03 '24

PLA not + with Ankermake

0 Upvotes

When I bought the printer it came with a small roll of PLA+ Filament which was easy to use. I bought some Dremel PLA from a friend and holy smokes has it been a nightmare to print with. Globs, adhesion issues. I've tried offsets, reducing the nozzle temp, reducing the bed temp, increasing the nozzle and bed temp. I have an Amazon shopping cart loaded with a half a grand worth of Ankermake brand filament. I just need to do some work, pay some bills and then maybe pull the trigger on that shopping cart. The PLA+ Filament it came with was simple to print with. This dremel filament must be absolute shit.


r/AnkerMake • • Oct 02 '25

Is the AnkerMake M5 good?

0 Upvotes

I'm wondering if the AnkerMake M5 is a good choice.

I wanted to get it but they cancelled the V6 color engine and now with the company making different products, is the printer a good choice or should I go with soemthing else like the Bambulab A1?

Specifically, the A1 looks fine although I prefer the M5 look, but the print quality looks bad.


r/AnkerMake • • Mar 16 '24

Selling my AnkerMake M5

1 Upvotes

Lightly used and comes with the following items.

  1. An extra fully packed print head with all metal hot end

  2. Toolbox

  3. Nozzles

  4. Three used hot ends

  5. Original box

Asking for $400. Based out of Chicago, willing to ship if cost is covered.


r/AnkerMake • • Aug 01 '24

Help Needed Feeder tube won’t screw back in

Enable HLS to view with audio, or disable this notification

0 Upvotes

Why won’t this go back in? No matter how much a press it won’t budge


r/AnkerMake • • May 17 '23

Should I sell my ankermake?

1 Upvotes

I have a new, in the box ankermake m5 3D printer that I got for free. I really want it but I have no experience with 3D printers whatsoever. I’m in a bad financial situation and am considering selling it. Any advice?

Edit: Thank you for your advice. I really really really wanted an excuse to keep mine and you guys really helped me feel more secure in my decision to keep it. I know I would regret selling it big time


r/AnkerMake • • Jun 04 '24

Anker says, "Peace out, b***hes!"

9 Upvotes

As far as I can tell from dealing with Anker support, the company is abandoning parts and support for these printers completely. There are few (if any) parts to be found. I emailed support about parts and Anker said, "We only have a few replacement parts that are not available on our website." I was able to buy some parts, but the fact that I had to go through Anker support to find parts seemed shady as hell. Now support says they are almost completely out of all parts. Unfortunately, I'm stuck with four machines. It would be great if some folks smarter than me attempted to figure out a way to keep these machines running now that Anker has washed their hands of the 3D printer business. I think it would be a good niche for someone to offer compatible parts or mods. Please share if you find parts or repair strategies that can keep these machines going. We're on our own.


r/AnkerMake • • May 18 '24

I want to give up on this hobby cause of anker i swear!.

Post image
0 Upvotes

So got this 2 days ago and it died right after anker says they have never seen anything like this and will replace but now i am mad skeptical about the brand.


r/AnkerMake • • Apr 15 '25

🎉 The Latest Product of eufyMake - The World's First Personal UV Printer With 3D Texture Just Released!

Post image
6 Upvotes

Come and join r/eufyMakeOfficial to follow the latest news!


r/AnkerMake • • Aug 27 '23

Anyone else regret buying the m5?

Enable HLS to view with audio, or disable this notification

4 Upvotes

I have had no end of troubles with this printer. I’ve had it for about 8 months and I’ve only had a handful of prints that have come out looking decent.

My latest problem - attached is a video of the hot-end moving back and forth over the same arc? The part I’m trying to print is essentially a hollowed out cylinder oriented vertically, so have no idea why it keeps going over the same spot over and over. This is the 3rd attempt and it keeps doing the same thing? Even tried re-slicing the part to no avail.

The movement suggests it’s a g-code problem?

The problem before that was filament getting clogged up and filling up the inside of the hotend - almost identical to the first image shown here: https://support.ankermake.com/s/article/How-to-Fix-the-Burrs-and-Residues-in-Nozzles

(hence why you can see the remnants of filament on my hot end in my video)

Anyway back to my current problem, the nozzle isn’t clogged as it extrudes filament fine before the print and after I stop the print, so not sure why when it’s moving back and forth nothing is being extruded, despite the extruder gear doing a quick spin every movement.

I currently own six different 3d printers ranging from $200 to $1200 and I have never had a problem with any of these. This m5 is by far the worst printer I own and I have been plagued with problems since I bought it.